Jump to content

Microplastics and human health

From Wikipedia, the free encyclopedia
Humans are exposed to toxic chemicals and microplastics at all stages in the plastics life cycle

Microplastics effects on human health are of growing concern and an area of research. The tiny particles known as microplastics (MPs), have been found in various environmental and biological matrices, including air, water, food, and human tissues. Microplastics, defined as plastic fragments smaller than 5 mm, and even smaller particles such as nanoplastics (NP), particles smaller than 1000 nm in diameter (0.001 mm or 1 μm), have raised concerns impacting human health.[1][2] The pervasive presence of plastics in our environment has raised concerns about their long-term impacts on human health. While visible pollution caused by larger plastic items is well-documented, the hidden threat posed by nanoplastics remains under-explored. These particles originate from the degradation of larger plastics and are now found in various environmental matrices, including water, soil, and air. Given their minute size, nanoplastics can penetrate biological barriers and accumulate in human tissues, potentially leading to adverse health effects.[3][4]

Plastics continue to accumulate in landfills and oceans, leading to pollution that negatively impacts both human and animal health. Notably, microplastics and nanoplastics are now ubiquitous, infiltrating our food chain and water supplies. Studies indicate that humans ingest significant amounts of microplastics daily through food, especially seafood[5] and inhalation, with estimates ranging from 39,000 to 52,000 particles per person annually[6] Additionally, the presence of microplastics in human feces suggests widespread exposure and absorption.[7] In scientific literature, combined microplastics and nanoplastics are referred to as MNPs or NMPs, or NMPPs for nano-and microplastic particles.

Understanding the sources and health effects of nanoplastics is crucial for developing effective public health policies. As plastics are an integral part of modern life, balancing their benefits with the associated health risks is essential. This research aims to provide evidence-based recommendations to mitigate the adverse health effects of nanoplastics, thereby informing future regulatory and policy decisions. The increasing presence of nanoplastics in the environment has raised concerns about their potential impacts on human health. Research has shown that nanoplastics can penetrate biological barriers, induce toxicity, and accumulate in organs, leading to various health issues [8]. Nanoplastics have been found in drinking water, food, and air, making human exposure ubiquitous[9].

Routes of exposure and bioaccumulation

[edit]

The major pathways of human exposure to micro- and nanoplastics (MNPs) are ingestion, inhalation, and dermal contact, with bioaccumulation varying based on particle size, composition, and physicochemical characteristics. Research suggests that MNPs above 150 μm typically remain confined to tissues and do not enter systemic circulation, whereas particles below 200 nm can breach cellular and tissue barriers, potentially reaching the bloodstream and other organs.[10][11][12][13] This diversity in bioaccumulation pathways underscores the widespread yet nuanced risks of MNP exposure to human health.

Ingestion

[edit]

Ingestion is one of the primary pathways of MNP exposure due to the omnipresence of these particles in food, beverages, and drinking water. Studies show that MNPs are detected in a variety of consumables, including drinking water, [14] [15] beer,[16] honey, sugar,[17] table salt,[18][19] and even airborne particles that settle on food.[20][21][22][13] Indirect ingestion includes toothpaste, face wash, scrubs, [23][24] and soap [25][26]and enter systemic circulation.

Marine products are particularly concerning sources of ingestion-related exposure due to the accumulation of MNPs in aquatic environments. Fish, bivalves, and other seafood are frequently contaminated with MNPs ingested through water and food, and humans consuming these animals are thus directly exposed to microplastic particles embedded in tissue. The entire soft tissue of bivalves, for instance, is eaten by humans, which increases the direct transfer of MNPs. In a study along the Mediterranean coast of Turkey, 1,822 microplastic particles were extracted from the stomachs and intestines of 1,337 fish specimens, with fibers accounting for 70% of these particles.[13]

Contamination is further compounded by plastic packaging and storage materials, which can leach MNPs over time, leading to additional ingestion from common foods and drinks.[10][27] Fecal sample analyses estimate a daily intake of approximately 203–332 MNP particles, translating to an annual ingestion rate of around 39,000–52,000 particles.[6][28] This suggests that daily MNP exposure from food and drink may be substantial, with significant implications for gastrointestinal and systemic health.

Maternal exposure

[edit]

Maternal transfer of MNPs represents an emerging exposure route that affects infants directly. Recent studies have shown the presence of microplastics in breast milk, often leading to exposures in very young children. While it has already been established that chemicals [29] such as flame retardants [30][31][32]and pesticides [33]have been detected in breast milk, knowledge about microplastics is limited in comparison. A 2022 study [34] detected microplastic particles smaller than five millimeters in 75% of analyzed breast milk samples, raising concerns about infant exposure during critical developmental windows.[35][36]

Exposure during developmental stages can lead to long lasting developmental defects or other issues later in life. While these detected levels were not above the currently established thresholds for unsafe levels, they show another possible route for microplastic ingestion. For some native population in north Canada and people who live near industrial factories, it is sometimes suggested by pediatricians that mothers not nurse their children, [37]over fear of ingestion of microplastics and other potentially harmful chemicals. It has been suggested that mothers should directly breast feed their children instead of from a bottle. Studies have shown that pumping milk, freezing it in plastic bags, then subsequently heating it up will increase the contamination of microplastics in the milk. [38] Similar results have been seen from heating plastic reusable food containers in a microwave, showing the release of both microplastics and nanoplastics. [39]It has been suggested that mothers try to avoid ingesting microplastics themselves, to try and avoid passing them onto their children through breastfeeding. Studies have shown that drinking water from plastic bottles has significantly greater detectable plastic content than tap water.[40]

These findings suggest that breastfeeding may inadvertently expose infants to endocrine-disrupting plastics, which could have lasting effects on growth and development. To mitigate these risks, pediatricians recommend reducing the use of plastic bottles and avoiding the heating or freezing of breast milk in plastic containers, as temperature fluctuations can increase MNP leaching.

