Jump to content

Yttrium barium copper oxide

From Wikipedia, the free encyclopedia
(Redirected from YBa2Cu3O7)
Yttrium barium copper oxide
Yttrium barium copper oxide structure
Yttrium barium copper oxide crystal
Names
IUPAC name
barium copper yttrium oxide
Other names
YBCO, Y123, yttrium barium cuprate
Identifiers
ChemSpider
ECHA InfoCard 100.121.379 Edit this at Wikidata
EC Number
  • 619-720-7
Properties
YBa2Cu3O7
Molar mass 666.19 g/mol
Appearance Black solid
Density 6.4 g/cm3[1][2]
Melting point >1000 °C
Insoluble
Structure
Based on the perovskite structure.
Orthorhombic
Hazards
GHS labelling:
GHS07: Exclamation mark
Warning
H302, H315, H319, H335
P261, P264, P270, P271, P280, P301+P312, P302+P352, P304+P340, P305+P351+P338, P312, P321, P330, P332+P313, P337+P313, P362, P403+P233, P405, P501
Related compounds
Cuprate superconductors
Related compounds
 Yttrium(III) oxide
Barium oxide
Copper(II) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Yttrium barium copper oxide (YBCO) is a family of crystalline chemical compounds that display high-temperature superconductivity; it includes the first material ever discovered to become superconducting above the boiling point of liquid nitrogen [77 K (−196.2 °C; −321.1 °F)] at about 93 K (−180.2 °C; −292.3 °F).[3]

Many YBCO compounds have the general formula YBa2Cu3O7−x (also known as Y123), although materials with other Y:Ba:Cu ratios exist, such as YBa2Cu4Oy (Y124) or Y2Ba4Cu7Oy (Y247). At present, there is no singularly recognised theory for high-temperature superconductivity.

It is part of the more general group of rare-earth barium copper oxides (ReBCO) in which, instead of yttrium, other rare earths are present.

History

[edit]

In April 1986, Georg Bednorz and Karl Müller, working at IBM in Zurich, discovered that certain semiconducting oxides became superconducting at relatively high temperature, in particular, a lanthanum barium copper oxide becomes superconducting at 35 K. This oxide was an oxygen-deficient perovskite-related material that proved promising and stimulated the search for related compounds with higher superconducting transition temperatures. In 1987, Bednorz and Müller were jointly awarded the Nobel Prize in Physics for this work.

Following Bednorz and Müller's discovery, a team led by Paul Ching Wu Chu at the University of Alabama in Huntsville and University of Houston discovered that YBCO has a superconducting transition critical temperature (Tc) of 93 K.[3] The first samples were Y1.2Ba0.8CuO4, but this was an average composition for two phases, a black and a green one. Workers at Bell Laboratories identified the black phase as the superconductor, determined its composition YBa2Cu3O7−δ and synthesized it in single phase[4]

YBCO was the first material found to become superconducting above 77 K, the boiling point of liquid nitrogen, whereas the majority of other superconductors require more expensive cryogens. Nonetheless, YBCO and its many related materials have yet to displace superconductors requiring liquid helium for cooling.

Synthesis

[edit]

Relatively pure YBCO was first synthesized by heating a mixture of the metal carbonates at temperatures between 1000 and 1300 K.[5][6]

4 BaCO3 + Y2(CO3)3 + 6 CuCO3 + (1⁄2−x) O2 → 2 YBa2Cu3O7−x + 13 CO2

Modern syntheses of YBCO use the corresponding oxides and nitrates.[6]

The superconducting properties of YBa2Cu3O7−x are sensitive to the value of x, its oxygen content. Only those materials with 0 ≤ x ≤ 0.65 are superconducting below Tc, and when x ~ 0.07, the material superconducts at the highest temperature of 95 K,[6] or in highest magnetic fields: 120 T for B perpendicular and 250 T for B parallel to the CuO2 planes.[7]

In addition to being sensitive to the stoichiometry of oxygen, the properties of YBCO are influenced by the crystallization methods used. Care must be taken to sinter YBCO. YBCO is a crystalline material, and the best superconductive properties are obtained when crystal grain boundaries are aligned by careful control of annealing and quenching temperature rates.

Numerous other methods to synthesize YBCO have developed since its discovery by Wu and his co-workers, such as chemical vapor deposition (CVD),[5][6] sol-gel,[8] and aerosol[9] methods. These alternative methods, however, still require careful sintering to produce a quality product.

