Wikipedia:WikiProject Metalworking

This WikiProject is believed to be semi-active.

Although activity is slower than it once was, anyone is welcome to participate in the project.

Remove the |Semi-active parameter from this template if activity resumes or if this tag was changed in error. If almost no activity occurs in this WikiProject, consider replacing this tag with {{WikiProject status|Inactive}}.

Shortcuts

Welcome to the Metalworking WikiProject! We're a WikiProject dedicated to improving the coverage of Metalworking on the English Wikipedia, including materials, processes, techniques, equipment, and more. Feel free to contribute to this page, or add yourself to the list of contributors below. If you have any questions or suggestions about the project, make sure to see the Talk page.

Please make sure to follow all Wikipedia policies when contributing to the project, including WP:MOS, WP:POV, and WP:SOURCE. Thanks so much for helping out!

What we're about

Scope

Any articles in the Category:Metalworking and its sub-categories fall within our scope, as well as any articles that pertain in a direct way to the subject of Metalworking. We also work closely with similar projects whose scopes frequently coincide with ours.

Goals

To improve Wikipedia's coverage of metalworking by creating, expanding, and maintaining such articles.
To provide guidelines and recommendations for articles within our scope.
To serve as the central point of discussion for issues related to metalworking in Wikipedia.

How you can help

Be bold and contribute! Improve any articles you come across, look for articles to improve from our Cleanup listing, ask any of our regular contributors, or check the Work section below for specific projects.

Work

Metalworking articles by quality and importance
Quality	Importance
Quality	Top	High	Mid	Low	NA	???	Total
FA	3		1	4			8
GA	1	3	2	9			15
B	4	14	32	65		56	171
C	38	58	170	277		106	649
Start	3	31	110	518		160	822
Stub		1	19	329		80	429
List		1	6	10		1	18
Project					13		13
Template					24		24
NA	2		5	33	344		384
Assessed	51	108	345	1,245	381	403	2,533
Total	51	108	345	1,245	381	403	2,533
WikiWork factors (?)		ω = 9,823			Ω = 4.69

There's always work of some sort to be done; if you can't find any particular projects here to interest you, peruse pages within the Metalworking category to look for improvements you can make, or check out the Cleanup listing for articles that need improvement.

Feel free to add any tasks here that you think deserve the attention of the whole project; please sign using ~~~~ and make sure to strikethrough or remove items as they are completed.

Keep in mind that if a machine exists for only one purpose or process, it's usually better to devote a section of the article for the process to the machine, rather than give the machine a separate article. If a complete, sourced article can be written about the machine, then by all means do so; this usually is not the case.

Vital articles

These are articles vital to the subject of metalworking; it would bolster the quality of Metalworking on Wikipedia significantly to bring them up to Featured article status.

References and sources

If you take a look at the categorical Cleanup listing, you'll see that the two biggest categories by a huge margin are "Articles needing additional references" and "Articles with unsourced statements." I feel like most of the content across these articles is fairly reliable, so adding references and verifying shouldn't be a particularly arduous task. If anyone has access to technical manuals or other kinds of reliable sources, it would be a huge benefit to the project, disproportionate to the effort required. I've begun working on this, I've got access to one of the best libraries in the southeastern US, but I lack the appropriate expertise to efficiently find the right texts. --Kierkkadon^{talk/contribs} 04:57, 23 January 2013 (UTC)[reply]

I want to make it clear that I'm not impugning the value of unsourced contributions; on the contrary, I think very highly of much of the content covered by this project, unsourced or not. I'm not a deletionist, neither do I think that content should just come out of left field; but I do know that in metalworking in particular a lot of important information is just held as expert knowledge that's difficult to attach to a source. Add to that the tendency for technical manuals to be really dense and ... well, technical, and it's obvious why metalworking has so much content with so little referencing. This may not be true of all subjects, but metalworking is an area where I think we are better off having experts add their knowledge and then others follow along later verifying and referencing. For what it's worth. --Kierkkadon^{talk/contribs} 05:13, 31 January 2013 (UTC)[reply]

