Jump to content

Hispano-Suiza

From Wikipedia, the free encyclopedia
(Redirected from Hispano-Suiza Alphonso)

Hispano Suiza
IndustryManufacturing
FoundedJune 14, 1904
FoundersMarc Birkigt
Damián Mateu
Francisco Seix
FateAviation: now part of Safran
Automobiles: active as part of the Peralada Group
Headquarters
Barcelona
,
Catalonia, Spain
Key people
Miguel Suqué Mateu (President), Sergio Martinez Campos (CEO), Juan Fernandez (CTO), Francesc Arenas (Head of Design), Victor Cobos (CMO)
ProductsAutomobiles, formerly also aviation components
ParentGrup Peralada
Websitehispanosuizacars.com

Hispano-Suiza (Spanish for 'Spanish-Swiss') is a Spanish automotive company. It was founded in 1904 by Marc Birkigt and Damián Mateu [es] as an automobile manufacturer and eventually had several factories in Spain and France that produced luxury cars, aircraft engines, trucks and weapons.

In 1923, its French luxury car arm became a semi-autonomous partnership with the Spanish parent company. In 1946, the parent company sold all of its Spanish automotive assets to Enasa, a Spanish state-owned vehicle manufacturer, and the French arm continued as an independent aviation engine and components manufacturer under the Hispano-Suiza name. In 1968, Hispano-Suiza was taken over by the aerospace company Snecma, which is now part of the French Safran Group. The relaunch of Hispano Suiza Cars has been made by the same founding family (4th generation of the Suqué Mateu Family), the company is part of the Peralada Group (owned as well by the Suqué Mateu family) in 2019 with a fully-electric 1.119 HP hypercar called Hispano-Suiza Carmen.

History

[edit]

Early years

[edit]

In 1898, a Spanish artillery captain, Emilio de la Cuadra Albiol [es], started electric automobile production in Barcelona under the name of La Cuadra. In Paris, Emilio de la Cuadra met the Swiss engineer Marc Birkigt and hired him to work for the company in Spain. Under his direction, two types of La Cuadra gasoline-powered engine cars were started immediately, one equipped with a 4.5 hp single-cylinder explosion engine and another 1.1-litre two-cylinder model, 7.5 hp. In 1900, these two internal combustion engines were the first designed and built in Spain by La Cuadra from a Birkigt design. These cars had four wheels, the previous two directional, clutch mechanisms, 3-speed gearbox, chain drive and suspension by crossbows. Two complete vehicles were completed, and there were some more under construction.[1] At some point in 1902, the ownership changed hands to José María Castro Fernández and became Fábrica Hispano-Suiza de Automóviles (Spanish-Swiss Automobile Factory), but this company went bankrupt in December 1903.

Stock certificate of June 14, 1904

Another restructuring took place in 1904, creating La Hispano-Suiza Fábrica de Automóviles under Castro's direction, also based in Barcelona. Four new engines were introduced in the next year and a half – a 3.8-litre and 7.4-litre four-cylinder and a pair of big six-cylinder engines were produced. This company managed to avoid bankruptcy and its largest operations remained in Barcelona until 1946, where cars, trucks, buses, aero engines and weapons were produced. Other factories in Spain were at Ripoll, Seville, and Guadalajara.

In 1910, Jean Chassagne competed with a Hispano-Suiza together with works drivers Pilleveridier and Zucarelli in the Coupe des Voiturettes Boulogne and the Catalan Cup Races, gaining second and fourth places respectively. France was soon proving to be a larger market for Hispano-Suiza's luxury cars than Spain. In 1911, an assembly factory called Hispano France began operating in the Paris suburb of Levallois-Perret. Production was moved to larger factories at Bois-Colombes, under the name Hispano-Suiza, in 1914 and soon became Hispano-Suiza's main plant for producing the largest, most costly models.

