Jump to content

Photolabile protecting group

Add links
From Wikipedia, the free encyclopedia

A photolabile protecting group (PPG; also known as: photoremovable, photosensitive, or photocleavable protecting group) is a chemical modification to a molecule that can be removed with light. PPGs enable high degrees of chemoselectivity as they allow researchers to control spatial, temporal and concentration variables with light. Control of these variables is valuable as it enables multiple PPG applications, including orthogonality in systems with multiple protecting groups. As the removal of a PPG does not require chemical reagents, the photocleavage of a PPG is often referred to as "traceless reagent processes", and is often used in biological model systems and multistep organic syntheses.[1][2][3] Since their introduction in 1962,[4] numerous PPGs have been developed and utilized in a variety of wide-ranging applications from protein science[5] to photoresists. Due to the large number of reported protecting groups, PPGs are often categorized by their major functional group(s); three of the most common classifications are detailed below.

Historical introduction

[edit]
Figure 1. Barltrop and Schofield's initial demonstration of a photolabile protecting group.

The first reported use of a PPG in the scientific literature was by Barltrop and Schofield, who in 1962 used 253.7 nm light to release glycine from N-benzylglycine.[4] Following this initial report, the field rapidly expanded throughout the 1970s as Kaplan[6] and Epstein[7] studied PPGs in a variety of biochemical systems. During this time, a series of standards for evaluating PPG performance was compiled. An abbreviated list of these standards, which are commonly called the Lester rules,[8] or Sheehan criteria[9] are summarized below:

  • In biological systems, the protected substrate, as well as the photoproducts should be highly soluble in water; in synthesis, this requirement is not as strict
  • The protected substrate, as well as the photoproducts should be stable in the photolysis environment
  • Separation of the PPG should exhibit a quantum yield greater than 0.10
  • Separation of the PPG should occur through a primary photochemical process
  • The chromophore should absorb incident light with reasonable absorptivity
  • The excitation wavelength of light should be greater than 300 nm
  • The media and photoproducts should not absorb the incident light
  • A general, high-yield synthetic procedure should exist for attaching the PPG to an unprotected substrate
  • The protected substrate and the photoproducts should be easily separated

Main classifications

[edit]

Nitrobenzyl-based PPGs

[edit]

Norrish Type II mechanism

[edit]
Figure 2. Norrish Type II mechanism for the photocleavage of a 2-nitrobenzyl-based PPG. The aci-nitro compound is drawn in the lower right.

Nitrobenzyl-based PPGs are often considered the most commonly used PPGs.[2][3] These PPGs are traditionally identified as Norrish Type II reaction as their mechanism was first described by Norrish in 1935.[10] Norrish elucidated that an incident photon (200 nm < λ < 320 nm) breaks the N=O π-bond in the nitro-group, bringing the protected substrate into a diradical excited state. Subsequently, the nitrogen radical abstracts a proton from the benzylic carbon, forming the aci-nitro compound. Depending on pH, solvent and the extent of substitution, the aci-nitro intermediate decays at a rate of roughly 102–104 s−1.[2] Following resonance of the π-electrons, a five-membered ring is formed before the PPG is cleaved yielding 2-nitrosobenzaldehyde and a carboxylic acid.

Overall, nitrobenzyl-based PPGs are highly general. The list of functional groups that can be protected include, but are not limited to, phosphates, carboxylates, carbonates, carbamates, thiolates, phenolates and alkoxides.[2] Additionally, while the rate varies with a number of variables, including choice of solvent and pH, the photodeprotection has been exhibited in both solution and in the solid-state. Under optimal conditions, the photorelease can proceed with >95% yield.[2] Nevertheless, the photoproducts of this PPG are known to undergo imine formation when irradiated at wavelengths above 300 nm.[11][12][13] This side product often competes for incident radiation, which may lead to decreased chemical and quantum yields.

Common modifications

[edit]

In attempts to raise the chemical and quantum yields of nitrobenzyl-based PPGs, several beneficial modifications have been identified. The largest increase in quantum yield and reaction rate can be achieved through substitution at the benzylic carbon.[14] However, potential substitutions must leave one hydrogen atom so the photodegradation can proceeded uninhibited.

Figure 3. A series of common nitrobenzyl-based PPGs.

Additional modifications have targeted the aromatic chromophore. Specifically, multiple studies have confirmed that the use of a 2,6-dinitrobenzyl PPG increases reaction yield.[15][16][17][18] Additionally, depending on the leaving group, the presence of a second nitro-group may nearly quadruple the quantum yield (e.g. Φ = 0.033 to Φ = 0.12 when releasing a carbonate at 365 nm).[2][19] While one may credit the increase in efficiency to the electronic effects of the second nitro group, this is not the case. Analogous systems with a 2-cyano-6-nitrobenzyl PPG exhibit similar electron-withdrawing effects, but do not provide such a large increase in efficiency. Therefore, the increase in efficiency is likely due to the increased probability of achieving the aci-nitro state; with two nitro groups, an incoming photon will be twice as likely to promote the compound into an excited state.