Dermal contact

[edit]

Though less frequently examined, dermal exposure to MNPs occurs through contact with contaminated media like soil, water, and personal care products, including facial and body scrubs containing MNPs as exfoliants.[41][42][13] Although the skin generally acts as a barrier, conditions such as skin lesions or high exposure environments may allow for enhanced absorption of MNPs, particularly nanoparticles, which can penetrate the stratum corneum. Studies on dermal exposure highlight the potential for these particles to enter systemic circulation, especially if the skin barrier is disrupted by wounds or conditions that increase permeability, like pores such as sweat glands and hair follicles [10]

Inhalation

[edit]

Inhalation is a critical but understudied route of MNP exposure, with airborne MNPs originating from urban dust, synthetic fibers from textiles, rubber tires, and household plastic items.[43][10] These airborne particles may become suspended in the air due to wave action in aquatic environments or the spread of wastewater treatment sludge on agricultural fields.[13] Once inhaled, these particles may lodge in the lungs or, through mucociliary clearance, be ingested and enter the digestive system.[44][20][21][45] Airborne microplastics have been detected in urban atmospheres, with reports showing a fallout of 29–280 particles per square meter per day on an urban rooftop, underscoring the potential for routine exposure.[4] Annual inhalation exposure rates are estimated at around 39,000–52,000 microplastic particles, with studies highlighting the significant contributions from synthetic textiles and urban dust sources.[6]

These findings collectively suggest that MNPs may accumulate in multiple organ systems depending on the exposure route, potentially leading to long-term health consequences as their presence in human tissues becomes more pervasive over time.

Occupational exposure

[edit]

Incidental generation of MNPs is mechanical or environmental degradation or industrial processes such as plastic manufacturing (heating and chemical condensation) and intentional generation of MNPs occur during 3D printing.

The main route of workplace exposure is acute inhalation.[45] Workplace exposure can be high concentration and lasting the duration of a shift and thus short-term whereas exposure outside of work is at low concentration and long-term.[46] The concentration of worker exposure is orders of magnitude higher than the general population (e.g., 4×1010 particles per m3 from extrusion 3D printers[47] versus 50 particles per m3 in the general environment[48]).

High chronic exposure to aerosolized MNPs occur in: the synthetic textile industry, the flocking industry, and the plastics industry consisting of the Vinyl Chloride supplier and the Polyvinyl Chloride manufacturer.[49]

Manufacturing and processing of plastic

[edit]
  • 3D printing. Additive Manufacturing such as commercial extrusion printing and multi-jet fusion printing with thermoplastics and resin emit MNPs and organic vapors (Volatile Organic Compounds) into the ambient workplace air.[47] There is emerging evidence of allergic, respiratory, and cardiovascular adverse effects from 3D printing.[50] For extrusion printing Acrylonitrile butadiene styrene (ABS) filaments emit more MNPs than Polylactic acid (PLA) filaments.[51]
  • Nylon flocking is the process of applying, cutting, sanding and machining of nylon polymers on surfaces where dust emission peaks during air blowing flocked surfaces.[52]
  • Coating utensils and cookware: polytetrafluoroethylene, and high energy or heat processing of plastic products (Bello et al. 2010; Walter et al. 2015).
  • Dust generation occurs in a wide range of settings from composite material machining,[53] drilling,[54] hand-held grinding,[55] and sanding of nanotube-containing composites,[56] and sanding of dental composites,[57] and cutting PVC piping and plastics.[58]
  • PVC and plastic production produces PVC dust[59][60] with mortality confirmed among vinyl and polyvinyl chloride workers after reanalysis of data[61] and coronary artery disease and cancer death among vinyl chloride exposed workers[62]
  • Rubber chemical manufacturing impacting mortality among these workers.[63]

Environmental and mechanical degradation of plastic

[edit]
  • Carpet and synthetic fibers: indoor air contains high concentrations of degraded synthetic fibers with potential exposure to office workers and custodial staff; settled dust is ingested by adults, and particularly children.[48]
  • Wastewater management, recycling facilities, and landfills: plastic goods undergo environmental (weathering) and mechanical degradation and wastewater management[64][65][66] and recycling facilities[67][68] and landfills[69] serve as a reservoirs of particulates workers may potentially be exposed to.

Medical plastic

[edit]
  • Face masks and respirators: globally up to 7 billion facemasks which amounts to 21,000 tons of synthetic polymer, were estimated to be used daily during the COVID-19 pandemic[70] increasing plastic demand and waste.[71] It is yet unknown if respirable NMP debris on the surface of facemasks poses adverse health effects.[72]
  • Medical plastics include a wide range of products from bags to pharmaceutical containers that leach and expose patients and healthcare workers to MNPs.[73] Further research is needed to assess toxicology and medical significance of MNPs from medical plastics.
Microplastics per square meter in the EU sewage sludge (2015–2019)[74]

Potential health risks

[edit]
One of many routes humans are exposed to microplastics is via dermal contact which allows MPs penetration through skin pores[75]

The potential health impacts of microplastics vary based on factors, such as their particle sizes, shape, exposure time, chemical composition (enriched with heavy metals, polycyclic aromatic hydrocarbons (PAHs), etc.), surface properties, and associated contaminants.[76][77]

Experimental and observational studies in mammals have shown that microplastics and nanoplastics exposure have the following adverse effects:

On the cellular level

[edit]

By systems

[edit]

Epidemiological studies

[edit]

Despite growing concern and evidence, most epidemiologic studies have focused on characterizing exposures. Epidemiological studies directly linking microplastics to adverse health effects in humans remain yet limited and research is ongoing to determine the full extent of potential harm caused by microplastics and their long-term impact on human health.[91][92]

Prevalence

[edit]

Microplastics have been found in blood.[93]

Mitigating inhalation exposure to MNPs

[edit]
See also: Health and safety hazards of nanomaterials

As April 2024, there is no established NIOSH Recommended Exposure Limit (REL) for MNPs due to limited data on exposure levels to adverse health effects, the absence of standardization to characterize the heterogeneity of MNPs by chemical composition and morphology, and difficulty in measuring airborne MNPs.[94][95] And thus, safety measures focus on the hierarchy of controls for nanomaterials with good industrial hygiene to implement source emission control with local exhaust ventilation, air filtration, and nonventilating engineering controls such as substitution with less hazardous materials, administrative controls, Personal Protective Equipment (PPE) for skin and respiratory protection.[96]