I agree. And I feel that metalworking isn't alone regarding this theme—it holds true across various content areas in Wikipedia. It holds most strongly in industrial, commercial, and applied science areas, even more than in areas of pure science, academe, pop culture, and personal hobbies. So I'm glad to be a part of building areas like metalworking. It takes time, but it's a worthwhile pursuit... — ¾-10 01:30, 1 February 2013 (UTC)[reply]

Request for reassessment

I just recently did a lot of rewrites and content-adding to Fixture (tool). It was listed as stub-class, now I think it deserves a better qualification but I don't feel comfortable basically grading myself on my own work. --Kierkkadon^{talk/contribs} 23:02, 26 January 2013 (UTC)[reply]

I've basically done exactly the same thing to Centerless grinding. I'd love for somebody to reassess it; I don't quite think it qualifies as Start class anymore. --Kierkkadon^{talk/contribs} 17:33, 31 January 2013 (UTC)[reply]

Requested articles

The following three either need to be outline-style pages, containing lists of pages that fall within their purvue, or dedicated articles themselves; these, from what I understand, are the three major categories into which all modern metalworking processes fall. They may exist as different names, but I think it would greatly improve the cohesion of Metalworking as a subject on Wikipedia if they were to be standardized. —Kierkkadon^{talk/contribs} 16:33, 6 February 2013 (UTC)[reply]
- ~~Forming (metalworking)~~
  - Done, but it still needs a fair amount of expansion and harmonization with the rest of Metalworking. —Kierkkadon^{talk/contribs} 18:08, 6 February 2013 (UTC)[reply]
- Cutting (metalworking)
  - Instead of starting an article I expanded this one - cutting, this is my first non-trivial edit, feedback appreciated. Tealeafe 02 August 2014
- Joining (metalworking)
Stretching (metalworking) Wizard191 (talk) 18:29, 9 May 2009 (UTC)[reply]
Transfer stamping / transfer die Wizard191 (talk) 18:29, 9 May 2009 (UTC)[reply]
Setup (manufacturing) Wizard191 (talk) 18:29, 9 May 2009 (UTC)[reply]
~~Mill finishes or mill finish Wizard191 (talk) 21:21, 15 June 2009 (UTC)~~[reply]
- Done. --Kierkkadon^{talk/contribs} 14:41, 30 January 2013 (UTC)[reply]
Soaking pit Wizard191 (talk) 01:37, 16 July 2009 (UTC)[reply]
Re-heat furnace Walking beam and pusher types. AutoElectEngr 6 February 2022
Stripper pin Wizard191 (talk) 00:51, 21 July 2009 (UTC)[reply]
Side action / side pull Wizard191 (talk) 00:51, 21 July 2009 (UTC)[reply]
Through hardening (currently a redirect) Wizard191 (talk) 00:35, 22 July 2009 (UTC)[reply]
Core registration or registration (casting) Wizard191 (talk) 22:06, 2 August 2009 (UTC)[reply]
Shakeout (casting) Wizard191 (talk) 00:35, 5 August 2009 (UTC)[reply]
~~Chemical milling Wizard191 (talk) 22:07, 28 August 2009 (UTC)~~[reply]
- ~~Done, but it needs to be merged with Industrial etching. —Kierkkadon^{talk/contribs} 21:30, 10 February 2013 (UTC)~~[reply]
  - Also done, but the merge has been disputed. Input would be quite welcome, as it doesn't look like this dispute is going anywhere. Talk:Industrial etching#Merge with Chemical milling —Kierkkadon^{talk/contribs} 19:26, 13 February 2013 (UTC)[reply]
~~Zinc plating Wizard191 (talk) 17:29, 30 August 2009 (UTC)~~[reply]
Straightening Wizard191 (talk) 18:32, 3 September 2009 (UTC)[reply]
- For some reason this linked to an article on a hip hop group. Have removed link. CSK45Kays (talk) 15:51, 14 February 2022 (UTC)[reply]
ID grinding Wizard191 (talk) 20:07, 14 September 2009 (UTC)[reply]
- Redirected to Cylindrical grinder#Inside diameter grinding --Kharon (talk) 13:45, 1 June 2017 (UTC)[reply]
Flame hardening Wizard191 (talk) 13:37, 1 October 2009 (UTC)[reply]
Mold wash & refractory wash Wizard191 (talk) 21:32, 13 October 2009 (UTC)[reply]
Chill testing Wizard191 (talk) 00:54, 19 November 2009 (UTC)[reply]
- A possible ref
Tooling (currently a redirect) Wizard191 (talk) 21:27, 7 January 2010 (UTC)[reply]