Finally, changing the excitation wavelength of the PPG may be advantageous. For example, if two PPGs have different excitation wavelengths one group may be removed while the other is left in place. To this end, several nitrobenzyl based PPGs display additional functionality. Common modifications include the use of 2-nitroveratryl (NV)[20] or 6-nitropiperonylmethyl (NP).[21] Both of these modifications induced red-shifting in the compounds' absorption spectra.[20]

Carbonyl-based PPGs

[edit]

Phenacyl PPGs

[edit]
Figure 4. The standard phenacyl carbon skeleton (left) with two known modifications: 3',5'-dimethoxybenzonin (DMB, top right), and p-hydroxyphenacyl (bottom right).

The phenacyl PPG is the archetypal example of a carbonyl-based PPG.[2] Under this motif, the PPG is attached to the protected substrate at the αβ-carbon, and can exhibit varied photodeprotection mechanisms based on the phenacyl skeleton, substrate identify and reaction conditions.[22][23][24][25] Overall, phenacyl PPGs can be used to protect sulfonates, phosphates, carboxylates and carbamates.

As with nitrobenzyl-based PPGs, several modifications are known. For example, the 3',5'-dimethoxybenzoin PPG (DMB) contains a 3,5-dimethoxyphenyl substituent on the carbonyl's α-carbon.[19] Under certain conditions, DMB has exhibited quantum yields as high as 0.64.[2] Additionally, the p-hydroxyphenacyl PPG (pHP) has been designed to react through a photo-Favorskii rearrangement.[26][27] This mechanism yields the carboxylic acid as the exclusive photoproduct; the key benefit of the pHP PPG is the lack of secondary photoreactions and the significantly different UV absorption profiles of the products and reactants. While the quantum yield of the p-hydroxyphenacyl PPG is generally in the 0.1-0.4 range, it can increase to near unity when releasing a good leaving group such as a tosylate. The photoextrusion of the leaving group from the pHP PPG is so effective, that it also releases even poor nucleofuges such as amines (with the quantum yield in the 0.01-0.5 range, and dependent on solution pH).[28] The Additionally, photorelease occurs on the nanosecond timeframe, with krelease > 108 s−1.[2] The o-hydroxyphenacyl PPG has been introduced as an alternative with absorption band shifted closer towards the visible region, however it has slightly lower quantum yields of deprotection (generally 0.1-0.3) due to excited state proton transfer available as an alternative deactivation pathway.[29]

The phenacyl moiety itself contains one chiral carbon atom in the backbone. The protected group (leaving group) is not directly attached to this chiral carbon atom, however has been shown to be able to work as a chiral auxiliary directing approach of a diene to a dienophile in a stereoselective thermal Diels–Alder reaction.[30] The auxiliary is then removed simply upon irradiation with UV light.

Photoenolization through γ-hydrogen abstraction

[edit]

Another family of carbonyl-based PPGs exists that is structurally like the phenacyl motif, but which reacts through a separate mechanism.[31][32][33] As the name suggests, these PPGs react through abstraction of the carbonyl's γ-hydrogen. The compound is then able to undergo a photoenolization, which is mechanistically like a keto-enol tautomerization. From the enol form, the compound can finally undergo a ground-state transformation that releases the substrate. The quantum yield of this mechanism directly corresponds to the ability of the protected substrate to be a good leaving group. For good leaving groups, the rate-determining step is either hydrogen abstraction or isomerization; however, if the substrate is a poor leaving group, release is the rate-determining step.

Benzyl-based PPGs

[edit]
Figure 5: Benzyl-based PPGs with polycyclic aromatic cores: A) benzene; B) naphthalene; C) anthracene; D) phenanthrene; E) phyene and; F) perylene.

Barltrop and Schofield first demonstrated the use of a benzyl-based PPG,[4] structural variations have focused on substitution to the benzene ring, as well as extension of the aromatic core. For example, insertion of a m,m’-dimethoxy substituent was shown to increase the chemical yield ~75% due to what has been termed the “excited state meta effect.”[2][34][35] However, this substitution is only able to release good leaving groups such as carbamates and carboxylates. Additionally, the addition of an o-hydroxy group enables the release of alcohols, phenols and carboxylic acids due to the proximity of the phenolic hydroxy to the benzylic leaving group.[36][37] Finally, the carbon skeleton has been expanded to include PPGs based on naphthalene,[38] anthracene,[39] phenanthrene,[40] pyrene[41] and perylene[42] cores, resulting in varied chemical and quantum yields, as well as irradiation wavelengths and times.