Research from the U.S. National Institute of Occupational Safety and Health (NIOSH) Nanotechnology Research Center (NTRC) show local exhaust ventilation and High Efficiency Particulate Air (HEPA) filtration to be effective mitigation to theoretically filter 99.97% of nanoparticles down to 0.3 microns.[96]

See also

[edit]

References

[edit]
  1. ^ Amobonye, Ayodeji; Bhagwat, Prashant; Raveendran, Sindhu; Singh, Suren; Pillai, Santhosh (2021-12-15). "Environmental Impacts of Microplastics and Nanoplastics: A Current Overview". Frontiers in Microbiology. 12: 768297. doi:10.3389/fmicb.2021.768297. ISSN 1664-302X. PMC 8714882. PMID 34975796.
  2. ^ Vethaak, A. D., & Legler, J. (2021). Microplastics and human health. Science, 371(6530), 672-674.
  3. ^ Jeong, B., Baek, J. Y., Koo, J., Park, S., Ryu, Y., Kim, K., ... & Lee, D. Y. (2022). Maternal exposure to polystyrene nanoplastics causes brain abnormalities in progeny. Journal of Hazardous Materials, 426, 127815. https://doi.org/10.1016/j.jhazmat.2021.127815
  4. ^ a b Prüst, M., Meijer, J., & Westerink, R. H. (2020). The plastic brain: neurotoxicity of micro-and nanoplastics. Particle and Fibre Toxicology, 17, 1-16.
  5. ^ Smith, Madeleine; Love, David C.; Rochman, Chelsea M.; Neff, Roni A. (2018-08-16). "Microplastics in Seafood and the Implications for Human Health". Current Environmental Health Reports. 5 (3): 375. doi:10.1007/s40572-018-0206-z. PMC 6132564. PMID 30116998.
  6. ^ a b c Cox, K. D., Davis, A., & Muir, D. (2019). Microplastics in the environment: A review of the evidence and potential impacts on human health. Environmental Research Letters, 14(12), 123045. https://doi.org/10.1088/1748-9326/ab5a60
  7. ^ Schwabl, P., Köppel, S., Königshofer, P., Bucsics, T., Trauner, M., Reiberger, T., & Liebmann, B. (2019). Detection of various microplastics in human stool: a prospective case series. Annals of internal medicine, 171(7), 453-457.
  8. ^ Shan, S., Zhang, Y., Zhao, H., Zeng, T., & Zhao, X. (2022). Polystyrene nanoplastics penetrate across the blood-brain barrier and induce activation of microglia in the brain of mice. Chemosphere, 298, 134261. https://doi.org/10.1016/j.chemosphere.2022.134261
  9. ^ Cox, K. D., Covernton, G. A., Davies, H. L., Dower, J. F., Juanes, F., & Dudas, S. E. (2019). Human consumption of microplastics. Environmental Science & Technology, 53(12), 7068-7074.
  10. ^ a b c d Yee, Maxine Swee-Li; Hii, Ling-Wei; Looi, Chin King; Lim, Wei-Meng; Wong, Shew-Fung; Kok, Yih-Yih; Tan, Boon-Keat; Wong, Chiew-Yen; Leong, Chee-Onn (2021-02-16). "Impact of Microplastics and Nanoplastics on Human Health". Nanomaterials. 11 (2): 496. doi:10.3390/nano11020496. ISSN 2079-4991. PMC 7920297. PMID 33669327.
  11. ^ "Microplastics in drinking-water". www.who.int. Retrieved 2024-04-24.
  12. ^ Liang, Boxuan; Zhong, Yizhou; Huang, Yuji; Lin, Xi; Liu, Jun; Lin, Li; Hu, Manjiang; Jiang, Junying; Dai, Mingzhu; Wang, Bo; Zhang, Bingli; Meng, Hao; Lelaka, Jesse Justin J.; Sui, Haixia; Yang, Xingfen (2021-06-07). "Underestimated health risks: polystyrene micro- and nanoplastics jointly induce intestinal barrier dysfunction by ROS-mediated epithelial cell apoptosis". Particle and Fibre Toxicology. 18 (1): 20. Bibcode:2021PFTox..18...20L. doi:10.1186/s12989-021-00414-1. ISSN 1743-8977. PMC 8186235. PMID 34098985.
  13. ^ a b c d e Revel, M., Châtel, A., & Mouneyrac, C. (2018). Micro (nano) plastics: a threat to human health?. Current Opinion in Environmental Science & Health, 1, 17-23.
  14. ^ "World Health Organization (WHO). Information sheet: Microplastics in drinking-water". World Health Organization (WHO). Information sheet: Microplastics in drinking-water.
  15. ^ Mintenig, S.M.; Löder, M.G.J.; Primpke, S.; Gerdts, G. (January 2019). "Low numbers of microplastics detected in drinking water from ground water sources". Science of the Total Environment. 648: 631–635. Bibcode:2019ScTEn.648..631M. doi:10.1016/j.scitotenv.2018.08.178. hdl:1874/377880. ISSN 0048-9697. PMID 30121540.
  16. ^ Liebezeit, Gerd; Liebezeit, Elisabeth (2014-09-02). "Synthetic particles as contaminants in German beers". Food Additives & Contaminants: Part A. 31 (9): 1574–1578. doi:10.1080/19440049.2014.945099. ISSN 1944-0049. PMID 25056358.
  17. ^ Liebezeit, Gerd; Liebezeit, Elisabeth (December 2013). "Non-pollen particulates in honey and sugar". Food Additives & Contaminants: Part A. 30 (12): 2136–2140. doi:10.1080/19440049.2013.843025. ISSN 1944-0049. PMID 24160778.
  18. ^ Yang, Dongqi; Shi, Huahong; Li, Lan; Li, Jiana; Jabeen, Khalida; Kolandhasamy, Prabhu (2015-11-17). "Microplastic Pollution in Table Salts from China". Environmental Science & Technology. 49 (22): 13622–13627. Bibcode:2015EnST...4913622Y. doi:10.1021/acs.est.5b03163. ISSN 0013-936X. PMID 26486565.
