Stielhandgranate

Not to be confused with the German cannon-caliber rifle-grenades: Stielgranate 41 and Stielgranate 42.

Stielhandgranate

Top left: German soldier ready to throw a Stielhandgranate 24.
Top right: Translated cross-section of the Stielhandgranate 24.
Lower left: Two Stielhandgranate 24s on a belt.
Lower right: Demonstration of a German Stielhandgranate 24, 1946.

Stielhandgranate is the German term for "stick hand grenade" and generally refers to a prominent series of World War I and World War II–era German stick grenade designs, distinguished by their long wooden handles, pull cord arming and cylindrical warheads. The first models were introduced by the Imperial German Army during World War I and the final design was introduced during World War II by the German Wehrmacht.

The distinctive appearance of the Stielhandgranate family has led to them being called "potato mashers" in British Army slang, and they remain one of the most easily recognized infantry weapons of the 20th century.

World War I models: 1915–1917

Stielhandgranate: M15, M16, M17
Two First World War Stielhandgranaten alongside a vaguely similar Austro-Hungarian ceramic design. The front Stielhandgranate is the Model 1917, and the back Stielhandgranate is the Model 1916 with visible belt clips.
Place of origin	German Empire
Service history
In service	German Empire (1915–1918)
Used by	See Users
Wars	World War I
Production history
Designed	1915, 1916, 1917 (respectively)
Variants	Stielhandgranate 15 (M15) Stielhandgranate 16 (M16) Stielhandgranate 17 (M17)
Specifications
Filling	Trinitrotoluene
Detonation mechanism	friction igniter and 4+1⁄2 second delay

Germany entered World War I with a single grenade type: a heavy 750-gram (26 oz) ball-shaped fragmentation grenade (Kugelhandgranate) for use only by pioneers in attacking fortifications. It was too heavy for regular battlefield use by untrained troops and not suitable for mass production. This left Germany without a standard-issue grenade and improvised designs similar to those of the British were used until a proper grenade could be supplied.

Germany introduced the "stick grenade" in 1915, the second year of the conflict. Aside from its unusual appearance, the Stielhandgranate used a friction igniter system. This had been used in other German grenades, but was uncommon internationally.

During World War I, the Stielhandgranate, under the name M1915 (Model 1915), competed technologically with the British standard-issue Mills bomb series. The first Mills bomb – the grenade No. 5 Mk. 1 – was introduced the same year as the German Model 1915, but due to manufacturing delays it was not widely distributed into general service until 1916. Thus, there was a small period of time where German troops had large supplies of new Model 1915 grenades, while their British opponents only had a small number.

As World War I progressed, the Model 1915 Stielhandgranate was improved with various changes. These variants received designations such as the Model 1916 and the Model 1917.

Model 1915 (M15): Stielhandgranate 15

Stielhandgranate 15

In 1915, industries of the German Empire designed and began production of the original Stielhandgranate, the "Model 1915" (M15). It used a priming system, unlike the percussion cap pin used in most grenades of the period. The easily recognizable "potato masher" shape is a result of a number of different styles and choices of the design. The grenade mounted a charge head within a sheet-steel cylinder atop a long hollow wooden handle. Internally, the explosive – initially ammonal but later approximately 170 g (6.0 oz) of trinitrotoluene filling – was connected to a detonator, and a pull cord ran from the detonator down the length of the hollow handle, emerging from the base. To use it, a soldier would pull the string downwards, dragging a rough steel rod through the igniter within the fuse. The rod's abrasive contact would cause sparks and a flame to light, setting the fuse burning. This fuse took approximately four and a half seconds to reach the detonator before exploding.

The British War Office reported average thrown distance of a Mills bomb as 27 m (30 yd) when standing, 23 m (25 yd) when crouched and 22 m (24 yd) lying prone. One issue that hand grenades of the time had was unpredictable rolling after landing. The Stielhandgranate did not suffer nearly as much. Instead of rolling straight down a hill or across rough terrain, it would instead roll from side to side. However, the larger size and the irregular overall shape meant that fewer grenades could be carried. It also took longer to prime the grenade than Allied counterparts such as the Mills bomb.

The Stielhandgranate primarily relied on a concussion blast effect, its thin metal container creating little fragmentation compared with many grenades of the time, such as the Mills bomb and the French F1 grenade, the later World War II American Mk 2 grenade, and the Russian (later Soviet) F1 grenade. Fragmentation grenades produced shrapnel which could wound enemy infantry over a large area, which made these types very useful in open areas such as fields, the blasted expanse of no man's land, beaches, spacious trenches, and wide city streets.