Applications

[edit]

Use in total synthesis

[edit]

Despite their many advantages, the use of PPGs in total syntheses are relatively rare.[43] Nevertheless, PPGs’ "orthogonality" to common synthetic reagents, as well as the possibility of conducting a "traceless reagent process", has proven useful in natural product synthesis. Two examples include the syntheses of ent-Fumiquinazoline[44] and (-)-diazonamide A.[45] The syntheses required irradiation at 254 and 300 nm, respectively.

Figure 7. The total synthesis of (-)-diazonamide A (above) requires the use of PPGs.
Figure 6. The final step in Busuyek's synthesis of ent-Fumiquinazoline is the removal of a 2-nitrobenzyl PPG through a Norrish Type II mechanism.

Photocaging

[edit]
Figure 8. A photocaged reagent, neurotransmitter, and therapeutic from left to right, respectively.

Protecting a substrate with a PPG is commonly referred to as "photocaging." This term is especially popular in biological systems. For example, Ly et al. developed a p-iodobenzoate-based photocaged reagent, which would experience a homolytic photoclevage of the C-I bond.[46] They found that the reaction could occur with excellent yields, and with a half-life of 2.5 minutes when a 15 W 254 nm light source was used. The resulting biomolecular radicals are necessary in many enzymatic processes. As a second example, researchers synthesized a cycloprene-modified glutamate photocaged with a 2-nitroveratrol-based PPG. As it is an excitatory amino acid neurotransmitter, the aim was to develop a bioorthagonal probe for glutamate in vivo.[47] In a final example, Venkatesh et al. demonstrated the use of a PPG-based photocaged therapeutic.[48] Their prodrug, which released one equivalent of caffeic acid and chlorambucil upon phototriggering, showed reasonable biocompatibility, cellular uptake and photoregulared drug release in vitro.

Figure 9. Many of the photoresists developed at Bell Laboratories centered around the 2-nitrobenzyl cholate motif.

Photoresists

[edit]

During the 1980s, AT&T Bell Laboratories explored the use of nitrobenzyl-based PPGs as photoresists.[49][50][51][52] Over the course of the decade, they developed a deep UV positive-tone photoresist where the protected substrate was added to a copolymer of poly(methyl methacrylate) and poly(methacrylic acid). Initially, the blend was insoluble. However, upon exposure to 260 ± 20 nm light, the PPG would be removed yielding 2-nitrosobenzaldehyde and a carboxylic acid that was soluble in aqueous base.

Surface modification

[edit]
Figure 10. Schematic of light directed polynucleotide synthesis on surfaces.

When covalently attached to a surface, PPGs do not exhibit any surface-induced properties (i.e. they behave like PPGs in solution, and do not exhibit any new properties because of their proximity to a surface).[53] Consequently, PPGs can be patterned on a surface and removed in manner analogous to lithography to create a multifunctionalized surface.[54] This process was first reported by Solas in 1991;[55] protected nucleotides were attached to a surface and spatially-resolved single stranded polynucleotides were generated in a step-wise “grafting from” method. In separate studies, there have been multiple reports of using PPGs to enable the selective separation of blocks within block-copolymers to expose fresh surfaces.[56][57][58] Furthermore, this surface patterning method has since been extended to proteins.[59][60] Caged etching agents (such as hydrogen fluoride protected with 4-hydroxyphenacyl) allows to etch only surfaces exposed to light.[61]

Gels

[edit]

Various PPGs, often featuring the 2-nitrobenzyl motif, have been used to generate numerous gels.[54] In one example, researchers incorporated PPGs into a silica-based sol-gel.[62] In a second example, a hydrogel was synthesized to include protected Ca2+ ions.[63][64] Finally, PPGs have been utilized to cross-link numerous photodegradable polymers, which have featured linear, multi-dimensional network, dendrimer, and branched structures.[58][65][66][67][68]

