Jump to content

Transverse arch

From Wikipedia, the free encyclopedia
A series of arches across the tunnel vault

In architecture, a transverse arch is an arch in a vaulted building that goes across the barrel vault. A series of transverse arches sitting on tops of the columns on the sides of the nave was typical in the churches of Romanesque architecture. By analogy, the term is also used to describe the transverse ribs of a groined vault and for any crosswise arch in modern buildings.[1]

In the historical buildings, the transverse arches provide support for purlins and roof ridge beams. They also subdivide the nave into bays.[2] The springings of the arch are typically pinned to supports using wooden or steel ties, but the bulk of lateral thrust is terminated in the abutments.[3]

See also

[edit]
  • Diaphragm arch, a transverse arch with the wall on top that divides the vault into compartments
  • Separating arch, an arch parallel to the sides of the nave

References

[edit]
  1. ^ Davies & Jokiniemi 2008, p. 391.
  2. ^ Bolis et al. 2017, p. 285.
  3. ^ Giuriani et al. 2009, p. 4, page numbers are for the online copy.

Sources

[edit]
  • Bolis, Valentino; Preti, Marco; Marini, Alessandra; Giuriani, Ezio (2017). "Experimental cyclic and dynamic in-plane rocking response of a masonry transverse arch typical of historical churches". Engineering Structures. 147: 285–296. doi:10.1016/j.engstruct.2017.05.058.
  • Davies, N.; Jokiniemi, E. (2008). "transverse arch". Dictionary of Architecture and Building Construction. Elsevier/Architectural Press. p. 391. ISBN 978-0-7506-8502-3. Retrieved 2024-12-22.
  • Giuriani, Ezio; Marini, Alessandra; Porteri, Claudia; Preti, Marco (2009-04-28). "Seismic Vulnerability for Churches in Association with Transverse Arch Rocking". International Journal of Architectural Heritage. 3 (3): 212–234. doi:10.1080/15583050802400240. ISSN 1558-3058.