Concussion grenades were primarily designed to stun opponents at close quarters with the blast of their explosive charge, thereby reducing resistance for the immediately following-up infantry assault closing with its target with rifles and bayonets. The Stielhandgranate was extremely effective and reliable in clearing enclosed areas, such as buildings, fortifications, and the fighting compartments of enemy tanks, although performance in wide open areas was less satisfactory. The blast effect went only a limited distance before dying out, while pieces from an equivalent fragmentation grenade could fly hundreds of metres (it was not unrealistic to expect that metal shrapnel could create friendly fire casualties, especially in open areas).

Model 1916 (M16): Stielhandgranate 16

The pull cord which activated the M15 grenade's fuse protruded from the base and could get caught in debris or clutter on the battlefields of World War I, causing the fuse to be ignited, and the grenade to explode on the belt of an unaware infantryman. This resulted in the introduction of the Model 1916 (M16).

Functionally identical to the M15, the M16 changed the pull cord to improve safety. A small porcelain ball was placed at the base of the grenade, attached directly to the pull cord. This prevented the string from being exposed. The small bead was partially enveloped in the wooden handle, meaning that some force was needed to pluck it out. Operation was nearly identical, except that a soldier no longer needed to pull the string itself.

Model 1917 (M17): Stielhandgranate 17

Another development of the Stielhandgranate was implemented during the later stages of World War I, affecting the priming system. The base of the Stielhandgranate's handle was slightly redesigned, and a metal cover cap was introduced. This cap concealed the porcelain bead and pull cord, allowing it to simply rest freely inside of the handle. The operator pulled the cap off and then pulled the cord as with the M16.

• 
  M17 grenade among a British Mills bomb grenade and a M1879 Reichsrevolver
• 
  Removed metal cap on M17 grenade
• 
  Exposed pull cord on M17 grenade

Model 1924 (M24): Stielhandgranate 24

Soldier in Croatian volunteer unit of the German army with a Stielhandgranate tucked in his belt (colorized)

Stielhandgranate Model 1924
Model 1924 Stielhandgranate
Place of origin	Weimar Republic
Service history
In service	Weimar Republic (1924–1933) Nazi Germany (1933–1945)
Used by	See Users
Wars	Spanish Civil War Second Sino-Japanese War World War II
Production history
Designed	1924
Specifications
Mass	595 g (1 lb 5.0 oz)
Length	365 mm (1 ft 2.4 in)
Diameter	70 mm (2.8 in)
Filling	Trinitrotoluene
Filling weight	170 g (6.0 oz)
Detonation mechanism	friction igniter and 4¹/₂ second delay

With the German Empire's defeat at the conclusion of World War I, the collapse of industrial capability and military strength of Germany left many projects and ideas forgotten for years. When the newly created Weimar Republic progressively began to repair both the physical and economic devastation, a slow rebuilding of the armed forces was allowed under the limitations set by the allies.

The Weimar Republic revived the Stielhandgranate, and created a new version in 1924, the "Model 1924" (M24). While retaining the same explosive and fuse, the main distinction between the M24 and the original M15 is a slightly shorter charge head and the removal of a belt carry clip. At the same time the wooden handle was lengthened. The intent of these design alterations was simply for mobility; German soldiers could easily (and often did) tuck the grenade in behind their uniform's belt, held tight and secure. Being slightly lighter, and smaller in thickness, this improved overall use.

The M24 (75.5 million produced) was beside the more common Model 39 grenade (84.2 million produced) the standard hand grenade of the German Wehrmacht during World War II. Adapting to the rapidly changing field of modern warfare, German soldiers would carry the M24 directly in front, allowing quick and easy access. However, in the later years of the war it was often advised to carry them in a different manner, as it was very likely any sort of explosion or heat could light the fuse from the grenade on the belt, resulting in unnecessary casualties.

The Model 24 Stielhandgranate was stored in specially designed crates during transport, which could carry up to 15 individual grenades. As a safety precaution, units of the Wehrmacht were advised to only insert the actual fuse assemblies when about to go into combat. Later in the war, however, many soldiers of the Wehrmacht would always have their weapons ready, due to the fierceness seen in the Soviet Red Army in the east and the progressive advance of the Allies on the Western Front. A reminder was stenciled on each explosive charge: Vor Gebrauch Sprengkapsel einsetzen ("Before use insert detonator").