- I thought tooling was industry jargon for tool supply and management, which Tool management covers. What would a separate Tooling article cover? --Kierkkadon^{talk/contribs} 14:10, 30 January 2013 (UTC)[reply]
  - The term "tooling" traditionally to machinists, and today to machinists, has been a mass noun referring en masse to a certain range of kinds of tools—all of the cutting tools, tool holders, machine tool accessories, and tool and die–type equipment, such as fixtures and dies, used along with a machine tool itself to accomplish making a part. The machine tool itself is mentally separate, and the hand tools in one's toolbox, like a screwdriver, are not included either—this notion of which tools are not mentally classed as "tooling" is the part that non-machinists might find non-intuitive. The term "tool management" was not commonly used decades ago, but the concept would have been readily recognized—keeping track of tooling, maintaining/replacing, in short, managing it. Back then such work was done with files in cabinets and index cards in card catalog–type files (and in people's heads, although that's not a great method), and so forth—today it's done with software, but the concepts/goals are the same. I could see having a short separate article for tooling, simply for the reason of helping laypeople to understand what the word connotes, rather than for the sake of having a separate article, in itself. But I haven't thought it out extensively. I will give it some thought ...
    - It may not necessitate its own article, though there is enough science behind it to make one, Shrink Fitting is a process used on all spin tooling. It is definitely worth mentioning in a Tooling article. Will Prater
      - An IP editor recently changed the Tooling page from a redirect to an in-text request for deletion, and he also went around to a couple of other articles removing See also links to Tool management [1] [2]. I left a message on his talk page asking him about it, but I've never actually seen an IP editor respond. —Kierkkadon^{talk/contribs} 20:52, 12 February 2013 (UTC)[reply]
Shaping (metalworking) Wizard191 (talk) 14:37, 6 February 2010 (UTC)[reply]
- I redirected this page to Forming (metalworking) as that's the more common term (as far as I know). Am new to Wikipedia so I hope that's ok. CSK45Kays (talk) 16:05, 3 February 2022 (UTC)[reply]
~~Diffusion bonding Wizard191 (talk) 14:37, 6 February 2010 (UTC)~~[reply]
- Done. --Kierkkadon^{talk/contribs} 17:56, 4 February 2013 (UTC)[reply]
- Solid-state welding Wizard191 (talk) 17:22, 12 February 2010 (UTC)[reply]
Gravity casting (see zinc aluminium) Wizard191 (talk) 19:23, 24 February 2010 (UTC)[reply]
Direct chill casting Wizard191 (talk) 17:31, 25 March 2010 (UTC)[reply]
Laser machining (currently a redirect) - Here's a good ref: [3]. Wizard191 (talk) 21:58, 30 April 2010 (UTC)[reply]
- Why does this need to be its own article? What would Laser machining cover that Laser cutting doesn't? --Kierkkadon^{talk/contribs} 19:26, 28 January 2013 (UTC)[reply]
Autogrinder Wizard191 (talk) 13:32, 7 May 2010 (UTC)[reply]
~~Milling (machining) Wizard191 (talk) 22:41, 18 May 2010 (UTC)~~[reply]
- Done. --Kierkkadon^{talk/contribs} 05:36, 29 January 2013 (UTC)[reply]
- ~~Gang milling needs to be merged into this after its creation. Wizard191 (talk) 22:41, 18 May 2010 (UTC)~~[reply]
  - And done. --Kierkkadon^{talk/contribs} 01:36, 30 January 2013 (UTC)[reply]
Cadillac gauge/Cadillac gage Wizard191 (talk) 23:29, 25 December 2010 (UTC)[reply]
Isothermal forging, It exist in Spanish WP ( es:Forjado isotérmico ). --Armando-Martin (talk) 11:09, 2 May 2011 (UTC)[reply]
Bull pin. Unclear (to me, who knows very little about metalworking) how a bull pin differs from a drift pin. -- RoySmith (talk) 12:19, 29 May 2017 (UTC)[reply]
- Its not a pin really in sense of Metalworking but belongs to the family of Awl -es like a Bradawl. It most likely got its name for its common use in construction working for lining up a steel element hanging from a crane tru the holes (bulls eye) they get connected on with screws or rivets. --Kharon (talk) 20:31, 31 May 2017 (UTC)[reply]