  19. ^ Iñiguez, Maria E.; Conesa, Juan A.; Fullana, Andres (2017-08-17). "Microplastics in Spanish Table Salt". Scientific Reports. 7 (1): 8620. Bibcode:2017NatSR...7.8620I. doi:10.1038/s41598-017-09128-x. ISSN 2045-2322. PMC 5561224. PMID 28819264.
  20. ^ a b Enyoh, Christian Ebere; Verla, Andrew Wirnkor; Verla, Evelyn Ngozi; Ibe, Francis Chizoruo; Amaobi, Collins Emeka (November 2019). "Airborne microplastics: a review study on method for analysis, occurrence, movement and risks". Environmental Monitoring and Assessment. 191 (11): 668. Bibcode:2019EMnAs.191..668E. doi:10.1007/s10661-019-7842-0. ISSN 0167-6369. PMID 31650348.
  21. ^ a b Enyoh, Christian Ebere; Verla, Andrew Wirnkor; Verla, Evelyn Ngozi; Ibe, Francis Chizoruo; Amaobi, Collins Emeka (2019-10-24). "Airborne microplastics: a review study on method for analysis, occurrence, movement and risks". Environmental Monitoring and Assessment. 191 (11): 668. Bibcode:2019EMnAs.191..668E. doi:10.1007/s10661-019-7842-0. ISSN 1573-2959. PMID 31650348.
  22. ^ Catarino, Ana I.; Macchia, Valeria; Sanderson, William G.; Thompson, Richard C.; Henry, Theodore B. (June 2018). "Low levels of microplastics (MP) in wild mussels indicate that MP ingestion by humans is minimal compared to exposure via household fibres fallout during a meal". Environmental Pollution. 237: 675–684. Bibcode:2018EPoll.237..675C. doi:10.1016/j.envpol.2018.02.069. hdl:10026.1/11254. PMID 29604577.
  23. ^ Kau, B. (2018). "For the first time, study confirms presence of microplastics in Indian cosmetics". downtoearth.org.
  24. ^ Leslie, HA (2014). "Review of microplastics in cosmetics". IVM Institute for Environmental Studies. 476: 1–33.
  25. ^ "Plastic Cosmetics: Are We Polluting the Environment Through our Personal Care?". United Nations Environment Programme.
  26. ^ Anderson, A.G.; Grose, J.; Pahl, S.; Thompson, R.C.; Wyles, K.J. (15 December 2016). "Microplastics in personal care products: Exploring perceptions of environmentalists, beauticians and students". Marine Pollution Bulletin. 113 (1–2): 454–460. Bibcode:2016MarPB.113..454A. doi:10.1016/j.marpolbul.2016.10.048. hdl:10026.1/8172. ISSN 0025-326X. PMID 27836135.
  27. ^ Aslam, S., Khurram, A., Hussain, R., Qadir, A., & Ahmad, S. R. (2023). Sources, distribution, and incipient threats of polymeric microplastic released from food storage plastic materials. Environmental Monitoring and Assessment, 195(6), 638.
  28. ^ Zhang, S., Wang, J., Yan, P., Hao, X., Xu, B., Wang, W., & Aurangzeib, M. (2021). Non-biodegradable microplastics in soils: a brief review and challenge. Journal of Hazardous Materials, 409, 124525.
  29. ^ Calabrese, Edward J. (March 1992). "Human Breast Milk Contamination in the United States and Canada by Chlorinated Hydrocarbon Insecticides and Industrial Pollutants: Current Status". Journal of the American College of Toxicology. 1 (3): 91–98. doi:10.3109/10915818209018020. ISSN 0730-0913.
  30. ^ Ryan, John Jake; Rawn, Dorothea F.K. (September 2014). "The brominated flame retardants, PBDEs and HBCD, in Canadian human milk samples collected from 1992 to 2005; concentrations and trends". Environment International. 70: 1–8. Bibcode:2014EnInt..70....1R. doi:10.1016/j.envint.2014.04.020. ISSN 0160-4120. PMID 24879366.
  31. ^ Brilliant, LawrenceB.; Van Amburg, George; Isbister, John; Humphrey, Harold; Wilcox, Kenneth; Eyster, Janet; Bloomer, ArthurW.; Price, Harold (September 1978). "Breast-Milk Monitoring to Measure Michigan's Contamination with Polybrominated Biphenyls". The Lancet. 312 (8091): 643–646. doi:10.1016/s0140-6736(78)92758-7. hdl:2027.42/22528. ISSN 0140-6736. PMID 80575.
  32. ^ Norén, Koidu; Meironyté, Daiva (May 2000). "Certain organochlorine and organobromine contaminants in Swedish human milk in perspective of past 20–30 years". Chemosphere. 40 (9–11): 1111–1123. Bibcode:2000Chmsp..40.1111N. doi:10.1016/s0045-6535(99)00360-4. ISSN 0045-6535. PMID 10739053.
  33. ^ Mead, M. Nathaniel (October 2008). "Contaminants in human milk: weighing the risks against the benefits of breastfeeding". Environmental Health Perspectives. 116 (10): A427–434. doi:10.1289/ehp.116-a426. ISSN 0091-6765. PMC 2569122. PMID 18941560.
  34. ^ Ragusa, Antonio; Notarstefano, Valentina; Svelato, Alessandro; Belloni, Alessia; Gioacchini, Giorgia; Blondeel, Christine; Zucchelli, Emma; De Luca, Caterina; D'Avino, Sara; Gulotta, Alessandra; Carnevali, Oliana; Giorgini, Elisabetta (January 2022). "Raman Microspectroscopy Detection and Characterisation of Microplastics in Human Breastmilk". Polymers. 14 (13): 2700. doi:10.3390/polym14132700. ISSN 2073-4360. PMC 9269371. PMID 35808745.
  35. ^ Santoro, A., Marino, M., Vandenberg, L. N., Szychlinska, M. A., Lamparelli, E. P., Scalia, F., ... & Meccariello, R. (2024). PLASTAMINATION: Outcomes on the Central Nervous System and Reproduction. Current Neuropharmacology, 22(11), 1870-1898.