References

[edit]
  1. ^ Givens, R. S.; Conrad, III, P. G.; Yousef, A. L.; Lee, J.-I. (2004). "69". In Horspool, William (ed.). CRC Handbook of Organic Photochemistry and Photobiology (2nd ed.). Boca Raton, Fla.: CRC Press. pp. 69–1–69–46. ISBN 978-0849313486.{{cite book}}: CS1 maint: multiple names: authors list (link)
  2. ^ a b c d e f g h i j Wang, Pengfei (June 2013). "Photolabile Protecting Groups: Structure and Reactivity". Asian Journal of Organic Chemistry. 2 (6): 452–464. doi:10.1002/ajoc.201200197.
  3. ^ a b Bochet, C. G. (7 January 2002). "Photolabile Protecting Groups and Linkers". Journal of the Chemical Society, Perkin Transactions 1 (2): 125–142. doi:10.1039/B009522M.
  4. ^ a b c Barltrop, J. A.; Schofield, P. (January 1962). "Photosensitive Protecting Groups". Tetrahedron Letters. 3 (16): 697–699. doi:10.1016/S0040-4039(00)70935-X.
  5. ^ Rock, Ronald S.; Hansen, Kirk C.; Larsen, Randy W.; Chan, Sunney I. (2004). "Rapid Photochemical Triggering of Protein Unfolding in a Nondenaturing Environment". Chemical Physics. 307 (2): 201–208. Bibcode:2004CP....307..201R. doi:10.1016/j.chemphys.2004.05.037.
  6. ^ Kaplan, J. H.; Forbush, B.; Hoffman, J. F. (May 1978). "Rapid Photolytic Release of Adenosine 5'-Triphosphate from a Protected Analog: Utilization by the Sodium:Potassium Pump of Human Red Blood Cell Ghosts". Biochemistry. 17 (10): 1929–1935. doi:10.1021/bi00603a020. PMID 148906.
  7. ^ Engels, J.; Schlaeger, E. J. (July 1977). "Synthesis, Structure, and Reactivity of Adenosine Cyclic 3',5'-Phosphate-Benzyltriesters". Journal of Medicinal Chemistry. 20 (7): 907–911. doi:10.1021/jm00217a008. PMID 195057.
  8. ^ Lester, H. A.; Nerbonne, J. M. (June 1982). "Physiological and Pharmacological Manipulations with Light Flashes" (PDF). Annual Review of Biophysics and Bioengineering. 11 (1): 151–175. doi:10.1146/annurev.bb.11.060182.001055. PMID 7049061.
  9. ^ Sheehan, J. C.; Umezawa, K. (October 1973). "Phenacyl Photosensitive Blocking Groups". The Journal of Organic Chemistry. 38 (21): 3771–3774. doi:10.1021/jo00961a027.
  10. ^ Bamford, C. H.; Norrish, R. G. W. (1935). "Primary Photochemical Reactions. Part VII. Photochemical Decomposition of Isovaleraldehyde and Di-n-propyl Ketone". Journal of the Chemical Society (Resumed): 1504. doi:10.1039/JR9350001504.
  11. ^ Barltrop, J. A.; Plant, P. J.; Schofield, P. (1966). "Photosensitive Protective Groups". Chemical Communications (22): 822. doi:10.1039/C19660000822.
  12. ^ Patchornik, A.; Amit, B.; Woodward, R. B. (October 1970). "Photosensitive Protecting Groups". Journal of the American Chemical Society. 92 (21): 6333–6335. doi:10.1021/ja00724a041.
  13. ^ Il'ichev, Y. V.; Schwörer, M. A.; Wirz, Jakob (April 2004). "Photochemical Reaction Mechanisms of 2-Nitrobenzyl Compounds:  Methyl Ethers and Caged ATP". Journal of the American Chemical Society. 126 (14): 4581–4595. doi:10.1021/ja039071z. PMID 15070376.
  14. ^ Milburn, T.; Matsubara, N.; Billington, A. P.; Udgaonkar, J. B; Walker, J. W.; Carpenter, B. K.; Webb, W. W.; Marque, J.; Denk, W. (January 1989). "Synthesis, Photochemistry, and Biological Activity of a Caged Photolabile Acetylcholine Receptor Ligand". Biochemistry. 28 (1): 49–55. CiteSeerX 10.1.1.625.3046. doi:10.1021/bi00427a008. PMID 2706267.
  15. ^ Reichmanis, E.; Smith, B. C.; Gooden, R. (January 1985). "o-Nitrobenzyl Photochemistry: Solution vs. Ssolid-State Behavior". Journal of Polymer Science: Polymer Chemistry Edition. 23 (1): 1–8. Bibcode:1985JPoSA..23....1R. doi:10.1002/pol.1985.170230101.
