User talk:Culturanu

This is Culturanu's talk page, where you can send them messages and comments.

Put new text under old text. Click here to start a new topic.
New to Wikipedia? Welcome! Learn to edit; get help.

Your submission at Articles for creation: Alpha Design & Build Projects Ltd. (March 15)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Robert McClenon was:

This submission's references do not adequately show the subject's notability. Wikipedia requires significant coverage about the subject in reliable sources that are independent of the subject—see the guidelines on the notability of organizations and companies and the golden rule. Please improve the submission's referencing (see Wikipedia:Referencing for beginners), so that the information is verifiable, and there is clear evidence of why the subject is notable and worthy of inclusion in an encyclopedia. If additional reliable sources cannot be found for the subject, then it may not be suitable for Wikipedia at this time.

The comment the reviewer left was:

This draft has no references. It also appears to be promotional for a non-notable company.

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Alpha Design & Build Projects Ltd. and click on the "Edit" tab at the top of the window.
If you need any assistance, you can ask for help at the Articles for creation help desk or on the reviewer's talk page.
You can also use Wikipedia's real-time chat help from experienced editors.

Robert McClenon (talk) 17:39, 15 March 2017 (UTC)[reply]

Hello! Culturanu, I noticed your article was declined at Articles for Creation, and that can be disappointing. If you are wondering why your article submission was declined, please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! Robert McClenon (talk) 17:39, 15 March 2017 (UTC)[reply]

Scaffold design

" It is a requirement of the Work at Height Regulations 2005 that unless a scaffold is assembled to a generally recognised standard configuration, eg NASC Technical Guidance TG20 for tube and fitting scaffolds or similar guidance from manufacturers of system scaffolds, the scaffold should be designed by bespoke calculation, by a competent person, to ensure it will have adequate strength, rigidity and stability while it is erected, used and dismantled. "

                                                  Health & Safety Executive

Scaffolding design consist a combination of Structural analysis and CAD Drawings.

Structural analysis is the determination of the effects of loads on physical structures and their components.
Structural analysis employs the fields of applied mechanics, materials science and applied mathematics to compute a structure's deformations, internal forces, stresses, support reactions, accelerations, and stability.
The results of the analysis are used to verify a structure's fitness for use, often precluding physical tests.  Structural analysis is thus a key part of the engineering design of structures.

CAD Drawings known as computer-aided drafting (CAD), which includes the process of creating a technical drawing with the use of computer software. CAD may be used to design curves and figures in two-dimensional (2D) space or curves, surfaces, and solids in three-dimensional (3D) space. 3D wireframe is basically an extension of 2D drafting (not often used today). Each line has to be manually inserted into the drawing. CAD is used to create scaffold drawings.

A structural system is the combination of structural elements and their materials. It is important for a structural engineer to be able to classify a structure, in our case a scaffold structure, by either its form or its function, by recognizing the various elements composing that scaffolding structure. The structural scaffold elements guiding the systemic forces through the materials are not only such as a connection, a truss, a beam, or a column, but also a cable, an arch, a cavity or channel, and even an angle, a surface structure, or a frame. Once the dimensional requirement for a scaffold structure have been defined, it becomes necessary to determine the loads the scaffold must support. In order to design a scaffolding structure, it is therefore necessary to first specify the loads that act on it. The design loading for a scaffold structure is often specified in design codes. The engineer must satisfy all the codes requirements for a reliable scaffolding structure.

There are two types of loads that structure engineering must encounter in the design. First type of load is called Dead loads that consist of the weights of the various structural members and the weights of any objects that are permanently attached to the scaffolding structure. For example: tubes, fittings, beams, roofing, and other miscellaneous attachments. Second type of load is Live Loads which vary in their magnitude and location. There are many different types of live loads like scaffold boards, materials loads, dynamic loads, impact loads, wind loads, snow loads, earthquake loads, and other natural loads.

Speedy deletion nomination of Scaffold design

If this is the first article that you have created, you may want to read the guide to writing your first article.
You may want to consider using the Article Wizard to help you create articles.

A tag has been placed on Scaffold design requesting that it be speedily deleted from Wikipedia. This has been done under section G12 of the criteria for speedy deletion, because the page appears to be an unambiguous copyright infringement. This page appears to be a direct copy from http://www.engineersedge.com/analysis/structural_analysis_review_9712.htm. For legal reasons, we cannot accept copyrighted text or images taken from other web sites or printed material, and as a consequence, your addition will most likely be deleted. You may use external websites or other printed material as a source of information, but not as a source of sentences. This part is crucial: say it in your own words. Wikipedia takes copyright violations very seriously and persistent violators will be blocked from editing.

If the external website or image belongs to you, and you want to allow Wikipedia to use the text or image — which means allowing other people to use it for any reason — then you must verify that externally by one of the processes explained at Wikipedia:Donating copyrighted materials. The same holds if you are not the owner but have their permission. If you are not the owner and do not have permission, see Wikipedia:Requesting copyright permission for how you may obtain it. You might want to look at Wikipedia's copyright policy for more details, or ask a question here.

If you think this page should not be deleted for this reason, you may contest the nomination by visiting the page and clicking the button labelled "Contest this speedy deletion". This will give you the opportunity to explain why you believe the page should not be deleted. However, be aware that once a page is tagged for speedy deletion, it may be removed without delay. Please do not remove the speedy deletion tag from the page yourself, but do not hesitate to add information in line with Wikipedia's policies and guidelines. Adem20^talk 14:25, 28 April 2017 (UTC)[reply]

Your draft article, Draft:Alpha Design & Build Projects Ltd.

Hello, Culturanu. It has been over six months since you last edited the Articles for Creation submission or Draft page you started, "Alpha Design & Build Projects Ltd.".

In accordance with our policy that Wikipedia is not for the indefinite hosting of material deemed unsuitable for the encyclopedia mainspace, the draft has been nominated for deletion. If you plan on working on it further, or editing it to address the issues raised if it was declined, simply edit the submission and remove the {{db-afc}}, {{db-draft}}, or {{db-g13}} code.

If your submission has already been deleted by the time you get there, and you wish to retrieve it, you can request its undeletion by following the instructions at this link. An administrator will, in most cases, restore the submission so you can continue to work on it.

Thanks for your submission to Wikipedia, and happy editing. Legacypac (talk) 10:37, 19 September 2017 (UTC)[reply]