  36. ^ Kopatz, V., Wen, K., Kovács, T., Keimowitz, A. S., Pichler, V., Widder, J., ... & Kenner, L. (2023). Micro-and nanoplastics breach the blood–brain barrier (BBB): Biomolecular corona's role revealed. Nanomaterials, 13(8), 1404.
  37. ^ "Microplastics have been found in breast milk. Will that hurt my baby?". Washington Post. 2024-02-01. ISSN 0190-8286. Retrieved 2024-05-06.
  38. ^ Chen, Yalin; Xu, Haiyin; Luo, Yuanling; Ding, Yuting; Huang, Junguo; Wu, Honghui; Han, Jianing; Du, Linjing; Kang, Anqi; Jia, Meiying; Xiong, Weiping; Yang, Zhaohui (August 2023). "Plastic bottles for chilled carbonated beverages as a source of microplastics and nanoplastics". Water Research. 242: 120243. Bibcode:2023WatRe.24220243C. doi:10.1016/j.watres.2023.120243. ISSN 0043-1354. PMID 37354839.
  39. ^ Hussain, Kazi Albab; Romanova, Svetlana; Okur, Ilhami; Zhang, Dong; Kuebler, Jesse; Huang, Xi; Wang, Bing; Fernandez-Ballester, Lucia; Lu, Yongfeng; Schubert, Mathias; Li, Yusong (2023-07-04). "Assessing the Release of Microplastics and Nanoplastics from Plastic Containers and Reusable Food Pouches: Implications for Human Health". Environmental Science & Technology. 57 (26): 9782–9792. Bibcode:2023EnST...57.9782H. doi:10.1021/acs.est.3c01942. ISSN 0013-936X. PMID 37343248.
  40. ^ Mason, Sherri A.; Welch, Victoria G.; Neratko, Joseph (2018). "Synthetic Polymer Contamination in Bottled Water". Frontiers in Chemistry. 6: 407. Bibcode:2018FrCh....6..407M. doi:10.3389/fchem.2018.00407. ISSN 2296-2646. PMC 6141690. PMID 30255015.
  41. ^ Allen, Steve; Allen, Deonie; Phoenix, Vernon R.; Le Roux, Gaël; Durántez Jiménez, Pilar; Simonneau, Anaëlle; Binet, Stéphane; Galop, Didier (May 2019). "Atmospheric transport and deposition of microplastics in a remote mountain catchment". Nature Geoscience. 12 (5): 339–344. Bibcode:2019NatGe..12..339A. doi:10.1038/s41561-019-0335-5. ISSN 1752-0908.
  42. ^ Dris, Rachid; Gasperi, Johnny; Saad, Mohamed; Mirande, Cécile; Tassin, Bruno (March 2016). "Synthetic fibers in atmospheric fallout: A source of microplastics in the environment?". Marine Pollution Bulletin. 104 (1–2): 290–293. Bibcode:2016MarPB.104..290D. doi:10.1016/j.marpolbul.2016.01.006. PMID 26787549.
  43. ^ Facciolà, Alessio; Visalli, Giuseppa; Pruiti Ciarello, Marianna; Di Pietro, Angela (2021-03-15). "Newly Emerging Airborne Pollutants: Current Knowledge of Health Impact of Micro and Nanoplastics". International Journal of Environmental Research and Public Health. 18 (6): 2997. doi:10.3390/ijerph18062997. ISSN 1660-4601. PMC 7998604. PMID 33803962.
  44. ^ Enyoh Christian Ebere; Verla, Andrew Wirnkor (5 June 2019). We are breathing Plastic; Don't Just Look down, Look up. 3rd IMSU World Environment Day International Conference. doi:10.13140/RG.2.2.21027.91680.
  45. ^ a b Murashov, Vladimir; Geraci, Charles L.; Schulte, Paul A.; Howard, John (2021-11-02). "Nano- and microplastics in the workplace". Journal of Occupational and Environmental Hygiene. 18 (10–11): 489–494. doi:10.1080/15459624.2021.1976413. ISSN 1545-9624. PMC 10020928. PMID 34478348.
  46. ^ "Exposome and Exposomics". www.cdc.gov/niosh. June 1, 2021. Archived from the original on September 9, 2023. Retrieved June 1, 2021.
  47. ^ a b Stefaniak, A.B.; Johnson, A.R.; du Preez, S.; Hammond, D.R.; Wells, J.R.; Ham, J.E.; LeBouf, R.F.; Martin, S.B.; Duling, M.G.; Bowers, L.N.; Knepp, A.K.; de Beer, D.J.; du Plessis, J.L. (June 2019). "Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines". Safety and Health at Work. 10 (2): 229–236. doi:10.1016/j.shaw.2018.10.003. PMC 6598813. PMID 31297287.
  48. ^ a b Dris, Rachid; Gasperi, Johnny; Mirande, Cécile; Mandin, Corinne; Guerrouache, Mohamed; Langlois, Valérie; Tassin, Bruno (February 2017). "A first overview of textile fibers, including microplastics, in indoor and outdoor environments". Environmental Pollution. 221: 453–458. Bibcode:2017EPoll.221..453D. doi:10.1016/j.envpol.2016.12.013. ISSN 0269-7491. PMID 27989388.
  49. ^ Prata, Joana Correia (2018-03-01). "Airborne microplastics: Consequences to human health?". Environmental Pollution. 234: 115–126. Bibcode:2018EPoll.234..115P. doi:10.1016/j.envpol.2017.11.043. ISSN 0269-7491. PMID 29172041.
  50. ^ Chan, F. L.; House, R.; Kudla, I.; Lipszyc, J. C.; Rajaram, N.; Tarlo, S. M. (2018). "Health survey of employees regularly using 3D printers". Occupational Medicine. 68 (3): 211–214. doi:10.1093/occmed/kqy042. PMID 29538712. Retrieved 2024-04-20.
  51. ^ Azimi, Parham; Zhao, Dan; Pouzet, Claire; Crain, Neil E.; Stephens, Brent (2016-02-02). "Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments". Environmental Science & Technology. 50 (3): 1260–1268. Bibcode:2016EnST...50.1260A. doi:10.1021/acs.est.5b04983. ISSN 0013-936X. PMID 26741485.