However, new possibilities have been opened since the discovery that trifluoroacetic acid (TFA), a source of fluorine, prevents the formation of the undesired barium carbonate (BaCO3). Routes such as CSD (chemical solution deposition) have opened a wide range of possibilities, particularly in the preparation of long YBCO tapes.[10] This route lowers the temperature necessary to get the correct phase to around 700 °C (973 K; 1,292 °F). This, and the lack of dependence on vacuum, makes this method a very promising way to get scalable YBCO tapes.

Structure

[edit]
Part of the lattice structure of yttrium barium copper oxide

YBCO crystallizes in a defect perovskite structure consisting of layers. The boundary of each layer is defined by planes of square planar CuO4 units sharing 4 vertices. The planes can sometimes be slightly puckered.[5] Perpendicular to these CuO4 planes are CuO2 ribbons sharing 2 vertices. The yttrium atoms are found between the CuO4 planes, while the barium atoms are found between the CuO2 ribbons and the CuO4 planes. This structural feature is illustrated in the figure to the right.

Coordination geometry of metal centres in YBCO[11][6]
cubic {YO8} {BaO10} square planar {CuO4} square pyramidal {CuO5} YBa2Cu3O7- unit cell
puckered Cu plane Cu ribbons
Like many type-II superconductors, YBCO can exhibit flux pinning: lines of magnetic flux may be pinned in place in a crystal, with a force required to move a piece from a particular magnetic field configuration. A piece of YBCO placed above a magnetic track can thus levitate at a fixed height.[5]

Although YBa2Cu3O7 is a well-defined chemical compound with a specific structure and stoichiometry, materials with fewer than seven oxygen atoms per formula unit are non-stoichiometric compounds. The structure of these materials depends on the oxygen content. This non-stoichiometry is denoted by the x in the chemical formula YBa2Cu3O7−x. When x = 1, the O(1) sites in the Cu(1) layer (as labelled in the unit cell) are vacant and the structure is tetragonal. The tetragonal form of YBCO is insulating and does not superconduct. Increasing the oxygen content slightly causes more of the O(1) sites to become occupied. For x < 0.65, Cu-O chains along the b axis of the crystal are formed. Elongation of the b axis changes the structure to orthorhombic, with lattice parameters of a = 3.82, b = 3.89, and c = 11.68 Å.[12] Optimum superconducting properties occur when x ~ 0.07, i.e., almost all of the O(1) sites are occupied, with few vacancies.

In experiments where other elements are substituted on the Cu and Ba[why?] sites, evidence has shown that conduction occurs in the Cu(2)O planes while the Cu(1)O(1) chains act as charge reservoirs, which provide carriers to the CuO planes. However, this model fails to address superconductivity in the homologue Pr123 (praseodymium instead of yttrium).[13] This (conduction in the copper planes) confines conductivity to the a-b planes and a large anisotropy in transport properties is observed. Along the c axis, normal conductivity is 10 times smaller than in the a-b plane. For other cuprates in the same general class, the anisotropy is even greater and inter-plane transport is highly restricted.

Furthermore, the superconducting length scales show similar anisotropy, in both penetration depth (λab ≈ 150 nm, λc ≈ 800 nm) and coherence length, (ξab ≈ 2 nm, ξc ≈ 0.4 nm). Although the coherence length in the a-b plane is 5 times greater than that along the c axis it is quite small compared to classic superconductors such as niobium (where ξ ≈ 40 nm). This modest coherence length means that the superconducting state is more susceptible to local disruptions from interfaces or defects on the order of a single unit cell, such as the boundary between twinned crystal domains. This sensitivity to small defects complicates fabricating devices with YBCO, and the material is also sensitive to degradation from humidity.

Proposed applications

[edit]
Critical current (KA/cm2) vs absolute temperature (K), at different intensity of magnetic field (T) in YBCO prepared by infiltration-growth.[14]

Many possible applications of this and related high temperature superconducting materials have been discussed. For example, superconducting materials are finding use as magnets in magnetic resonance imaging, magnetic levitation, and Josephson junctions. (The most used material for power cables and magnets is BSCCO.)[citation needed]

YBCO has yet to be used in many applications involving superconductors for two primary reasons:

  • First, although single crystals of YBCO have a very high critical current density, polycrystals have a very low critical current density: only a small current can be passed while maintaining superconductivity. This problem is due to crystal grain boundaries in the material. When the grain boundary angle is greater than about 5°, the supercurrent cannot cross the boundary. The grain boundary problem can be controlled to some extent by preparing thin films via CVD or by texturing the material to align the grain boundaries.[citation needed]
  • A second problem limiting the use of this material in technological applications is associated with processing of the material. Oxide materials such as this are brittle, and forming them into superconducting wires by any conventional process does not produce a useful superconductor. (Unlike BSCCO, the powder-in-tube process does not give good results with YBCO.)[citation needed]

