railML

Railway Markup Language

Logo of railML file format
Filename extensions	.railml, .railmlx
Internet media type	application/xml, text/xml, application/zip
Developed by	railML.org; Dresden / Germany
Initial release	22 December 2005 (2005-12-22)
Latest release	3.3 5 November 2024 (2024-11-05)
Type of format	Railway exchange format
Extended from	XML
Standard	Industry standard
Open format?	No, CC BY-NC-ND with restrictions
Website	www.railml.org

railML (Railway Markup Language) is a proprietary freeware XML Schema-based data exchange format for data interoperability of railway applications.

Motivation

Advantage of a universal exchange format

The growing number of computer applications modeling different aspects of railway operations, with different operators developing separate solutions parallelly, bore a chronic difficulty of connecting different railway IT applications. The exchange of data for operation concepts, slot management, simulation or infrastructure planning, etc. was possible either by hand or with a lot of special developed interfaces with loss of time and cost problems for railway companies. If there are n applications that are supposed to exchange data, with a special interface for each pair of programs respectively, ${\frac {n\cdot (n-1)}{2}}$ interfaces are required—only one, if n=2, but 10, if n=5—increasing the complexity above average.

This problem can be mitigated by means of enterprise application integration with a single, universal exchange format that is supported by all applications and meets the needs of all kinds of data exchange in the field of railway operation: The number of required interfaces decreases to n—one interface to the exchange format for each application respectively. railML tries to place at disposal a free and self-describing format close to existing standards. The paradigm is to meet the demands of the data exchange processes of railways, industry and authorities rather than describing the complete railway system.

Outline

History

The development of railML was initiated in early 2002 by the Fraunhofer-IVI (Dresden, Germany) and the ETH Zürich – IVT (Zurich, Switzerland) against the background of the chronic difficulty of connecting different railway IT applications. railML is changed and adapted to the needs of railway infrastructure managers (IMs) and railway undertakings (RUs) within discussions. The first stable version 1.0 was released in 2005 for productive usage. Up to now the versions 1.0; 1.1; 2.0 to 2.5 were released for download and productive use. railML's version 3, incorporating a new topology model based on the RailTopoModel, underwent development starting in mid-2015. The beta version was released in mid-2016, followed by the full release of version 3.1 for productive use in February 2019. The schema evolved further, with version 3.2 being released in 2022, and the latest version 3.3, launched in 2024, based on RailTopoModel v1.5. This version introduced new enhancements, consolidating the evolution of the railML format. Additionally, in 2015, viewer and validator for railML data, named railVIVID, was released.

Working principle

railML (railway mark-up language) is a common exchange format, which employs XML for the description of rail-specific data. railML enables the exchange of railway data between internal and external railway applications. railML is developed within the so-called “railML consortium” from railML.org. The model language of railML is UML and the documentation language is English. Every railML developer and user is invited to contribute or propose scheme extensions.

Applications can exchange data via railML either via exporting respectively importing railML files, or as a direct inter-process communication via TCP/IP.

Licensing and pricing

The usage of railML is possible at no charge as long as users register at railML.org, do not redistribute or modify the code, and do not use railML commercially. It is a free data exchange format but not open due to being licensed under a heavily restricted and non-permissive Creative Commons license.

Versions 0.x and 1.x were licensed under a proprietary license, where version 0.x was intended only for internal use and shared within the consortium.

Version 2.0 to 2.2 used to be licensed with the Creative Commons license CC-BY-NC-SA until June 2013. Since July 2013 all versions from 2.0 onward were offered parallelly either with a commercial usable CC-BY-ND (V 3) license or with a restricted CC-BY-NC-ND (V 3) license. The organization behind railML claims that the restrictions preventing redistribution and modifications are for quality control purposes, the means of which is requiring application developers to purchase a certification.

Version 3.x is licensed under the same Creative Commons conditions, but in CC version 4.0. With this railML.org adapts the enhancements made by CC and garanties schema user the same usage rights as in previous years and railML versions.

The Logo and the word railML are a registered as trademarks by the railML consortium at the EUIPO.