World War I

[edit]
A Brussels museum-preserved Hispano-Suiza HS.8A SOHC aviation engine from World War I

With the start of World War I, Hispano-Suiza turned to the design and production of aircraft engines under the direction of Marc Birkigt. His chief engineer during this period was another Swiss, Louis Massuger. Traditionally, aircraft engines were manufactured by machining separate steel cylinders and then bolting these assemblies directly to the crankcase. Birkigt's novel solution, the Hispano-Suiza 8, called for the engine block to be formed from a single piece of cast aluminum, and into which thin steel liners were secured. Manufacturing an engine in this way simplified construction and resulted in a lighter, yet stronger more durable engine. Thus, Birkigt's new construction method created the first practical examples of what are commonly known today as "cast block" engines. His aluminum cast block V-8 design was also noteworthy for incorporating overhead camshafts, propeller reduction gearing and other desirable features that did not appear together on competitors' engines until the late 1920s.[citation needed] A major design feature added to the later HS.8B line was the use of a hollow propeller shaft for both the 8B and 8C gear-reduction versions, which when used for the HS.8C versions specifically engineered to accommodate one, allowed heavy calibre (usually 37 mm) projectiles to be fired through the hollow propeller shaft, avoiding the need for a synchronization gear, a feature used in future Hispano-Suiza military engines. Hispano-Suiza's aero engines, produced both at its own factories and under license, became the most commonly used aero engines in the French and British air forces, powering over half the alliance's fighter aircraft.[2]

1918–1936

[edit]

After World War I, Hispano-Suiza returned to automobile manufacturing, and in 1919, they introduced the Hispano-Suiza H6. The H6 featured an inline 6-cylinder overhead camshaft engine based on the features of its V8 aluminium World War I aircraft engines and had coachwork done by well known coachbuilders like Hibbard & Darrin and D'Ieteren.[3]

Licences for Hispano-Suiza patents were much in demand from prestige car manufacturers world-wide. Rolls-Royce used a number of Hispano-Suiza patents. For instance, for many years, Rolls-Royce installed Hispano-Suiza designed power brakes in its vehicles.

In 1923, the French arm of Hispano-Suiza was incorporated as the Société Française Hispano-Suiza, the Spanish parent company retaining control with 71% of the share capital. The French subsidiary was granted a large degree of financial and project independence to bring design and production direction into closer contact with its main markets, but overall direction remained at Barcelona. This arrangement increased the importance of the Bois-Colombes plant near Paris as Hispano-Suiza's premier luxury car plant, and while the Spanish operations continued to produce luxury cars (mostly the smaller, less expensive models), production in Spain moved increasingly to the production of buses, trucks and aircraft engines at several plants located around the country.

Through the 1920s and into the 1930s, Hispano-Suiza built a series of luxury cars with overhead camshaft engines of increasing performance. On the other hand, in the 1930s, Hispano-Suiza's V-12 car engines reverted to pushrod valve actuation to reduce engine noise.

During this time, Hispano-Suiza released the 37.2 Hispano-Suiza car built at the Bois-Colombes works.

The stork hood ornament

The hood ornament atop the radiator after World War I was in the form of a stork, the symbol of the French province of Alsace, taken from the squadron emblem painted on the side of a Hispano-Suiza powered fighter aircraft that had been flown by the World War I French ace Georges Guynemer.

The Hispano-Suiza T49 was also designed and made by the Spanish arm of the company between 1924 and 1944; it was the Spanish production version of the H6B model with a 6-cylinder engine of 8,000 cm3, 160 hp and a maximum speed of 177 km / h.[4]

In 1925, Carlos Ballester obtained permission to represent Hispano-Suiza in Argentina. The agreement consisted of a phase in which the chassis were imported, followed by complete domestic production in Argentina. Thus Hispano Argentina Fábrica de Automóviles (HAFDASA) was born, for the production of Hispano-Suiza motors and automobiles, and also the production of spare parts for other car, truck, and bus manufacturers.

Spanish Civil War and WWII

[edit]

After the outbreak of the Spanish Civil War in 1936, the autonomous government of Catalonia, on behalf of the Second Spanish Republic, collectivized control of Hispano-Suiza's Spanish factories and placed the company on a war footing. The company was divided into three sections:

  • aircraft engines and cannons
  • cars and trucks
  • machine tools

Because of the international isolation of the Spanish republic, the Spanish arm of the company suffered from shortages.