The most promising method developed to utilize this material involves deposition of YBCO on flexible metal tapes coated with buffering metal oxides. This is known as coated conductor. Texture (crystal plane alignment) can be introduced into the metal tape (the RABiTS process) or a textured ceramic buffer layer can be deposited, with the aid of an ion beam, on an untextured alloy substrate (the IBAD process). Subsequent oxide layers prevent diffusion of the metal from the tape into the superconductor while transferring the template for texturing the superconducting layer. Novel variants on CVD, PVD, and solution deposition techniques are used to produce long lengths of the final YBCO layer at high rates. Companies pursuing these processes include American Superconductor, Superpower (a division of Furukawa Electric), Sumitomo, Fujikura, Nexans Superconductors, Commonwealth Fusion Systems, and European Advanced Superconductors. A much larger number of research institutes have also produced YBCO tape by these methods.[citation needed]

The superconducting tape may be the key to a tokamak fusion reactor design that can achieve breakeven energy production.[15] YBCO is often categorized as a rare-earth barium copper oxide (REBCO).[16]

Surface modification

[edit]

Surface modification of materials has often led to new and improved properties. Corrosion inhibition, polymer adhesion and nucleation, preparation of organic superconductor/insulator/high-Tc superconductor trilayer structures, and the fabrication of metal/insulator/superconductor tunnel junctions have been developed using surface-modified YBCO.[17]

These molecular layered materials are synthesized using cyclic voltammetry. Thus far, YBCO layered with alkylamines, arylamines, and thiols have been produced with varying stability of the molecular layer. It has been proposed that amines act as Lewis bases and bind to Lewis acidic Cu surface sites in YBa2Cu3O7 to form stable coordination bonds.

Mass production

[edit]
SuperOx was able to produce over 186 miles of YBCO in 9 months for use in a fusion magnet.

In 1987, shortly after it was discovered, physicist and science author Paul Grant published in the U.K. Journal New Scientist a straightforward guide for synthesizing YBCO superconductors using widely-available equipment.[18] Thanks in part to this article and similar publications at the time, YBCO has become a popular high-temperature superconductor for use by hobbyists and in education, as the magnetic levitation effect can be easily demonstrated using liquid nitrogen as coolant.

In 2021, SuperOx, a Russian and Japanese company, developed a new manufacturing process for making YBCO wire for fusion reactors. This new wire was shown to conduct between 700 and 2000 Amps per square millimeter. The company was able to produce 186 miles of wire in 9 months, between 2019 and 2021, dramatically improving the production capacity. The company used a plasma-laser deposition process, on a electropolished substrate to make 12-mm width tape and then slit it into 3-mm tape.[19]

