Hunter 30-2
Development | |
---|---|
Location | United States |
Year | 1988 |
Builder(s) | Hunter Marine |
Name | Hunter 30-2 |
Boat | |
Displacement | 10,500 lb (4,763 kg) |
Draft | 4.25 ft (1.30 m) |
Hull | |
Type | Monohull |
Construction | Fiberglass |
LOA | 30.08 ft (9.17 m) |
LWL | 25.83 ft (7.87 m) |
Beam | 11.00 ft (3.35 m) |
Engine type | Inboard engine |
Hull appendages | |
Keel/board type | Wing keel |
Ballast | 3,800 lb (1,724 kg) |
Rudder(s) | internally-mounted spade-type rudder |
Rig | |
Rig type | Bermuda rig |
I foretriangle height | 36.83 ft (11.23 m) |
J foretriangle base | 9.75 ft (2.97 m) |
P mainsail luff | 40.60 ft (12.37 m) |
E mainsail foot | 12.50 ft (3.81 m) |
Sails | |
Sailplan | Fractional rigged sloop |
Mainsail area | 253.75 sq ft (23.574 m2) |
Jib/genoa area | 179.55 sq ft (16.681 m2) |
Total sail area | 433.30 sq ft (40.255 m2) |
Racing | |
PHRF | 183 (average) |
The Hunter 30-2 is an American sailboat, that was built by Hunter Marine in the United States between 1988 and 1992.[1][2]
The boat was sold under the name Hunter 30, but because the company has sold four designs under that name, this design has become known as the 30-2 to differentiate it.[3]
Production
[edit]The design was built by Hunter Marine in the United States between 1988 and 1992.[1][2][4]
Design
[edit]The Hunter 30-2 is a small recreational keelboat, built predominantly of fiberglass. It has a fractional sloop rig, a slightly raked stem, a walk-through reverse transom, an internally-mounted spade-type rudder controlled by a wheel and a fixed wing keel. It displaces 10,500 lb (4,763 kg) and carries 3,800 lb (1,724 kg) of ballast.[1][3][2]
The boat has a draft of 4.25 ft (1.30 m) with the standard wing keel.[1][2]
The boat is fitted with an inboard engine. The fuel tank holds 18 U.S. gallons (68 L; 15 imp gal) and the fresh water tank has a capacity of 37 U.S. gallons (140 L; 31 imp gal).[1][2]
The design was factory delivered with a shower and hot water tank, double sinks, oven and stove top, and an icebox, as standard equipment.[3]
The design has a PHRF racing average handicap of 183 with a high of 191 and low of 174. It has a hull speed of 6.81 kn (12.61 km/h).[2][5]
See also
[edit]Related development
Similar sailboats
- Alberg 30
- Alberg Odyssey 30
- Aloha 30
- Annie 30
- Bahama 30
- Bristol 29.9
- C&C 1/2 Ton
- C&C 30
- C&C 30 Redwing
- Catalina 30
- Catalina 309
- CS 30
- Grampian 30
- Hunter 29.5
- Hunter 306
- J/30
- Kirby 30
- Leigh 30
- Mirage 30
- Mirage 30 SX
- Nonsuch 30
- Pearson 303
- S2 9.2
- Santana 30/30
- Seafarer 30
References
[edit]- ^ a b c d e McArthur, Bruce (2020). "Hunter 30-2 sailboat specifications and details". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 30 July 2020.
- ^ a b c d e f Sea Time Tech, LLC (2022). "Hunter 30-2". sailboat.guide. Archived from the original on 26 March 2022. Retrieved 26 March 2022.
- ^ a b c Hunter Marine (1988). "Hunter 30" (PDF). marlow-hunter.com. Archived (PDF) from the original on 4 July 2018. Retrieved 4 July 2018.
- ^ McArthur, Bruce (2022). "Hunter Marine". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 26 March 2022.
- ^ InterVisionSoft LLC (2018). "Sailboat Specifications for Hunter 30-2". Sailing Joy. Archived from the original on 4 July 2018. Retrieved 4 July 2018.