  52. ^ Joseph Burkhart, Chris Piacitelli (1999-04-15). "Environmental Study of Nylon Flocking Process". Journal of Toxicology and Environmental Health, Part A. 57 (1): 1–23. Bibcode:1999JTEHA..57....1J. doi:10.1080/009841099157836. ISSN 1528-7394. PMID 10321899.
  53. ^ Ding, Yaobo; Wohlleben, Wendel; Boland, Mael; Vilsmeier, Klaus; Riediker, Michael (2017-11-10). "Nano-object Release During Machining of Polymer-Based Nanocomposites Depends on Process Factors and the Type of Nanofiller". Annals of Work Exposures and Health. 61 (9): 1132–1144. doi:10.1093/annweh/wxx081. ISSN 2398-7308. PMID 29136418.
  54. ^ Starost, Kristof; Njuguna, James (2014-08-22). "A review on the effect of mechanical drilling on polymer nanocomposites". IOP Conference Series: Materials Science and Engineering. 64 (1): 012031. Bibcode:2014MS&E...64a2031S. doi:10.1088/1757-899X/64/1/012031. hdl:10059/1104. ISSN 1757-8981.
  55. ^ Zimmer, A. T.; Maynard, A. D. (November 2002). "Investigation of the Aerosols Produced by a High-speed, Hand-held Grinder Using Various Substrates". The Annals of Occupational Hygiene. 46 (8): 663–672. doi:10.1093/annhyg/mef089. ISSN 1475-3162. PMID 12406860.
  56. ^ Kang, J.; Erdely, A.; Afshari, A.; Casuccio, G.; Bunker, K.; Lersch, T.; Dahm, M. M.; Farcas, D.; Cena, L. (2017-01-01). "Generation and characterization of aerosols released from sanding composite nanomaterials containing carbon nanotubes". NanoImpact. 5: 41–50. Bibcode:2017NanoI...5...41K. doi:10.1016/j.impact.2016.12.006. ISSN 2452-0748.
  57. ^ Shin, Nara; Drapcho, Jessica; Aich, Nirupam; Guha, Upoma; Tsai, Candace Su-Jung (November 2020). "Quantification and characterization of nanometer-sized particles released from dental composite products using a multimodal approach". Journal of Nanoparticle Research. 22 (11): 345. Bibcode:2020JNR....22..345S. doi:10.1007/s11051-020-05078-0. ISSN 1388-0764.
  58. ^ Luo, Yunlong; Al Amin, Md; Gibson, Christopher T.; Chuah, Clarence; Tang, Youhong; Naidu, Ravi; Fang, Cheng (April 2022). "Raman imaging of microplastics and nanoplastics generated by cutting PVC pipe". Environmental Pollution. 298: 118857. Bibcode:2022EPoll.29818857L. doi:10.1016/j.envpol.2022.118857. PMID 35033619.
  59. ^ a b Soutar, C A; Copland, L H; Thornley, P E; Hurley, J F; Ottery, J; Adams, W G; Bennett, B (1980-09-01). "Epidemiological study of respiratory disease in workers exposed to polyvinylchloride dust". Thorax. 35 (9): 644–652. doi:10.1136/thx.35.9.644. ISSN 0040-6376. PMC 471355. PMID 7444838.
  60. ^ Mastrangelo, G; Saia, B; Marcer, G; Piazza, G (October 1981). "Epidemiological study of pneumoconiosis in the Italian poly(vinyl chloride) industry". Environmental Health Perspectives. 41: 153–157. doi:10.1289/ehp.8141153. ISSN 0091-6765. PMC 1568843. PMID 7333233.
  61. ^ Gennaro, Valerio; Ceppi, Marcello; Crosignani, Paolo; Montanaro, Fabio (December 2008). "Reanalysis of updated mortality among vinyl and polyvinyl chloride workers: Confirmation of historical evidence and new findings". BMC Public Health. 8 (1): 21. doi:10.1186/1471-2458-8-21. ISSN 1471-2458. PMC 2262888. PMID 18211695.
  62. ^ a b Carreón, Tania; Hein, Misty J.; Hanley, Kevin W.; Viet, Susan M.; Ruder, Avima M. (April 2014). "Coronary artery disease and cancer mortality in a cohort of workers exposed to vinyl chloride, carbon disulfide, rotating shift work, and o -toluidine at a chemical manufacturing plant". American Journal of Industrial Medicine. 57 (4): 398–411. doi:10.1002/ajim.22299. ISSN 0271-3586. PMC 4512282. PMID 24464642.
  63. ^ Prince, Mary M.; Ward, Elizabeth M.; Ruder, Avima M.; Salvan, Alberto; Roberts, Dennis R. (June 2000). "Mortality among rubber chemical manufacturing workers". American Journal of Industrial Medicine. 37 (6): 590–598. doi:10.1002/(SICI)1097-0274(200006)37:6<590::AID-AJIM3>3.0.CO;2-8. ISSN 0271-3586. PMID 10797502.
  64. ^ Gatidou, Georgia; Arvaniti, Olga S.; Stasinakis, Athanasios S. (April 2019). "Review on the occurrence and fate of microplastics in Sewage Treatment Plants". Journal of Hazardous Materials. 367: 504–512. Bibcode:2019JHzM..367..504G. doi:10.1016/j.jhazmat.2018.12.081. ISSN 0304-3894. PMID 30620926.
  65. ^ Sun, Jing; Dai, Xiaohu; Wang, Qilin; van Loosdrecht, Mark C.M.; Ni, Bing-Jie (April 2019). "Microplastics in wastewater treatment plants: Detection, occurrence and removal". Water Research. 152: 21–37. Bibcode:2019WatRe.152...21S. doi:10.1016/j.watres.2018.12.050. hdl:10072/386077. ISSN 0043-1354. PMID 30660095.
  66. ^ Enfrin, Marie; Dumée, Ludovic F.; Lee, Judy (September 2019). "Nano/microplastics in water and wastewater treatment processes – Origin, impact and potential solutions". Water Research. 161: 621–638. Bibcode:2019WatRe.161..621E. doi:10.1016/j.watres.2019.06.049. ISSN 0043-1354. PMID 31254888.