Legal entity

Legal entity for the so-called railML consortium is the railML.org e.V. a registered non-profit association by German law (registration number VR 5750 at the local court in Dresden/Germany) since April 23, 2012.

railML schemes

railML is based on XML and sub-areas use other existing XML-schemes such as MathML and GML. It is composed of sub-schemes. Through version 2.4, three sub-schemes are in productive use:

• timetable for the description of timetables,
• infrastructure for the (priority topological) description of tracks and signalling equipment and
• rolling stock for the description of vehicles.

Since railML version 3.1 an additional sub-scheme was introduced due to the demand of the community:

• interlocking for the description of signaling routes

Additional sub-schemes are station facilities (ticket machines, waiting rooms, vending machines, etc.) or crew rostering (shift planning/rosters and working time management for conductors, etc.) are currently on hold, as there is no demand from the users.

Timetable

This sub-schema serves the exchange of detailed timetables. Particularly, the schema is designed for the following information:

• Train running times (arrivals, departures and passing times)
• Operating Periods: the days on which a train is operated
• Train Parts: scheduling and routing information for through coaches in trains, e.g. the Orient Express on the traject from Budapest to Beograd on Mondays.
• Trains: a collection of train parts, adding up to the colloquial perspective, e.g. the Orient Express.
• Rostering: Circulation plans for rolling stock, linked with Train Parts.

Infrastructure

The focus of this sub-schema is the infrastructure of railway networks. Important aspects are:

• Network topology
• Coordinates
• Geometry: track geometry (gradient, curve radius)
• Railway infrastructure elements: inventory like balises and signals
• Further located elements: abstract things that cannot be touched but located, like speed limits and track condition

Rolling stock

While the Infrastructure sub-schema is focused on immobile assets, Rolling stock describes assets circulating in the network.

• Vehicles
• Formations: the combination of vehicles as a train
• Tractive effort of locomotives and motor units

Interlocking

• Signal aspects derived from train routes through stations

Code example

Example for a time table formulated in railML

<?xml version="1.0" encoding="UTF-8"?>
<railml xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance" xsi:noNamespaceSchemaLocation="timetable.xsd">
	<timetable version="1.1">
		<train trainID="RX 100.2" type="planned" source="opentrack">
			<timetableentries>
				<entry posID="ZU" departure="06:08:00" type="begin"/>
				<entry posID="ZWI" departure="06:10:30" type="pass"/>
				<entry posID="ZOER" arrival="06:16:00" departure="06:17:00" minStopTime="9" type="stop"/>
				<entry posID="WS" departure="06:21:00" type="pass"/>
				<entry posID="DUE" departure="06:23:00" type="pass"/>
				<entry posID="SCW" departure="06:27:00" type="pass"/>
				<entry posID="NAE" departure="06:29:00" type="pass"/>
				<entry posID="UST" arrival="06:34:30" type="stop"/>
			</timetableentries>
		</train>
	</timetable>
</railml>

Line 3 expresses that the employed railML-version is 1.1.

Line 4 bears the train code.

Lines 5 and 15 frame the itinerary with, in this case, 8 itinerary entries.

The itinerary entries in line 6 to 14 have arguments like position ID (e.g. a station), time of departure or arrival, and in line 9 an obligation to stop.