  16. ^ Houlihan, F. M.; Shugard, A.; Gooden, R.; E. (1988). "An Evolution of Nitrobenzyl Ester Chemistry for Chemical Amplification Resists". 920: 67–74. {{cite journal}}: Cite journal requires |journal= (help)
  17. ^ Cameron, J. F.; Frechet, J. M. J. (May 1991). "Photogeneration of Organic Bases from o-Nitrobenzyl-Derived Carbamates". Journal of the American Chemical Society. 113 (11): 4303–4313. doi:10.1021/ja00011a038.
  18. ^ Neenan, T. X.; Houlihan, F. M.; Reichmanis, E.; Kometani, J. M.; Bachman, B. J.; Thompson, L. F. (January 1990). "Photo- and Thermochemistry of Select 2,6-Dinitrobenzyl Esters in Polymer Matrixes: Studies Pertaining to Chemical Amplification and Imaging". Macromolecules. 23 (1): 145–150. Bibcode:1990MaMol..23..145N. doi:10.1021/ma00203a025.
  19. ^ a b Hasan, A.; Stengele, K.-P.; Giegrich, H.; Cornwell, P.; Isham, K. R.; Sachleben, R. A.; Pfleiderer, W.; Foote, R. S. (March 1997). "Photolabile Protecting Groups for Nucleosides: Synthesis and Photodeprotection Rates". Tetrahedron. 53 (12): 4247–4264. doi:10.1016/S0040-4020(97)00154-3.
  20. ^ a b Görner, H. (2005). "Effects of 4,5-Dimethoxy Groups on the Time-Resolved Photoconversion of 2-Nitrobenzyl Alcohols and 2-Nitrobenzaldehyde into Nitroso Derivatives". Photochemical & Photobiological Sciences. 4 (10): 822–8. doi:10.1039/B506393K. PMID 16189558.
  21. ^ Pirrung, M. C.; Rana, V. S. (2005). Goeldner, U.; Givens, R. S. (eds.). Photoremovable Protecting Groups in DNA Synthesis and Microarray Fabrication. Wiley-VHC Verlag GmbH & Co. KGaA. pp. 341–368. {{cite book}}: |work= ignored (help)
  22. ^ Givens, R. S.; Athey, P. S.; Kueper, L. W.; Matuszewski, B.; Xue, J. Y (October 1992). "Photochemistry of Alpha-Keto Phosphate Esters: Photorelease of a Caged cAMP". Journal of the American Chemical Society. 114 (22): 8708–8710. doi:10.1021/ja00048a059.
  23. ^ Chelain, E.; Parlier, A.; Audouin, M.; Rudler, H.; Daran, J. C.; Vaissermann, J (November 1993). "Reaction of Aminocarbene Complexes of Chromium with Alkynes. 2. Intramolecular Insertions Leading to Polycyclic Lactams". Journal of the American Chemical Society. 115 (23): 10568–10580. doi:10.1021/ja00076a015.
  24. ^ An, H.-Y.; Kwok, W. M.; Ma, C.; Guan, X.; Kan, J. T. W.; Toy, P. H.; Phillips, D. L. (3 September 2010). "Photophysics and Photodeprotection Reactions of Methoxyphenacyl Phototriggers: An Ultrafast and Nanosecond Time-Resolved Spectroscopic and Density Functional Theory Study". The Journal of Organic Chemistry. 75 (17): 5837–5851. doi:10.1021/jo100848b. PMID 20684501.
  25. ^ Banerjee, A.; Falvey, D> E. (April 1998). "Direct Photolysis of Phenacyl Protecting Groups Studied by Laser Flash Photolysis:  An Excited State Hydrogen Atom Abstraction Pathway Leads to Formation of Carboxylic Acids and Acetophenone". Journal of the American Chemical Society. 120 (12): 2965–2966. doi:10.1021/ja971431t.
  26. ^ Givens, R. S.; Park, C.-H. (August 1996). "p-Hydroxyphenacyl ATP1: A New Phototrigger". Tetrahedron Letters. 37 (35): 6259–6262. doi:10.1016/0040-4039(96)01390-1.
  27. ^ Park, C.-H.; Givens, R. S. (March 1997). "New Photoactivated Protecting Groups. 6. Hydroxyphenacyl: A Phototrigger for Chemical and Biochemical Probes". Journal of the American Chemical Society. 119 (10): 2453–2463. doi:10.1021/ja9635589.
  28. ^ Bownik, Iwona; Šebej, Peter; Literák, Jaromír; Heger, Dominik; Šimek, Zdeněk; Givens, Richard S.; Klán, Petr (2015-10-02). "4-Hydroxyphenacyl Ammonium Salts: A Photoremovable Protecting Group for Amines in Aqueous Solutions". The Journal of Organic Chemistry. 80 (19): 9713–9721. doi:10.1021/acs.joc.5b01770. ISSN 0022-3263. PMID 26373949.
