Jump to content

Petrochemical

From Wikipedia, the free encyclopedia
(Redirected from Petro-chemical)
Petrochemical plant in Saudi Arabia

Petrochemicals (sometimes abbreviated as petchems[1]) are the chemical products obtained from petroleum by refining. Some chemical compounds made from petroleum are also obtained from other fossil fuels, such as coal or natural gas, or renewable sources such as maize, palm fruit or sugar cane.

The two most common petrochemical classes are olefins (including ethylene and propylene) and aromatics (including benzene, toluene and xylene isomers).

Oil refineries produce olefins and aromatics by fluid catalytic cracking of petroleum fractions. Chemical plants produce olefins by steam cracking of natural gas liquids like ethane and propane. Aromatics are produced by catalytic reforming of naphtha. Olefins and aromatics are the building-blocks for a wide range of materials such as solvents, detergents, and adhesives. Olefins are the basis for polymers and oligomers used in plastics, resins, fibers, elastomers, lubricants, and gels.[2][3]

Global ethylene production was 190 million tonnes and propylene was 120 million tonnes in 2019.[4] Aromatics production is approximately 70 million tonnes. The largest petrochemical industries are located in the United States and Western Europe; however, major growth in new production capacity is in the Middle East and Asia. There is substantial inter-regional petrochemical trade.

Primary petrochemicals are divided into three groups depending on their chemical structure:

In 2007, the amounts of ethylene and propylene produced in steam crackers were about 115 Mt (megatonnes) and 70 Mt, respectively.[5] The output ethylene capacity of large steam crackers ranged up to as much as 1.0 – 1.5 Mt per year.[6]

The adjacent diagram schematically depicts the major hydrocarbon sources and processes used in producing petrochemicals.[2][3][7][8]

Petrochemical feedstock sources

Like commodity chemicals, petrochemicals are made on a very large scale. Petrochemical manufacturing units differ from commodity chemical plants in that they often produce a number of related products. Compare this with specialty chemical and fine chemical manufacture where products are made in discrete batch processes.

Petrochemicals are predominantly made in a few manufacturing locations around the world, for example in Jubail and Yanbu Industrial Cities in Saudi Arabia, Texas and Louisiana in the US, in Teesside in the Northeast of England in the United Kingdom, in Tarragona in Catalonia, in Rotterdam in the Netherlands, in Antwerp in Belgium, in Jamnagar, Dahej in Gujarat, India and in Singapore. Not all of the petrochemical or commodity chemical materials produced by the chemical industry are made in one single location but groups of related materials are often made in adjacent manufacturing plants to induce industrial symbiosis as well as material and utility efficiency and other economies of scale. This is known in chemical engineering terminology as integrated manufacturing. Specialty and fine chemical companies are sometimes found in similar manufacturing locations as petrochemicals but, in most cases, they do not need the same level of large-scale infrastructure (e.g., pipelines, storage, ports, and power, etc.) and therefore can be found in multi-sector business parks.

The large-scale petrochemical manufacturing locations have clusters of manufacturing units that share utilities and large-scale infrastructures such as power stations, storage tanks, port facilities, road and rail terminals. In the United Kingdom, for example, there are four main locations for such manufacturing: near the River Mersey in North West England, on the Humber on the East coast of Yorkshire, in Grangemouth near the Firth of Forth in Scotland, and in Teesside as part of the Northeast of England Process Industry Cluster (NEPIC). To demonstrate the clustering and integration, some 50% of the United Kingdom's petrochemical and commodity chemicals are produced by the NEPIC industry cluster companies in Teesside.

History

[edit]

In 1835, Henri Victor Regnault, a French chemist left vinyl chloride in the sun and found white solid at the bottom of the flask which was polyvinyl chloride. In 1839, Eduard Simon discovered polystyrene by accident by distilling storax. In 1856, William Henry Perkin discovered the first synthetic dye, Mauveine. In 1888, Friedrich Reinitzer, an Austrian plant scientist observed cholesteryl benzoate had two different melting points. In 1909, Leo Hendrik Baekeland invented bakelite made from phenol and formaldehyde. In 1928, synthetic fuels were invented using Fischer-Tropsch process. In 1929, Walter Bock invented synthetic rubber Buna-S which is made up of styrene and butadiene and used to make car tires. In 1933, Otto Röhm polymerized the first acrylic glass methyl methacrylate. In 1935, Michael Perrin invented polyethylene. In 1937, Wallace Hume Carothers invented nylon. In 1938, Otto Bayer invented polyurethane. In 1941, Roy Plunkett invented Teflon. In 1946, he invented Polyester. Polyethylene terephthalate (PET) bottles are made from ethylene and paraxylene. In 1949, Fritz Stastny turned polystyrene into foam. After World War II, polypropylene was discovered in the early 1950s. In 1965, Stephanie Kwolek invented Kevlar.[9]

Olefins

[edit]