  67. ^ Suzuki, Go; Uchida, Natsuyo; Tuyen, Le Huu; Tanaka, Kosuke; Matsukami, Hidenori; Kunisue, Tatsuya; Takahashi, Shin; Viet, Pham Hung; Kuramochi, Hidetoshi; Osako, Masahiro (June 2022). "Mechanical recycling of plastic waste as a point source of microplastic pollution". Environmental Pollution. 303: 119114. Bibcode:2022EPoll.30319114S. doi:10.1016/j.envpol.2022.119114. ISSN 0269-7491. PMID 35276247.
  68. ^ Stapleton, Michael J.; Ansari, Ashley J.; Ahmed, Aziz; Hai, Faisal I. (December 2023). "Evaluating the generation of microplastics from an unlikely source: The unintentional consequence of the current plastic recycling process". Science of the Total Environment. 902: 166090. Bibcode:2023ScTEn.90266090S. doi:10.1016/j.scitotenv.2023.166090. ISSN 0048-9697. PMID 37553052.
  69. ^ Facciolà, Alessio; Visalli, Giuseppa; Pruiti Ciarello, Marianna; Di Pietro, Angela (2021-03-15). "Newly Emerging Airborne Pollutants: Current Knowledge of Health Impact of Micro and Nanoplastics". International Journal of Environmental Research and Public Health. 18 (6): 2997. doi:10.3390/ijerph18062997. ISSN 1660-4601. PMC 7998604. PMID 33803962.
  70. ^ Hantoko, Dwi; Li, Xiaodong; Pariatamby, Agamuthu; Yoshikawa, Kunio; Horttanainen, Mika; Yan, Mi (May 2021). "Challenges and practices on waste management and disposal during COVID-19 pandemic". Journal of Environmental Management. 286: 112140. Bibcode:2021JEnvM.28612140H. doi:10.1016/j.jenvman.2021.112140. PMC 7869705. PMID 33652254.
  71. ^ Lau, Winnie W. Y.; Shiran, Yonathan; Bailey, Richard M.; Cook, Ed; Stuchtey, Martin R.; Koskella, Julia; Velis, Costas A.; Godfrey, Linda; Boucher, Julien; Murphy, Margaret B.; Thompson, Richard C.; Jankowska, Emilia; Castillo Castillo, Arturo; Pilditch, Toby D.; Dixon, Ben (2020-09-18). "Evaluating scenarios toward zero plastic pollution". Science. 369 (6510): 1455–1461. Bibcode:2020Sci...369.1455L. doi:10.1126/science.aba9475. hdl:10026.1/16767. ISSN 0036-8075. PMID 32703909.
  72. ^ Han, Jie; He, Shanshan (January 2021). "Need for assessing the inhalation of micro(nano)plastic debris shed from masks, respirators, and home-made face coverings during the COVID-19 pandemic". Environmental Pollution. 268 (Pt B): 115728. Bibcode:2021EPoll.26815728H. doi:10.1016/j.envpol.2020.115728. PMC 7537728. PMID 33065479.
  73. ^ Gopinath, Ponnusamy Manogaran; Parvathi, Venkatachalam Deepa; Yoghalakshmi, Nagarajan; Kumar, Srinivasan Madhan; Athulya, Pazhamthavalathil Anil; Mukherjee, Amitava; Chandrasekaran, Natarajan (September 2022). "Plastic particles in medicine: A systematic review of exposure and effects to human health". Chemosphere. 303 (Pt 3): 135227. Bibcode:2022Chmsp.30335227G. doi:10.1016/j.chemosphere.2022.135227. ISSN 0045-6535. PMID 35671817.
  74. ^ Lofty, J.; Muhawenimana, V.; Wilson, C. A. M. E.; Ouro, P. (2022-07-01). "Microplastics removal from a primary settler tank in a wastewater treatment plant and estimations of contamination onto European agricultural land via sewage sludge recycling". Environmental Pollution. 304: 119198. Bibcode:2022EPoll.30419198L. doi:10.1016/j.envpol.2022.119198. ISSN 0269-7491. PMID 35341817.
  75. ^ a b Enyoh, Christian Ebere; Shafea, Leila; Verla, Andrew Wirnkor; Verla, Evelyn Ngozi; Qingyue, Wang; Chowdhury, Tanzin; Paredes, Marcel (2020-03-31). "Microplastics Exposure Routes and Toxicity Studies to Ecosystems: An Overview". Environmental Analysis, Health and Toxicology. 35 (1): e2020004. doi:10.5620/eaht.e2020004. ISSN 2671-9525. PMC 7308665. PMID 32570999.
  76. ^ Saeed, Mohammad Sadiq; Fahd, Faisal; Khan, Faisal; Chen, Bing; Sadiq, Rehan (2023-10-15). "Human health risk model for microplastic exposure in the Arctic region". Science of the Total Environment. 895: 165150. Bibcode:2023ScTEn.89565150S. doi:10.1016/j.scitotenv.2023.165150. ISSN 0048-9697. PMID 37385486. S2CID 259294427.
  77. ^ a b c Banerjee, Amrita; Shelver, Weilin L. (2021-02-10). "Micro- and nanoplastic induced cellular toxicity in mammals: A review". Science of the Total Environment. 755 (Pt 2): 142518. Bibcode:2021ScTEn.75542518B. doi:10.1016/j.scitotenv.2020.142518. ISSN 0048-9697. PMID 33065507. S2CID 223547902.
  78. ^ a b c Zhao, Bosen; Rehati, Palizhati; Yang, Zhu; Cai, Zongwei; Guo, Caixia; Li, Yanbo (2024-02-20). "The potential toxicity of microplastics on human health". Science of the Total Environment. 912: 168946. Bibcode:2024ScTEn.91268946Z. doi:10.1016/j.scitotenv.2023.168946. ISSN 0048-9697. PMID 38043812. S2CID 265562120.
  79. ^ a b Hirt, Nell; Body-Malapel, Mathilde (2020-11-12). "Immunotoxicity and intestinal effects of nano- and microplastics: a review of the literature". Particle and Fibre Toxicology. 17 (1): 57. Bibcode:2020PFTox..17...57H. doi:10.1186/s12989-020-00387-7. ISSN 1743-8977. PMC 7661204. PMID 33183327.