Versions

Version	Release date	Supported until	Licence	Comment
Old version, no longer maintained: 0.x	2002–2005	December 2005	No (internal usage only)	beta version timetable
Old version, no longer maintained: 1.0	December 2005	June 2013	proprietary	First practical experience
Old version, no longer maintained: 1.1	November 2007	June 2013	proprietary
Old version, no longer maintained: 2.0	November 2009	March 2017	restricted CC-BY-ND 2.0
Old version, no longer maintained: 2.1	July 2011	March 2017	restricted CC-BY-ND 2.0	Downwardly compatible with V2.0
Old version, no longer maintained: 2.2	June 11, 2013	June 30, 2021	restricted CC-BY-NC-ND 3.0	Downwardly compatible with V2.1-V2.0
Old version, yet still maintained: 2.3	March 10, 2016	June 30, 2024	restricted CC-BY-NC-ND 3.0	Predominant downward compatible with V2.2-V2.0
Old version, yet still maintained: 2.4	October 7, 2018	November, 2026	restricted CC-BY-NC-ND 3.0	Predominant downward compatible with V2.3-V2.0
Current stable version: 2.5	September 1, 2021	August, 2028	restricted CC-BY-NC-ND 3.0	Predominant downward compatible with V2.4-V2.0 Also adopted as an ISO 4398:2022 standard
Old version, no longer maintained: 3.0	October 31, 2017	February 19, 2019	No (internal usage only)	based on UIC's RailTopoModel V1.1
Old version, yet still maintained: 3.1	February 19, 2019	January, 2026	restricted CC-BY-NC-ND 4.0	based on RailTopoModel V1.2 Infrastructure and Signalling data only
Old version, yet still maintained: 3.2	April 26, 2022	March, 2029	restricted CC-BY-NC-ND 4.0	based on RailTopoModel V1.4 added support of Timetable and Rolling stock data
Current stable version: 3.3	November 5, 2024	October, 2031	restricted CC-BY-NC-ND 4.0	based on RailTopoModel V1.5
Future release: 3.4	June, 2026		restricted CC-BY-NC-ND	based on RailTopoModel
Legend: Old version, not maintained Old version, still maintained Latest version Latest preview version Future release

Usage of railML data

At the beginning the most employed usage of railML data was timetable data for passenger information, duty planning for conductors and drivers and timetable simulation, following the usage of railML data for interlocking planning and infrastructure like network statements of IM's.

Computer programmes

Applications using railML version 2.x include a lot of timetable related programmes like OpenTrack (interactive railway simulator), FBS (planning software for railway operation), Viriato (scheduling system) and OpenTimeTable (real time analysis of network operation data). Applications using railML version 3.x include additionally BIM related infrastructure planning software like VIS All 3D or railway survey systems like GPSinfradat.

A complete list of programmes with (certified) interfaces is available at railML's website of compatible applications.

railVIVID

railVIVID is a free tool provided by UIC and railML.org to validate railML files of version 2.x or higher and to show the content of railML files in some special views. The intention of the tool is to allow less technical users access to data described in railML. Therefore, some sights of railway data can be shown, copied and printed with railVIVID:

• Graphic viewer for Timetable data
• Tabular viewer for Timetable data with spreadsheet export
• Rolling Stock data viewer
• Topologic viewer for Infrastructure data
• Geographic viewer for Infrastructure data
• Schema validator for railML

railVIVID is available via railML's website under terms similar to those of the railML schema. There are binary versions for Microsoft Windows and Java, also the source code was published in Autumn 2015 under the EUPL licence.

railML.org initiative

The development of railML is driven by the railML.org—Initiative, a development partnership of independent companies and organizations and European railways. The participation on the development and semi-annual conferences to exchange experience and discuss basics is open. The continuous development work is mainly internet-based (German and English forums). The organisation of the discussions is managed by so-called railML Coordinators. The railML.org Consortium membership is mandatory for the download and usage of railML schemes. Obtaining a commercial certification is required before any commercial or productive use of software interfaces for the format.

Members

Members of railML.org are currently:

• Railways like Austrian Federal Railways, BLS, French Railways, German State Railway, Infrabel, Norwegian Rail Infrastructure Manager, Swiss Federal Railways, ...
• Software manufacturers like Hacon (Hanover/Germany), iRFP (Dresden/Germany), PTV (Karlsruhe/Germany), SMA (Zurich/Switzerland), Trapeze Group (Hamburg/Germany), Siemens (Brunswick/Erlangen/Germany), Thales (Berlin & Ditzingen/Germany), ...
• Authorities like Bavarian Passenger Transport Authority (Munich/Germany), Federal Ministry of Transport and Digital Infrastructure (Berlin/Germany), High Speed Two (London/Great Britain), Jernbanedirektoratet (Oslo/Norway), ...
• Universities and Research institutes like Czech Technical University Prague, Dresden University, DLR, ETH Zurich, University of Birmingham, ...

A complete and updated list is published at the website of railML.org community.

Cooperations

railML.org works in the ERIM (abbreviation for European Rail Infrastructure Masterplan) project of the International Union of Railways (UIC) for the development of RailTopoModel as a common data model in the railway sector. Also railML.org cooperates with Eurocontrol and European Union Agency for Railways.

External links

• railML Homepage
• railML discussion board