User talk:Biswas a

Welcome Biswas a!

Now that you've joined Wikipedia, there are 48,477,240 registered users!

Hello, Biswas a. Welcome to Wikipedia and thank you for your contributions! I'm Paine Ellsworth, one of the other editors here, and I hope you decide to stay and help contribute to this amazing repository of knowledge.

Some pages of helpful information to get you started:

Introduction to Wikipedia

The five pillars of Wikipedia

Editing tutorial

How to edit a page

Simplified Manual of Style

The basics of Wikicode

How to develop an article

How to create an article

Help pages

What Wikipedia is not

Some common sense Dos and Don'ts:

Do be bold

Do assume good faith

Do be civil

Do keep cool!

Do maintain a neutral point of view

Don't spam

Don't infringe copyright

Don't edit where you have a conflict of interest

Don't commit vandalism

Don't get blocked

If you need further help, you can:

Ask a question

or you can:

Get help at the Teahouse

or even:

Ask an experienced editor to "adopt" you

Alternatively, leave me a message at my talk page or type {{helpme}} here on your talk page, and someone will try to help.

There are many ways you can contribute to Wikipedia. Here are a few ideas:

Fight vandalism

Be a WikiFairy or a WikiGnome

Help contribute to articles

Perform maintenance tasks

Become a member of a project that interests you

Help design new templates

Remember to always sign your posts on talk pages. You can do this either by clicking on the button on the edit toolbar or by typing four tildes (~~~~) at the end of your post. This will automatically insert your signature, a link to this (your talk) page, and a timestamp.

The best way to learn about something is to experience it. Explore, learn, contribute, and don't forget to have some fun!
To get some practice editing you can use a sandbox. You can create your own private sandbox for use any time. Perfect for working on bigger projects. Then for easy access in the future, you can put {{My sandbox}} on your user page. By the way, seeing as you haven't created a user page yet, simply click here to start it.

Sincerely, Thank you! and Best of everything to you and yours! – Paine 15:40, 19 April 2015 (UTC) (Leave me a message)[reply]

Pacinian corpuscle

Hello Biswas a - re your comments on recent edits - knowledgeable edits are of course always welcome and your points are interesting. You mentioned having references used in your thesis and I wondered if it was possible for you to add these to your edits? My own knowledge of the subject is quite superficial. Best --Iztwoz (talk) 10:01, 28 June 2021 (UTC)[reply]

Hi Iztwoz,

I shall do my best to add those primary references. It needs some time from my side. Also I shall request my research students who are working in this area to improve that page further.

Thanks.

--Abhijit Biswas

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 8)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by JavaHurricane were:

This submission is not adequately supported by reliable sources. Reliable sources are required so that information can be verified. If you need help with referencing, please see Referencing for beginners and Citing sources.

This submission's references do not show that the subject qualifies for a Wikipedia article—that is, they do not show significant coverage (not just passing mentions) about the subject in published, reliable, secondary sources that are independent of the subject (see the guidelines on the notability of organizations and companies). Before any resubmission, additional references meeting these criteria should be added (see technical help and learn about mistakes to avoid when addressing this issue). If no additional references exist, the subject is not suitable for Wikipedia.

The comment the reviewer left was:

Please remove all the external links in the prose, and convert boldface content to normal content per MOS:BOLD.

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Java Hurricane 07:00, 8 July 2021 (UTC)[reply]

Hello, Biswas a! Having an article declined at Articles for Creation can be disappointing. If you are wondering why your article submission was declined, please post a question at the Articles for creation help desk. If you have any other questions about your editing experience, we'd love to help you at the Teahouse, a friendly space on Wikipedia where experienced editors lend a hand to help new editors like yourself! See you there! Java Hurricane 07:00, 8 July 2021 (UTC)[reply]

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by KylieTastic were:

This submission is not adequately supported by reliable sources. Reliable sources are required so that information can be verified. If you need help with referencing, please see Referencing for beginners and Citing sources.

This submission's references do not show that the subject qualifies for a Wikipedia article—that is, they do not show significant coverage (not just passing mentions) about the subject in published, reliable, secondary sources that are independent of the subject (see the guidelines on the notability of organizations and companies). Before any resubmission, additional references meeting these criteria should be added (see technical help and learn about mistakes to avoid when addressing this issue). If no additional references exist, the subject is not suitable for Wikipedia.

The comment the reviewer left was:

Most of the content in unsourced, lacks sources with significant coverage, some sources do not appear to back claims

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

KylieTastic (talk) 09:15, 11 July 2021 (UTC)[reply]

Hi KylieTastic,

I have further edited this page addressing your concerns. Please review it.

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reasons left by Pahunkat were:

This submission's references do not show that the subject qualifies for a Wikipedia article—that is, they do not show significant coverage (not just passing mentions) about the subject in published, reliable, secondary sources that are independent of the subject (see the guidelines on the notability of organizations and companies). Before any resubmission, additional references meeting these criteria should be added (see technical help and learn about mistakes to avoid when addressing this issue). If no additional references exist, the subject is not suitable for Wikipedia.