  80. ^ Hu, Moyan; Palić, Dušan (2020-10-01). "Micro- and nano-plastics activation of oxidative and inflammatory adverse outcome pathways". Redox Biology. 37: 101620. doi:10.1016/j.redox.2020.101620. ISSN 2213-2317. PMC 7767742. PMID 32863185.
  81. ^ a b c Danopoulos, Evangelos; Twiddy, Maureen; West, Robert; Rotchell, Jeanette M. (2022-04-05). "A rapid review and meta-regression analyses of the toxicological impacts of microplastic exposure in human cells". Journal of Hazardous Materials. 427: 127861. Bibcode:2022JHzM..42727861D. doi:10.1016/j.jhazmat.2021.127861. ISSN 0304-3894. PMID 34863566. S2CID 244649738.
  82. ^ a b Tagorti, Ghada; Kaya, Bülent (2022-01-01). "Genotoxic effect of microplastics and COVID-19: The hidden threat". Chemosphere. 286 (Pt 3): 131898. Bibcode:2022Chmsp.28631898T. doi:10.1016/j.chemosphere.2021.131898. ISSN 0045-6535. PMID 34411929.
  83. ^ Roursgaard, Martin; Hezareh Rothmann, Monika; Schulte, Juliane; Karadimou, Ioanna; Marinelli, Elena; Møller, Peter (2022-07-06). "Genotoxicity of Particles From Grinded Plastic Items in Caco-2 and HepG2 Cells". Frontiers in Public Health. 10: 906430. doi:10.3389/fpubh.2022.906430. ISSN 2296-2565. PMC 9298925. PMID 35875006.
  84. ^ Marfella, Raffaele; et al. (2024). "Microplastics and Nanoplastics in Atheromas and Cardiovascular Events". New England Journal of Medicine. 390 (10): 900–910. doi:10.1056/nejmoa2309822. PMC 11009876. PMID 38446676.
  85. ^ a b c d e f g Ullah, Sana; Ahmad, Shahid; Guo, Xinle; Ullah, Saleem; Ullah, Sana; Nabi, Ghulam; Wanghe, Kunyuan (2023-01-16). "A review of the endocrine disrupting effects of micro and nano plastic and their associated chemicals in mammals". Frontiers in Endocrinology. 13: 1084236. doi:10.3389/fendo.2022.1084236. ISSN 1664-2392. PMC 9885170. PMID 36726457.
  86. ^ Molina, Elena; Benedé, Sara (2022-06-28). "Is There Evidence of Health Risks From Exposure to Micro- and Nanoplastics in Foods?". Frontiers in Nutrition. 9: 910094. doi:10.3389/fnut.2022.910094. ISSN 2296-861X. PMC 9274238. PMID 35836585.
  87. ^ Cortés-Arriagada, Diego; Ortega, Daniela E.; Miranda-Rojas, Sebastián (2023-02-15). "Mechanistic insights into the adsorption of endocrine disruptors onto polystyrene microplastics in water". Environmental Pollution. 319: 121017. Bibcode:2023EPoll.31921017C. doi:10.1016/j.envpol.2023.121017. ISSN 0269-7491. PMID 36610654. S2CID 255502169.
  88. ^ Shi, Chunzhen; Han, Xiaohong; Guo, Wei; Wu, Qi; Yang, Xiaoxi; Wang, Yuanyuan; Tang, Gang; Wang, Shunhao; Wang, Ziniu; Liu, Yaquan; Li, Min; Lv, Meilin; Guo, Yunhe; Li, Zikang; Li, Junya (2022-06-01). "Disturbed Gut-Liver axis indicating oral exposure to polystyrene microplastic potentially increases the risk of insulin resistance". Environment International. 164: 107273. Bibcode:2022EnInt.16407273S. doi:10.1016/j.envint.2022.107273. ISSN 0160-4120. PMID 35526298.
  89. ^ "Microplastics May Increase Risk for Obesity". Global Environmental Health Newsletter. Retrieved 2024-02-29.
  90. ^ Matei, Adrienne (2023-04-07). "Plastics touching our food may be making us gain weight". The Guardian. ISSN 0261-3077. Retrieved 2024-02-29.
  91. ^ Lee, Yongjin; Cho, Jaelim; Sohn, Jungwoo; Kim, Changsoo (2023). "Health Effects of Microplastic Exposures: Current Issues and Perspectives in South Korea". Yonsei Medical Journal. 64 (5): 301–308. doi:10.3349/ymj.2023.0048. ISSN 0513-5796. PMC 10151227. PMID 37114632.
  92. ^ Li, Yue; Tao, Le; Wang, Qiong; Wang, Fengbang; Li, Gang; Song, Maoyong (2023-10-20). "Potential Health Impact of Microplastics: A Review of Environmental Distribution, Human Exposure, and Toxic Effects". Environment & Health. 1 (4): 249–257. doi:10.1021/envhealth.3c00052. ISSN 2833-8278. PMC 11504192.
  93. ^ Blackburn K, Green D (March 2022). "The potential effects of microplastics on human health: What is known and what is unknown". Ambio (Review). 51 (3): 518–530. Bibcode:2022Ambio..51..518B. doi:10.1007/s13280-021-01589-9. PMC 8800959. PMID 34185251.
  94. ^ Eberhard, Tiffany; Casillas, Gaston; Zarus, Gregory M.; Barr, Dana Boyd (2024-01-06). "Systematic review of microplastics and nanoplastics in indoor and outdoor air: identifying a framework and data needs for quantifying human inhalation exposures". Journal of Exposure Science & Environmental Epidemiology. 34 (2): 185–196. Bibcode:2024JESEE..34..185E. doi:10.1038/s41370-023-00634-x. ISSN 1559-064X. PMC 11142917. PMID 38184724.
  95. ^ "Are There Nano- and Microplastics in the Workplace?". blogs.cdc.gov/niosh-science-blog. February 19, 2020. Retrieved February 19, 2020.
  96. ^ a b Topmiller1, Dunn2, Jennifer L.1, , Kevin H.2. "Current strategies for engineering controls in nanomaterial production and downstream handling processes" (PDF). DHHS Publication. 102: 9–20.{{cite journal}}: CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link)
Retrieved from "https://en.wikipedia.org/w/index.php?title=Microplastics_and_human_health&oldid=1263080962"