Murray River road and railway bridge, Tocumwal is within the scope of WikiProject Australia, which aims to improve Wikipedia's coverage of Australia and Australia-related topics. If you would like to participate, visit the project page.AustraliaWikipedia:WikiProject AustraliaTemplate:WikiProject AustraliaAustralia
This article is within the scope of WikiProject Historic sites, a collaborative effort to improve the coverage of historic sites on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.Historic sitesWikipedia:WikiProject Historic sitesTemplate:WikiProject Historic sitesHistoric sites
This article is within the scope of WikiProject Trains, an attempt to build a comprehensive and detailed guide to rail transport on Wikipedia. If you would like to participate, you can visit the project page, where you can join the project and/or contribute to the discussion. See also: WikiProject Trains to do list and the Trains Portal.TrainsWikipedia:WikiProject TrainsTemplate:WikiProject Trainsrail transport
This article is within the scope of WikiProject Bridges and Tunnels, a collaborative effort to improve the coverage of bridges and tunnels on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.Bridges and TunnelsWikipedia:WikiProject Bridges and TunnelsTemplate:WikiProject Bridges and TunnelsBridge and Tunnel
The Tocumwal Rail Bridge is not on the Narrandera-Tocumwal railway line (i.e. Tocumwal railway line, New South Wales), it is on the Seymour-Tocumwal railway line (i.e. Tocumwal railway line, Victoria). Tocumwal is a break of gauge station. It is the Victorian Railways broad gauge line that crosses the river to meet the station, the NSWGR standard gauge line stops at the station and does not cross the river. Please correct. -- Mattinbgn (talk) 06:03, 16 June 2018 (UTC)[reply]
Assuming that this bridge was made too early to use mild steel, it would be made out of wrought iron. Although there might be a little cast iron used in specific places where it is not in tension or shear, the structural members are too long to be made out of (brittle) cast iron. TrimmerinWiki (talk) 08:41, 20 July 2024 (UTC)
Further to above, the link here (https://www.hms.heritage.nsw.gov.au/App/Item/ViewItem?itemId=5012248 ) says the the bridge has wrought iron trusses, but that there are mild steel stringers and cross-girders in the two side spans (presumably under the deck, and probably as a result of the strengthening of the original bridge to take rail traffic in 1908) and wrought iron cross-girders in the lifting span.TrimmerinWiki (talk) 10:17, 20 July 2024 (UTC)[reply]