This submission is not adequately supported by reliable sources. Reliable sources are required so that information can be verified. If you need help with referencing, please see Referencing for beginners and Citing sources.

The comment the reviewer left was:

Some sections completely unsourced. Needs better sources to establish notability - WP:NCORP, WP:CORPDEPTH

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Pahunkat (talk) 11:32, 11 July 2021 (UTC)[reply]

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 11)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Timtrent was:

I am not altogether sure why an article first created 2007 is in AFC.

Be that as it may I think there is a basic understanding of referencing. Please take a pace back and read about what we need:

We require references from significant coverage about the topic of the article, and independent of it, in multiple secondary sources which are WP:RS please. See WP:42. Please also see WP:PRIMARY which details the limited permitted usage of primary sources and WP:SELFPUB which has clear limitations on self published sources. Providing sufficient references, ideally one per fact referred to, that meet these tough criteria is likely to allow this article to remain. Lack of them or an inability to find them is likely to mean that the topic is not suitable for inclusion, certainly today.

What you seem to have done is provided references for topics within the article, but which do not show that the centre itself p[assws WP:CORP. The objective to to pass that.

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Fiddle^Timtrent Faddle^Talk to me 20:20, 11 July 2021 (UTC)[reply]

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 12)

Your recent article submission to Articles for Creation has been reviewed! Unfortunately, it has not been accepted at this time. The reason left by Theroadislong was:

This submission appears to read more like an advertisement than an entry in an encyclopedia. Encyclopedia articles need to be written from a neutral point of view, and should refer to a range of independent, reliable, published sources, not just to materials produced by the creator of the subject being discussed. This is important so that the article can meet Wikipedia's verifiability policy and the notability of the subject can be established. If you still feel that this subject is worthy of inclusion in Wikipedia, please rewrite your submission to comply with these policies.

The comment the reviewer left was:

poorly sourced and promotional

Please check the submission for any additional comments left by the reviewer. You are encouraged to edit the submission to address the issues raised and resubmit when they have been resolved.

If you would like to continue working on the submission, go to Draft:Centre for Product Design and Manufacturing and click on the "Edit" tab at the top of the window.
If you now believe the draft cannot meet Wikipedia's standards or do not wish to progress it further, you may request deletion. Please go to Draft:Centre for Product Design and Manufacturing, click on the "Edit" tab at the top of the window, add "{{Db-g7}}" at the top of the draft text and click the blue "publish changes" button to save this edit.
If you do not make any further changes to your draft, in 6 months, it will be considered abandoned and may be deleted.
If you need any assistance, or have experienced any untoward behavior associated with this submission, you can ask for help at the Articles for creation help desk, on the reviewer's talk page or use Wikipedia's real-time chat help from experienced editors.

Theroadislong (talk) 20:01, 12 July 2021 (UTC)[reply]

Wikipedia's "conflict of interest" guideline, and other related issues

If you are connected to someone or something you have written about (a few examples are writing about yourself, your business, your band, a member of your family, your client) then you should be aware that Wikipedia's conflict of interest guideline discourages you from writing about that subject. The main reason for that is that experience over the years indicates that editors with such a connection to a subject they are writing about are likely to find it very difficult, or even impossible, to stand back from their writing and see how it will look from the detached perspective of an outsider, so that they are likely to write in ways that look promotional to others, even if they sincerely think they are writing in a neutral way. Also, if your editing forms all or part of work for which you are paid, whether as an employee, as a contractor, or in any other capacity, the Wikimedia Foundation's terms of use require you to state who is paying you, and what your connection to them is. (To avoid the possibility of a surprisingly common misunderstanding, editing is part of paid work if it is done as part of normal employment or as part of a work to a contract, whether or not a specific payment earmarked for editing Wikipedia is made.)JBW (talk) 09:40, 13 July 2021 (UTC)[reply]

Hi JBW, I agree with this point of view of Wikipedia. Only point is that there was a page created long back (in 2007) which is now deleted. I just wanted to address the issues for which it was deleted. I have not seen this page before 2020 July, the time I joined CPDM. As I am now involved this organization, I think someone else outside from this organization should take the responsibility of restoring the page. Hope Wikipedia reviewers will apply this policy across all the pages and I completely support that. Thanks for clarifying this. Biswas a (talk)

Your submission at Articles for creation: Centre for Product Design and Manufacturing (July 23)

Your recent article submission has been rejected. If you have further questions, you can ask at the Articles for creation help desk or use Wikipedia's real-time chat help. The reason left by Tamingimpala was: This topic is not sufficiently notable for inclusion in Wikipedia. The comment the reviewer left was: Rejecting as the re-submission is persistent despite the previous declinations.

Tame (talk) 21:01, 23 July 2021 (UTC)[reply]