  29. ^ Šebej, Peter (2012). "2-Hydroxyphenacyl ester: a new photoremovable protecting group". Photochemical and Photobiological Sciences. 11 (9): 1465–1475. doi:10.1039/C2PP25133G. PMC 3422872. PMID 22766787.
  30. ^ Kammath, Viju Balachandran (2012). "Photoremovable chiral auxiliary". Photochemical and Photobiological Sciences. 11 (9): 500–507. doi:10.1039/C1PP05096F. PMID 21701728. S2CID 22958029.
  31. ^ Tseng, S.-S.; Ullman, E. F. (January 1976). "Elimination Reactions Induced By Photoenolization of o-Alkylbenzophenones". Journal of the American Chemical Society. 98 (2): 541–544. doi:10.1021/ja00418a037.
  32. ^ Atemnkeng, W. N.; Louisiana, L. D.; Yong, P. K.; Vottero, B.; Banerjee, A. (November 2003). "1-[2-(2-Hydroxyalkyl)phenyl]ethanone: A New Photoremovable Protecting Group for Carboxylic Acids". Organic Letters. 5 (23): 4469–4471. doi:10.1021/ol035782q. PMID 14602027.
  33. ^ Pirrung, M. C.; Roy, B. G.; Gadamsetty, S. (April 2010). "Structure-Reactivity Relationships in (2-Hydroxyethyl)benzophenone Photoremovable Protecting Groups". Tetrahedron. 66 (17): 3147–3151. doi:10.1016/j.tet.2010.02.087.
  34. ^ Chamberlin, J. W. (1966). "Use of the 3,5-Dimethoxybenzyloxycarbonyl Group as a Photosensitive N-Protecting Group". Journal of Organic Chemistry. 31 (5): 1658–1660. doi:10.1021/jo01343a516.
  35. ^ Birr, C.; Lochinger, W.; Stahnke, G.; Lang, P. (24 November 1972). "Der α.α-Dimethyl-3.5-Dimethoxybenzyloxycarbonyl (Ddz)-Rest, Eine Photo- und Säurelabile Stickstoff-Schutzgruppe Für die Peptidchemie". Justus Liebigs Annalen der Chemie. 763 (1): 162–172. doi:10.1002/jlac.19727630118. PMID 4643478.
  36. ^ Kostikov, A. P.; Popik, V. V. (November 2007). "2,5-Dihydroxybenzyl and (1,4-Dihydroxy-2-naphthyl)methyl, Novel Reductively Armed Photocages for the Hydroxyl Moiety". The Journal of Organic Chemistry. 72 (24): 9190–9194. doi:10.1021/jo701426j. PMID 17958445.
  37. ^ Wan, P.; Chak, B. (1986). "Structure–Reactivity Studies and Catalytic Effects in the Photosolvolysis of Methoxy-Substituted Benzyl Alcohols". J. Chem. Soc., Perkin Trans. 2 (11): 1751–1756. doi:10.1039/P29860001751.
  38. ^ Givens, R. S.; Matuszewski, B. (October 1984). "Photochemistry of Phosphate Esters: An Efficient Method for the Generation of Electrophiles". Journal of the American Chemical Society. 106 (22): 6860–6861. doi:10.1021/ja00334a075.
  39. ^ Singh, A. K.; Khade, P. K. (August 2005). "Anthracene-9-methanol—A Novel Fluorescent Phototrigger for Biomolecular Caging". Tetrahedron Letters. 46 (33): 5563–5566. doi:10.1016/j.tetlet.2005.06.026. S2CID 55382399.
  40. ^ Furuta, T.; Hirayama, Y.; Iwamura, M. (June 2001). "Anthraquinon-2-ylmethoxycarbonyl (Aqmoc): A New Photochemically Removable Protecting Group for Alcohols". Organic Letters. 3 (12): 1809–1812. doi:10.1021/ol015787s. PMID 11405717.
  41. ^ Furuta, T.; Torigai, H.; Osawa, T.; Iwamura, M. (July 1993). "New Photochemically Labile Protecting Group for Phosphates". Chemistry Letters. 22 (7): 1179–1182. doi:10.1246/cl.1993.1179.
  42. ^ Jana, A.; Ikbal, M.; Singh, N. D. P. (January 2012). "Perylen-3-ylmethyl: Fluorescent Photoremovable Protecting Group (FPRPG) for Carboxylic Acids and Alcohols". Tetrahedron. 68 (4): 1128–1136. doi:10.1016/j.tet.2011.11.074.
  43. ^ Hoffmann, N. (March 2008). "Photochemical Reactions as Key Steps in Organic Synthesis". Chemical Reviews. 108 (3): 1052–1103. doi:10.1021/cr0680336. PMID 18302419.