In 1937, the French government took control of the French subsidiary of Hispano-Suiza with a 51 per cent share of the capital for the provision of war materiel, renaming the company La Société d’exploitation des matériels Hispano-Suiza. In 1938, the French company ceased automobile production and concentrated on aircraft engine production. At the time, Hispano-Suiza had just introduced a new series of water-cooled V-12 engines and the Hispano-Suiza 12Y was in great demand for practically every type of French aircraft. However, without the Spanish factories, Hispano-Suiza lacked the capacity to deliver enough engines for the rapidly growing French air force, and many new French fighter aircraft remained grounded for the lack of an engine when World War II began.

A development of the era were a series of 20 mm autocannon, first the Hispano-Suiza HS.9, followed by the Hispano-Suiza HS.404. The 404 was licensed for production in Britain and equipped almost all RAF fighter aircraft during the war. Production was also set up in the US, but these versions never matured even though the USAAC and US Navy both wanted to use it in place of their existing .50 BMG weapons. A lesser-known success was the Hispano-Suiza HS.820, a higher performance 20 mm design that was also used in the US as the M139. A variation of the 20 mm guns used on the Lockheed P-38 Lightning aircraft were produced by International Harvester.[5] In 1970 Hispano-Suiza sold their armaments division to Oerlikon, the HS.820 becoming the KAD.

In 1940, Hispano-Suiza, together with the Spanish bank Banco Urquijo and a group of Spanish industrial companies, founded the Sociedad Ibérica de Automóviles de Turismo (S.I.A.T.). This led to Spain's first mass-production car maker, SEAT. After the civil war, Hispano-Suiza in Spain was severely affected by the war-devastated economy and the trade embargoes imposed by the allies. In 1946, Hispano-Suiza sold off its Spanish automotive assets to Enasa, a state owned company belonging to the Instituto Nacional de Industria that produced the Pegaso trucks, buses and, for a while, sport cars.

1950s–present

[edit]
Hispano-Suiza HS21 by Mazel

After the Second World War, the French arm of Hispano-Suiza continued primarily as an independent aerospace firm. Between 1945 and 1955, it was building the Rolls-Royce Nene centrifugal compressor turbojet engine under license, designing landing gear in 1950 and Martin-Baker ejection seats in 1955. The company's attention turned increasingly to turbine manufacturing and, in 1968, it was taken over and became a division of SNECMA. In 1999, Hispano-Suiza moved its turbine operations to a new factory in Bezons, outside Paris, using the original factories for power transmissions and accessory systems for jet engines. In 2005, SNECMA merged with SAGEM to form SAFRAN.

In the early 2000s, Hispano-Suiza returned to the automotive world once more, presenting the HS 21 concept car at the 2000 Geneva Motor Show. Designed by Barcelona based firm Mazel Group Engineering, the mid engine, two seater sports car was based on the Renault Sport Spider and was planned to use a BMW or Mercedes-Benz V12 engine.[6] A second model, a luxury sedan named the Hispano-Suiza K8 was presented the following year.[7] Finally, Mazel presented the Hispano-Suiza HS21 GTS in 2002, with the aim of building a car to compete in the 24 hours of Le Mans.[8] The car did not race, and none of the previous concepts entered production.

