Jump to content

Talk:PT-76

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

I don't know who wrote that the PT-76 was replaced by the BMP-1 but that's not the case. The two were designed for quite different missions and while some operators might have used the BMP as a light tank the Soviets didn't use it for that.

Wasn't the PT-76 replaced by the BMP-R in the reconnaissance role (the statement in the article is still wrong)? Michael Z. 2005-07-13 14:25 Z

August Coup

[edit]

I saw a picture of more than 15 of these going down Moswcow streets,but they could have been the BMP-1. Dudtz 7/20/05 2:19 PM EST

Plavayushchy or Plavuchii

[edit]

Our article says "Plavayushchy Tank (Плавающий Танк)", but I have a published source that says Plavuchii Tank. Any idea which is correct, or if it even matters? Michael Z. 2005-10-21 17:09 Z


"Плавающий" literally means "one that swims" (i.e. has one role and that is swimming), whereas "плавучий" is more like "amphibious". Hence logically, it would seem that the tank was called the latter but I have no certain information about this --72.137.194.104 00:09, 7 January 2006 (UTC)[reply]

Volgograd Tractor Factory

[edit]

I changed the factory's name which built the PT-76 but on the following website it states the vehicle wasn't built there until 1958.
http://www.aeronautics.ru/archive/armored_vehicles/pt-76.htm

Ben Het

[edit]

According to this the clash at Ben Het took place on 3 March 1970, not 3 March 1969. Meanwhile the WikiCommons image of the destroyed tank gives the year as 1968. Which of these is correct? Drutt (talk) 07:05, 8 March 2008 (UTC)[reply]

On closer examination, both the 1969 and 1970 dates are stated by this source, so I'll assume the 1970 date is a misprint. Drutt (talk) 07:17, 8 March 2008 (UTC)[reply]


Copyediting

[edit]

I have just spent most of a weekend editing this article down from a massive 56000 bytes to a more managable (and comprehensible) 48000, a lot more could be trimmed I'm sure, but I'm not the one to do it; what is the optimal article length?

There are still some things that I don't understand. For instance, there are over 60 template and 9 category entries on the edit page. but I can't get at them. Don't they need editing as well? If so, how? RASAM (talk) 18:51, 17 May 2009 (UTC)[reply]

Number built.

[edit]

Hello, the data table says approximately 12,000 vehicles were built, but the service history mentions 5,000 with 2,000 being exported; is it possible to clarify the correct number please. — Preceding unsigned comment added by 86.177.42.131 (talk) 19:33, 2 November 2012 (UTC)[reply]

"Its V-6 6-cylinder 4-stroke in line water-cooled diesel engine..."

[edit]

"Its V-6, 6-cylinder, 4-stroke, in line, water-cooled, diesel engine..." The engine is a water cooled, 4-stroke diesel, and it has 6 cylinders, but is it a v6, or does "in line" describe the water cooling? — Preceding unsigned comment added by 72.185.65.202 (talk) 19:37, 25 November 2012 (UTC)[reply]

V-6 is the model number of the engine, which is a straight six - effectively half of the V12 engine that powers the T-54.Nigel Ish (talk) 20:14, 25 November 2012 (UTC)[reply]
I rewrote the sentence so it should be less confusing. BP OMowe (talk) 19:54, 30 October 2013 (UTC)[reply]
Came here due to my confusion from the infobox- trying to think of a concise way to improve the "engine" entry there. Perhaps "Model V-6"?
JakeZambas (talk) 07:56, 31 March 2023 (UTC) JakeZambas (talk) 07:56, 31 March 2023 (UTC)[reply]
[edit]

Hello fellow Wikipedians,

I have just added archive links to one external link on PT-76. Please take a moment to review my edit. If necessary, add {{cbignore}} after the link to keep me from modifying it. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true to let others know.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 10:02, 7 January 2016 (UTC)[reply]

Iran

[edit]

This source, which itself cites Islamic Republican newspaper, 10/3/90 (Solar Hejri calender), mentions "one GSP bridge company" participating in Operation Beit-ol-Moqaddas. It is apparently refering to the Zafar Company, 414th Combat Engineer Battalion of Ground Forces of Islamic Republic of Iran Army which participated in the operation. --Z 08:39, 5 July 2016 (UTC)[reply]

Issue with vane design description in 'Water Mobility' subsection

[edit]

The section states "When not in use the trim vane is stowed in the front of the bow over the barrel of the main gun and serves as additional armor." It's talking about a slab of metal that assists in planing, called the 'bow flap' in the failed Marine Corps Expeditionary Fighting Vehicle. Even without looking at pictures of the PT-76, one has to think 'how in the hell would it fold over the barrel of the main gun?' Then looking at images of the tank it looks like it just folds about 10" over the lip of the upper glacis plate.

I'm almost positive that's not right, but since I don't know anything about this particular tank I figured I would just mention it here. Some Soviet amor expert take it from here. — Preceding unsigned comment added by SoLongSidekick (talkcontribs) 22:53, 13 July 2018 (UTC)[reply]

Water "inlets" on hull

[edit]

"There are also additional assistant water-jet inlets on both sides of the hull over the last road wheels."

From the following description of how the system works, those would appear to be the reverse flow outlets that let the vehicle reverse and take over the water flow when the main outlets are closed. I see no other openings our ports that look like they would work for that, and from the photograph of the swimming PT-76s, they are far too high above the water to function as inlets anyway. Maybe the editor just wasn't aware that "inlet" specifically means an opening for the entry of a fluid, rather than a general term for any port.

Although are we sure that those are actually swimming tanks in that photo? I didn't expect it to float anywhere near that high in the water. I thought they were just fording in that photograph. As far as I can tell that leaves more that half of the volume of the hull above water level, which is usual for an armored amphibious vehicle. I guess those hollow road wheels really help a lot. Idumea47b (talk) 16:57, 4 March 2024 (UTC)[reply]