The following is a partial list of major commercial petrochemicals and their derivatives:

Chemicals produced from ethylene
Chemicals produced from propylene

Aromatics

[edit]
Chemicals produced from benzene
Chemicals produced from toluene
Chemicals produced from xylenes

List of petrochemicals

[edit]
Petrochemicals Fibers Petroleum Chemicals
Basic Feedstock
Benzene
Butadiene
Ethylene
p-Xylene
Propylene

Intermediates
2-Ethylhexanol (2-EH)
Acetic acid
Acrylonitrile (AN)
Ammonia
Bis(2-ethylhexyl) phthalate (dioctyl phthalate)
n-Butene
Cyclohexane
Dimethyl terephthalate (DMT)
Dodecylbenzene
Ethanol
Ethanolamine
Ethoxylate
1,2-Dichloroethane (ethylene dichloride or EDC)
Ethylene glycol (EG)
Ethylene oxide (EO)
Formaldehyde Moulding Compound (FMC)
n-Hexene
Linear alkyl benzene (LAB)
Methanol
Methyl tert-butyl ether (MTBE)
Phenol
Propylene oxide
Purified terephthalic acid (PTA)
Styrene monomer (SM)
Thermosetting Resin (Urea/Melamine)
Vinyl acetate monomer (VAM)
Vinyl chloride monomer (VCM)

Acrylic fiber
Acrylonitrile butadiene styrene (ABS)
Acrylonitrile styrene (AS)
Polybutadiene (PBR)
Polyvinyl chloride (PVC)
Polyethylene (PE)
Polyethylene terephthalate (PET)
Polyol
Polypropylene (PP)
Polystyrene (PS)
Styrene butadiene (SBR)
Acrylic-formaldehude (AF)
Lubricants
Additives
Catalysts
Marine fuel oil
Petroleum refining
Adhesives and sealants
Agrochemicals
Construction chemicals
Corrosion control chemicals
Cosmetics raw materials
Electronic chemicals and materials
Flavourings, fragrances, food additives
Pharmaceutical drugs
Specialty and industrial chemicals
Specialty and industrial gases
Inks, dyes and printing supplies
Packaging, bottles, and containers
Paint, coatings, and resins
Polymer additives
Specialty and life sciences chemicals
Surfactants and cleaning agents

See also

[edit]

References

[edit]
  1. ^ Kiesche, Liz, "Royal Dutch Shell may take 50% stake in $9B Indian petchem project", Reuters via Seeking Alpha, August 12, 2020. Retrieved 2020-08-12.
  2. ^ a b Sami Matar and Lewis F. Hatch (2001). Chemistry of Petrochemical Processes. Gulf Professional Publishing. ISBN 0-88415-315-0.
  3. ^ a b Staff (March 2001). "Petrochemical Processes 2001". Hydrocarbon Processing: 71–246. ISSN 0887-0284.
  4. ^ "Ethylene production capacity globally 2024".
  5. ^ Hassan E. Alfadala; G.V. Rex Reklaitis; Mahmoud M. El-Halwagi, eds. (2009). Proceedings of the 1st Annual Gas Processing Symposium, Volume 1: January, 2009 – Qatar (1st ed.). Elsevier Science. pp. 402–414. ISBN 978-0-444-53292-3.
  6. ^ Steam Cracking: Ethylene Production[permanent dead link] (PDF page 3 of 12 pages)
  7. ^ SBS Polymer Supply Outlook
  8. ^ Jean-Pierre Favennec, ed. (2001). Petroleum Refining: Refinery Operation and Management. Editions Technip. ISBN 2-7108-0801-3.
  9. ^ "Timeline – Petrochemicals Europe". www.petrochemistry.eu. Retrieved 2018-04-07.
  10. ^ Han, Y. -F.; Wang, J. -H.; Kumar, D.; Yan, Z.; Goodman, D. W. (2005-06-10). "A kinetic study of vinyl acetate synthesis over Pd-based catalysts: kinetics of vinyl acetate synthesis over Pd–Au/SiO2 and Pd/SiO2 catalysts". Journal of Catalysis. 232 (2): 467–475. doi:10.1016/j.jcat.2005.04.001. ISSN 0021-9517.
  11. ^ Lee, Eo Jin; Lee, Jong Won; Lee, Joongwon; Min, Hyung-Ki; Yi, Jongheop; Song, In Kyu; Kim, Do Heui (2018-06-01). "Ag-(Mo-W)/ZrO2 catalysts for the production of propylene oxide: Effect of pH in the preparation of ZrO2 support". Catalysis Communications. 111: 80–83. doi:10.1016/j.catcom.2018.04.005. ISSN 1566-7367. S2CID 103189174.
  12. ^ HU patent 209546B, Forstner, Janos; Gal, Lajos & Feher, Pal et al., "Anti-freeze solution for internal combustion engines", published 1994-07-28 
[edit]