The brand saw another attempt at a revival in the automotive sector, presenting a new model, the Hispano-Suiza V10 Supercharged, at the 2010 Geneva Motor Show, through a firm affiliated with designer Erwin Leo Himmel.[9] Designed by Oliver Boulay, the concept car was based on the Audi R8 5.2 and featured a V10 engine tuned by Motoren Technik Mayer (MTM). It was expected to be priced at around EUR700,000, however the planned production never materialised.[10][11]

The official revival of the Hispano-Suiza brand occurred at the 2019 Geneva Motor Show with the debut of the Carmen, an all-electric supercar.[12] This car was presented by the company Hispano Suiza Cars that is associated with the Peralada Group owned by the Suqué Mateu family, descendants of one of Hispano-Suiza's original founders, Damián Mateu [es].[9] The car's design was influenced by the 1938 Hispano-Suiza H6B Dubonnet Xenia.[13]

Hispano-Suiza Carmen on display at the 2019 Geneva Motor Show
[edit]
  • 1912 Hispano-Suiza Alfonso XIII (Spain)
    1912 Hispano-Suiza Alfonso XIII (Spain)
  • 1929 Hispano-Suiza T49 (Spain)
    1929 Hispano-Suiza T49 (Spain)
  • 1934 Hispano-Suiza H6B Million-Guiet Dual-Cowl Phæton (France)
    1934 Hispano-Suiza H6B Million-Guiet Dual-Cowl Phæton (France)
  • Hispano-Suiza J12 (France)
    Hispano-Suiza J12 (France)
  • Hispano-Suiza K6 (France)
    Hispano-Suiza K6 (France)
  • 1935 Hispano-Suiza at the Musée des Arts et Métiers - Paris
    1935 Hispano-Suiza at the Musée des Arts et Métiers - Paris
  • 1936 Hispano-Suiza Pourtout (France)
    1936 Hispano-Suiza Pourtout (France)
  • 1938 Hispano-Suiza H6B Dubonnet Xenia
    1938 Hispano-Suiza H6B Dubonnet Xenia

Cars

[edit]
Model Year N° of cylinders Horsepower (PS) Engine displacement (cc) Brakes Gearbox Maximum speed
10 HP 1904 6 10 ~ ~ ~ ~
14–16 HP 1904 6 From 14 to 16 ~ ~ ~ ~
Armoured type Birkigt 1905 4 20 ~ ~ ~ 87 km/h (54 mph)
20–30 HP 1906 ~ From 20 to 24 ~ ~ ~ 100 km/h (62 mph)
40 HP 1906 ~ 40 ~ ~ ~ 100 km/h (62 mph)
60–75 HP 1907 6 From 60 to 75 ~ ~ ~ ~
12–15 HP 1907 ~ From 12 to 15 ~ ~ ~ ~
20–30 HP 1908 4 From 20 to 30 ~ ~ ~ ~
24–30 HP 1908 4 From 24 to 30 ~ ~ ~ ~
30–40 HP 1908 4 From 30 to 40 ~ ~ ~ ~
Alfonso XIII 1912 4 64 3620 Drum brake in back wheels (front wheels without brakes) Manual transmission, 3 gears and reverse 121 km/h (75 mph)
15–20 HP 1909 4 From 15 to 20 ~ ~ ~ ~
20–30 HP 1909 4 From 20 to 30 ~ ~ ~ ~
T21 1913–14 ~ From 15 to 30 ~ ~ ~ ~
T22 1913–14 ~ From 18 to 60 ~ ~ ~ ~
T23 1913–14 ~ From 30 to 90 ~ ~ ~ ~
T26 1914–15 ~ 20 ~ ~ ~ ~
T30 1915–24 ~ 16 ~ ~ ~ ~
32 HP 1916 ~ 32 ~ ~ ~ ~
H6B 1919–29 6 135 6600 4-wheel drum brakes with power-assisted brakes Manual transmission, 3 gears and reverse 137 km/h (85 mph)
I6 1924 6 3746 4-wheel drum brakes with power-assisted brakes Manual transmission, 3 gears and reverse 145 km/h (90 mph)
T48 1924 4 90 2500 ~ ~ ~
T49 1924–36 ~ ~ ~ ~ ~ ~
T64 1929–33 ~ ~ ~ ~ ~ ~
T60/T60 RL/T60 1932–43 ~ ~ ~ ~ ~ ~
H6C 1924–29 6 160 8000 4-wheel drum brakes with power-assisted brakes Manual transmission, 3 gears and reverse 177 km/h (110 mph)
T56 1928–36 6 46 ~ ~ ~ ~
J12 1931–38 12 220 9500 ~ Manual transmission, 3 gears and reverse 150 km/h (93 mph)[14][15]
K6 1934–37 6 120 5200 4-wheel drum brakes with power-assisted brakes Manual transmission, 3 gears and reverse 140 km/h (87 mph)
H6B "Xenia" 1938 6 160 7983 4-wheel drum brakes with power-assisted brakes Manual transmission, 4 gears and reverse 177 km/h (110 mph)
Carmen 2020 503 bhp permanent-magnet synchronous electric motor on each rear wheel 1019 - 380x34mm carbon-ceramic discs AP Racing with six-piston Radi-CAL calipers - 250 km/h
Carmen Boulogne 2021 503 bhp permanent-magnet synchronous electric motor on each rear wheel 1114 - - 250 km/h