References

[edit]
  1. ^ Knizhnik, A (2003). "Interrelation of preparation conditions, morphology, chemical reactivity and homogeneity of ceramic YBCO". Physica C: Superconductivity. 400 (1–2): 25. Bibcode:2003PhyC..400...25K. doi:10.1016/S0921-4534(03)01311-X.
  2. ^ Grekhov, I (1999). "Growth mode study of ultrathin HTSC YBCO films on YBaCuNbO buffer". Physica C: Superconductivity. 324 (1): 39. Bibcode:1999PhyC..324...39G. doi:10.1016/S0921-4534(99)00423-2.
  3. ^ a b Wu, M. K.; Ashburn, J. R.; Torng, C. J.; Hor, P. H.; Meng, R. L.; Gao, L; Huang, Z. J.; Wang, Y. Q.; Chu, C. W. (1987). "Superconductivity at 93 K in a New Mixed-Phase Y-Ba-Cu-O Compound System at Ambient Pressure". Physical Review Letters. 58 (9): 908–910. Bibcode:1987PhRvL..58..908W. doi:10.1103/PhysRevLett.58.908. PMID 10035069.
  4. ^ R. J. Cava, B. Batlogg, R. B. van Dover, D. W. Murphy, S. Sunshine, T. Siegrist, J. P. Remeika, E. A. Rietman, S. Zahurak, and G. P. Espinosa, Physical Review Letters 58, 1676 (1987), subm. March 5, 1987, "Bulk superconductivity at 91 K in single-phase oxygen-deficient perovskite Ba2YCu3O9−δ" / and US patent 6,6635,603 (B. J. Batlogg, R. J. Cava, R. B. van Dover ), Macilwain, C. Bell Labs win superconductivity patent. Nature 403, 121–122 (2000). https://doi.org/10.1038/35003008 |
  5. ^ a b c d Housecroft, C. E.; Sharpe, A. G. (2004). Inorganic Chemistry (2nd ed.). Prentice Hall. ISBN 978-0-13-039913-7.
  6. ^ a b c d e Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  7. ^ Sekitani, T.; Miura, N.; Ikeda, S.; Matsuda, Y.H.; Shiohara, Y. (2004). "Upper critical field for optimally-doped YBa2Cu3O7−δ". Physica B: Condensed Matter. 346–347: 319–324. Bibcode:2004PhyB..346..319S. doi:10.1016/j.physb.2004.01.098.
  8. ^ Sun, Yang-Kook & Oh, In-Hwan (1996). "Preparation of Ultrafine YBa2Cu3O7−x Superconductor Powders by the Poly(vinyl alcohol)-Assisted Sol−Gel Method". Ind. Eng. Chem. Res. 35 (11): 4296. doi:10.1021/ie950527y.
  9. ^ Zhou, Derong (1991). "Yttrium Barium Copper Oxide Superconducting Powder Generation by An Aerosol Process". University of Cincinnati: 28. Bibcode:1991PhDT........28Z. {{cite journal}}: Cite journal requires |journal= (help)
  10. ^ Casta o, O; Cavallaro, A; Palau, A; Gonz Lez, J C; Rossell, M; Puig, T; Sandiumenge, F; Mestres, N; Pi Ol, S; Pomar, A; Obradors, X (2003). "High quality YBa2Cu3O{7–x} thin films grown by trifluoroacetates metal-organic deposition". Supercond. Sci. Technol. 16 (1): 45–53. Bibcode:2003SuScT..16...45C. doi:10.1088/0953-2048/16/1/309. S2CID 250765145.
  11. ^ Williams, A.; Kwei, G. H.; Von Dreele, R. B.; Raistrick, I. D.; Bish, D. L. (1988). "Joint x-ray and neutron refinement of the structure of superconducting YBa2Cu3O7−x: Precision structure, anisotropic thermal parameters, strain, and cation disorder". Phys. Rev. B. 37 (13): 7960–7962. doi:10.1103/PhysRevB.37.7960. PMID 9944122.
  12. ^ Mook, H. A. (31 May 1993). "Polarized Neutron Determination of the Magnetic Excitations in YBa2Cu3O7". Physical Review Letters. 70 (22): 3490–3493. doi:10.1103/PhysRevLett.70.3490. PMID 10053882.
  13. ^ Oka, K (1998). "Crystal growth of superconductive PrBa2Cu3O7−y". Physica C. 300 (3–4): 200. Bibcode:1998PhyC..300..200O. doi:10.1016/S0921-4534(98)00130-0.
  14. ^ Koblischka-Veneva, Anjela; Koblischka, Michael R.; Berger, Kévin; Nouailhetas, Quentin; Douine, Bruno; Muralidhar, Miryala; Murakami, Masato (August 2019). "Comparison of Temperature and Field Dependencies of the Critical Current Densities of Bulk YBCO, MgB₂, and Iron-Based Superconductors". IEEE Transactions on Applied Superconductivity. 29 (5): 1–5. Bibcode:2019ITAS...2900932K. doi:10.1109/TASC.2019.2900932. ISSN 1558-2515. S2CID 94789535.
  15. ^ A small, modular, efficient fusion plant | MIT News. Newsoffice.mit.edu. Retrieved on 2015-12-09.
  16. ^ MIT takes a page from Tony Stark, edges closer to an ARC fusion reactor
  17. ^ Xu, F.; et al. (1998). "Surface Coordination Chemistry of YBa2Cu3O7−δ". Langmuir. 14 (22): 6505. doi:10.1021/la980143n.
  18. ^ Grant, Paul (30 July 1987). "Do-it-yourself Superconductors". New Scientist. 115 (1571). Reed Business Information: 36. Retrieved 12 January 2019.
  19. ^ Molodyk, A.; et al. (2021). "Development and large volume production of extremely high current density YBa2Cu3O7 superconducting wires for fusion". Scientific Reports. 11 (1) 2084: 2084. doi:10.1038/s41598-021-81559-z. PMC 7822827. PMID 33483553.
[edit]
Wikimedia Commons has media related to Yttrium barium copper oxide.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Yttrium_barium_copper_oxide&oldid=1250830597"