  44. ^ Snider, B. B.; Busuyek, M. V. (April 2001). "Synthesis of Circumdatin F and Sclerotigenin. Use of the 2-Nitrobenzyl Group for Protection of a Diketopiperazine Amide; Synthesis of ent-Fumiquinazoline G". Tetrahedron. 57 (16): 3301–3307. doi:10.1016/S0040-4020(01)00208-3.
  45. ^ Li, J.; Jeong, S.; Esser, L.; Harran, P. G. (17 December 2001). "Total Synthesis of Nominal Diazonamides-Part 1: Convergent Preparation of the Structure Proposed for (−)-Diazonamide A". Angewandte Chemie International Edition. 40 (24): 4765–4769. doi:10.1002/1521-3773(20011217)40:24<4765::AID-ANIE4765>3.0.CO;2-1. PMID 12404411.
  46. ^ Ly, Tony; Zhang, Xing; Sun, Qingyu; Moore, Benjamin; Tao, Yuanqi; Julian, Ryan R. (2011-02-21). "Rapid, quantitative, and site specific synthesis of biomolecular radicals from a simple photocaged precursor". Chemical Communications. 47 (10): 2835–7. doi:10.1039/c0cc03363d. ISSN 1364-548X. PMID 21258679.
  47. ^ Kumar, Pratik; Shukhman, David; Laughlin, Scott T. (2016-12-21). "A photocaged, cyclopropene-containing analog of the amino acid neurotransmitter glutamate". Tetrahedron Letters. 57 (51): 5750–5752. doi:10.1016/j.tetlet.2016.10.106. PMC 6150495. PMID 30245532.
  48. ^ Venkatesh, Yarra; Rajesh, Y.; Karthik, S.; Chetan, A C; Mandal, Mahitosh; Jana, Avijit; Singh, N. D. Pradeep (2016-11-18). "Photocaging of Single and Dual (Similar or Different) Carboxylic and Amino Acids by Acetyl Carbazole and its Application as Dual Drug Delivery in Cancer Therapy". The Journal of Organic Chemistry. 81 (22): 11168–11175. doi:10.1021/acs.joc.6b02152. ISSN 0022-3263. PMID 27754672.
  49. ^ Reichmanis, E.; Smith, B. C.; Gooden, R. (January 1985). "o-Nitrobenzyl Photochemistry: Solution vs. Solid-State Behavior". Journal of Polymer Science: Polymer Chemistry Edition. 23 (1): 1–8. Bibcode:1985JPoSA..23....1R. doi:10.1002/pol.1985.170230101.
  50. ^ Houlihan, F. M.; Shugard, A.; Gooden, R.; Reichmanis, E. (1988). MacDonald, Scott A (ed.). "An Evaluation of Nitrobenzyl Ester Chemistry for Chemical Amplification Resists". Society of Photo-Optical Instrumentation Engineers (Spie) Conference Series. Advances in Resist Technology and Processing V. 920: 67–74. Bibcode:1988SPIE..920...67H. doi:10.1117/12.968303. S2CID 98697436.
  51. ^ Reichmanis, E.; Gooden, R.; Wilkins, C. W.; Schonhorn, H. (April 1983). "A Study of the Photochemical Response of o-Nitrobenzyl Cholate Derivatives in P(MMA-MAA) Matrices". Journal of Polymer Science: Polymer Chemistry Edition. 21 (4): 1075–1083. Bibcode:1983JPoSA..21.1075R. doi:10.1002/pol.1983.170210415.
  52. ^ Houlihan, F. M.; Shugard, A.; Gooden, R.; Reichmanis, E. (July 1988). "Nitrobenzyl Ester Chemistry for Polymer Processes Involving Chemical Amplification". Macromolecules. 21 (7): 2001–2006. Bibcode:1988MaMol..21.2001H. doi:10.1021/ma00185a019.
  53. ^ San Miguel, V.; Bochet, C. G.; del Campo, A. (13 April 2011). "Wavelength-Selective Caged Surfaces: How Many Functional Levels Are Possible?". Journal of the American Chemical Society. 133 (14): 5380–5388. doi:10.1021/ja110572j. hdl:10016/24531. PMID 21413802.
  54. ^ a b Fodor, S. P.; Read, J. L.; Orrung, M. C.; Stryer, L.; Lu, A. T.; Solas, D. (1991). "Light-Directed, Spatially Addressable Parallel Chemical Synthesis". Science. 251 (4995): 767–773. Bibcode:1991Sci...251..767F. doi:10.1126/science.1990438. PMID 1990438.
  55. ^ Theato, P. (20 June 2011). "One is Enough: Influencing Polymer Properties with a Single Chromophoric Unit". Angewandte Chemie International Edition. 50 (26): 5804–5806. doi:10.1002/anie.201100975. PMID 21618368.
  56. ^ Schumers, J.-M.; Fustin, C.-A.; Gohy, J.-F. (15 September 2010). "Light-Responsive Block Copolymers". Macromolecular Rapid Communications. 31 (18): 1588–1607. doi:10.1002/marc.201000108. PMID 21567570.