The models H6B (1919–29), H6C (1924–29), I6 (1924), Hispano-Suiza Junior or HS26 (1931–32), J12 (1931–38) and K6 (1934–37) were made by the French division, the rest were manufactured in Spain.

Aircraft

[edit]
Hispano-Suiza E-30 of the Aeronáutica Naval

Aircraft engines

[edit]
Main article: Hispano-Suiza piston aero-engines
A 300hp Wright-Hisso H on display

See also

[edit]

References

[edit]
  1. ^ "Hispano Suiza". Associació d'Estudis Hisòrics de l'automoció | AEHA (in European Spanish). Retrieved February 25, 2020.
  2. ^ Browne, T.C. "Retrospect: 1924 Hispano-Suiza H6c Speedster", Motor Trend, 4/84, p.118.
  3. ^ Georgano, G. N. Cars: Early and Vintage, 1886–1930. London: Grange-Universal, 1985
  4. ^ "Hispano-Suiza clásicos, entre los vehículos más bellos de la historia". abc (in Spanish). October 31, 2018. Retrieved April 16, 2020.
  5. ^ International Harvester Corporation. "Mr. Dealer Plan Now for the Future", Harvester World, Volume 34, Number 11, November 1943, p.16. Harvester Press, Chicago, 1943.
  6. ^ "Prototipos Hispano-Suiza". hispanosuiza.webcindario.com. Retrieved December 9, 2024.
  7. ^ Markus, Frank (February 1, 2001). "Hispano-Suiza K8". Car and Driver. Retrieved December 9, 2024.
  8. ^ D, Nick (April 6, 2016). "2002 Hispano-Suiza HS21-GTS Prototype". Supercars.net. Retrieved December 9, 2024.
  9. ^ a b Who has the right to use the Hispano Suiza name?, autocar.co.uk, 1 March 2019.
  10. ^ Markus, Frank (March 3, 2010). "2010 Geneva: Hispano Suiza Revived With All-New Audi-Based Supercar". Motortrend. Retrieved December 9, 2024.
  11. ^ Lieberman, Jonny (March 2, 2010). "Geneva 2010: Hispano Suiza debuts the... Hispano Suiza — Autoblog". Autoblog.com. Retrieved March 9, 2010.
  12. ^ Glucker, Jeff (October 30, 2018). "Hispano-Suiza revival set for 2019 Geneva auto show". motorauthority.com. Retrieved November 5, 2018.
  13. ^ Hispano Suiza Carmen Debuts In Geneva With 1930's Style, 1005 HP, www.motor1.com.
  14. ^ "1934 Hispano Suiza J12 Technical Specifications and Dimensions".
  15. ^ "1934 Hispano-Suiza J12". April 6, 2016.
  16. ^ a b c d e f g h i j k l m n o Hartmann, Gérard. Hispano-Suiza, Les moteurs de tous les Records.pdf (in French).
  17. ^ a b Gunston, Bill (2006). World Encyclopedia of Areo Engines (5th ed.). Stroud: Sutton Publishing. ISBN 0-7509-4479-X.
[edit]
Wikimedia Commons has media related to Hispano-Suiza.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Hispano-Suiza&oldid=1262140365"