Contributors

User	Current projects
Kierkkadon	I'm trying to restart this whole WikiProject. I do whatever work I can on articles, especially adding references to metallurgical manuals and materials textbooks. I rewrote this Project page, trying to give it a cleaner look while simultaneously updating the to-do lists and resources. --Kierkkadon^{talk/contribs} 18:44, 22 January 2013 (UTC)[reply]
¾-10	Article expansion. Referencing improvement. Watchlisting to revert vandalism. Making chips. Sharing knowledge. Content areas that I have a soft spot for include industrial history, machine tools and machine tool builders, reading the memoirs of "practical men", as they used to put it years ago (as well as practical women). But I also end up editing in other areas too ... — ¾-10 00:14, 23 January 2013 (UTC)[reply]
User:M Trigg-Hogarth	I am hoping to help with the surface engineering side of things but new to contributing to Wikipedia so please bear with me! February 2014
JP1308	I am a mechanical engineer and welding engineer and I hope I can support this project. JP1308 09:45, 30 July 2017 (UTC)[reply]
Стиво	I've worked with metal for a long time, and I'm hoping to contribute little bits and pieces over time to clean up and flesh out some of the more neglected topics. Стиво (talk) 07:10, 26 December 2017 (UTC)[reply]
User:Theahaiku	I've been working in the machinery department, mostly related to manufacturing. Been to several trade shows with lots of cutting machines, waterjets, CNCs, etc. I would love to contribute to this project. --Theahaiku (talk) 08:25, 6 April 2018 (UTC)[reply]
Vulcan_	I am a blacksmith and member of the Guild of Artist Smiths of Belgium (Ambachtelijk Smedersgilde van België or ASG). I was very surprised to see no mentinon of smithing on this page so I will see what I can do to rectify that — vulcan_ (talk contrib) 21:24, 10 April 2020 (UTC)[reply]
AutoElectEngr	I am a retired Electrical/Automation Engineer. I worked on the automation of Tandem Rolling Mills in Australia, especially the setup and control of the thickness, tension and force loops. I have written a draft article which I intend to add to Wikipedia soon. 6 November 2020. I published my notes on 24 Nov 2020. Since that page was made the main page for this topic, I have added a lot more information to it, and so believe it deserves a better quality and importance scales. Please check it out here.
memerman69	I am a general nerd, and have just recently finished my apprenticeship for forging and welding, I am saving up some money to open up my own shop.
CSK45Kays	I work in a company that specializes in shot peening and would like to improve the various pages on shot peening and its applications.

× × ×

Related projects

Wikipedia:WikiProject Technology
Wikipedia:WikiProject Engineering
Military history: Weaponry task force
Wikipedia:WikiProject Woodworking
Wikipedia:WikiProject Gemology and Jewelry
- Wikipedia:WikiProject Gemology and Jewelry/Jewelry - metallurgy and manufacturing relevant page
Wikipedia:WikiProject Mining

Templates

Navigation: {{Metalworking navbox|cast|form|mach|smith|tool|weld}}—put at the bottom of the article, just above the categories

WikiProject: {{WikiProject metalworking|class=???|importance=???}}—put on talk page

Metalworking Unassessed

	This article is within the scope of WikiProject Metalworking, a collaborative effort to improve the coverage of Metalworking on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.MetalworkingWikipedia:WikiProject MetalworkingTemplate:WikiProject MetalworkingMetalworking
???	This article has not yet received a rating on Wikipedia's content assessment scale.
???	This article has not yet received a rating on the project's importance scale.

Stubs: {{metalworking-stub}}—put at the bottom of the article, below the categories

This metalworking article is a stub. You can help Wikipedia by expanding it.

Barnstar: {{The Metalworking Barnstar|put your message here ~~~~}}—an award placed at another users talk page for improving metalworking-related articles.

		The Metalworking Barnstar
		{{{1}}}