  57. ^ Zhao, H.; Sterner, E. S.; Coughlin, E. B.; Theato, P. (28 February 2012). "Nitrobenzyl Alcohol Derivatives: Opportunities in Polymer and Materials Science". Macromolecules. 45 (4): 1723–1736. Bibcode:2012MaMol..45.1723Z. doi:10.1021/ma201924h.
  58. ^ a b Cui, J.; Miguel, V. S.; del Campo, A. (25 February 2013). "Light-Triggered Multifunctionality at Surfaces Mediated by Photolabile Protecting Groups". Macromolecular Rapid Communications. 34 (4): 310–329. doi:10.1002/marc.201200634. PMID 23225073.
  59. ^ Xia, Sijing; Cartron, Michaël; Morby, James; Bryant, Donald A.; Hunter, C. Neil; Leggett, Graham J. (2016-02-23). "Fabrication of Nanometer- and Micrometer-Scale Protein Structures by Site-Specific Immobilization of Histidine-Tagged Proteins to Aminosiloxane Films with Photoremovable Protein-Resistant Protecting Groups". Langmuir. 32 (7): 1818–1827. doi:10.1021/acs.langmuir.5b04368. ISSN 0743-7463. PMC 4848731. PMID 26820378.
  60. ^ Alang Ahmad, Shahrul A.; Wong, Lu Shin; ul-Haq, Ehtsham; Hobbs, Jamie K.; Leggett, Graham J.; Micklefield, Jason (2011-03-02). "Protein Micro- and Nanopatterning Using Aminosilanes with Protein-Resistant Photolabile Protecting Groups" (PDF). Journal of the American Chemical Society. 133 (8): 2749–2759. doi:10.1021/ja1103662. ISSN 0002-7863. PMID 21302963.
  61. ^ Slanina, Tomáš; Šebej, Peter; Heckel, Alexander; Givens, Richard S.; Klán, Petr (2015-09-17). "Caged Fluoride: Photochemistry and Applications of 4-Hydroxyphenacyl Fluoride". Organic Letters. 17 (19): 4814–4817. doi:10.1021/acs.orglett.5b02374. PMID 26378924.
  62. ^ Yamaguchi, K.; Kitabatake, T.; Izawa, M.; Fujiwara, T.; Nishimura, H.; Futami, T. (March 2000). "Novel Silane Coupling Agents Containing a Photolabile 2-Nitrobenzyl Ester for Introduction of a Carboxy Group on the Surface of Silica Gel". Chemistry Letters. 29 (3): 228–229. doi:10.1246/cl.2000.228.
  63. ^ Pasparakis, G.; Manouras, T.; Selimis, A.; Vamvakaki, M.; Argitis, P. (26 April 2011). "Laser-Induced Cell Detachment and Patterning with Photodegradable Polymer Substrates". Angewandte Chemie International Edition. 50 (18): 4142–4145. doi:10.1002/anie.201007310. PMID 21433230.
  64. ^ Johnson, J. A.; Baskin, J. M.; Bertozzi, C. R.; Koberstein, J. T.; Turro, N. J. (2008). "Copper-Free Click Chemistry for the In-Situ Crosslinking of Photodegradable Star Polymers". Chemical Communications (26): 3064–3066. doi:10.1039/B803043J. PMC 2667816. PMID 18688349.
  65. ^ Kevwitch, R. M.; McGrath, D. V. (2002). "Synthesis of Photolabile Dendrimer Cores". Synthesis. 2002 (9): 1171–1176. doi:10.1055/s-2002-32530.
  66. ^ Johnson, J. A.; Finn, M. G.; Koberstein, J. T.; Turro, N. J. (May 2007). "Synthesis of Photocleavable Linear Macromonomers by ATRP and Star Macromonomers by a Tandem ATRP−Click Reaction:  Precursors to Photodegradable Model Networks". Macromolecules. 40 (10): 3589–3598. Bibcode:2007MaMol..40.3589J. CiteSeerX 10.1.1.545.5948. doi:10.1021/ma062862b.
  67. ^ Stokke, B. T.; Draget, K. I.; Smidsrød, O.; Yuguchi, Y.; Urakawa, H.; Kajiwara, K. (March 2000). "Small-Angle X-Ray Scattering and Rheological Characterization of Alginate Gels. 1. Ca−Alginate Gels". Macromolecules. 33 (5): 1853–1863. Bibcode:2000MaMol..33.1853S. doi:10.1021/ma991559q.
  68. ^ Ellis-Davies, G> C. R. (May 2008). "Neurobiology with Caged Calcium". Chemical Reviews. 108 (5): 1603–1613. doi:10.1021/cr078210i. PMID 18447376.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Photolabile_protecting_group&oldid=1260282235"