Variants of the Stielhandgranate 24

The Model 1924 was rather ineffective by itself at damaging or disabling an enemy armored vehicle or destroying fortifications. It also lacked the shrapnel effect of most other grenades of the time. To overcome these faults, various German industries during World War II produced a number of variants that widened the utility and capability of the M24.

Winter variant (K variant): Stielhandgranate 24 Kalt

During numerous operations of the invasion of the Soviet Union, the Heer found that under freezing conditions the M24's fuse could fail to ignite. In response, a variant with a cold-resistant explosive was developed and supplied to most units deployed on the eastern front (especially into present-day Russia). During production, the metal charge head was marked with a letter K, for the German word Kalt (English: cold).

Smoke variant: Nebelhandgranate 39

German soldier with Nebelhandgranate 39 (colorized)

The Wehrmacht lacked a proper smoke grenade to allow infantry to cover advances or retreats, or for assaulting a position. A smoke version of the M24, the Nebelhandgranate 39 (English: Fog hand grenade 39), was produced. It had a remodeled fuse mechanism and a smoke charge instead of explosive; the smoke emitted from small vents in the underside of the charge head. To make it readily distinguishable from an M4, it had large markings on the head and a white band on the handle. Later, the handle was textured so that they could be told apart by touch.

Exercise variant: Übungs-Stielhandgranate 24

Like most of the forces that took part in World War II, the Wehrmacht produced inert (not able to explode) practice versions of the standard-issue grenade, designed to aid recruits on how to properly throw and operate the weapon during training. An exercise version called Übungs-Stielhandgranate 24 (English: Exercise-stick hand grenade 24) was introduced that was characterized by its bright-red warhead with big perforated holes going throughout. The Übungs-Stielhandgranate 24 could be outfitted with an exercise charge and a fuse with a pull cord that made a bang and puff of smoke to indicate explosion when used.

Alternative use of the Stielhandgranate 24

Improvised "bundle charge": Geballte Ladung

The M24 lacked effectiveness against hard targets such as tanks and buildings. A common solution was an improvised "bundle charge", officially known as Geballte Ladung (English: "concentrated charge"). The heads of a number of M24 grenades – their handles and fuses removed – would be strapped around a complete grenade, usually with simple rope, cloth, or metal wire, a solution initially invented during World War I using M15, M16 and M17 grenades. These "bundle charges" could be crafted with up to six additional heads around the complete grenade, the most common styles being the addition of four or six M24 heads.

As a result of this cost-effective and reliable solution, the standard infantryman of the Wehrmacht could quickly improvise a grenade with up to seven times the explosive power. However, the added weight made it more difficult to throw, and the increased size meant that it was not practical to carry with one hand and that far fewer could be carried. These factors meant that infantry squads, if faced with an armored enemy, would have to close to a reduced range if they wanted to use the bundle charges. During the early years of World War II, there was little in terms of truly effective German handheld weaponry designed to fight hard targets such as armored vehicles and structures, and even later in the war this style of bundle grenade remained useful to the common Heer infantryman.

Improvised "bangalore torpedo": Gestreckte Ladung

A different version of improvised weapon using M24 grenades was the Gestreckte Ladung (English: Elongated Charge), a type of bangalore torpedo made out of a number of M24 grenades – their handles and fuses removed and replaced with detonators – mounted to a long stick or plank behind one another with a complete grenade at one end to initiate the explosion.

Foreign use and designs of Stielhandgranate 24

Separate from Nazi Germany, the Stielhandgranate 24 was used globally during World War II. A number of nations either directly acquired or purchased stockpiles of the grenade, or created similar versions with very slight adjustments.

China (M24 clones, Type 67)

See also: Sino-German cooperation (1926–1941)

China started using the M24 Stielhandgranate as a result of the German involvement in the modernization of the Chinese Army during the Sino-German cooperation 1926–1941. During this period the Chinese army would adopt German uniforms and equipment, such as the Stielhandgranate 24.

During the Second Sino-Japanese War (1937–1945), the Chinese designed and produced a grenade based on the Model 1924 which was used by the National Revolutionary Army. Such grenades were the main type of grenade used by Chinese forces during the whole war. The M24 inspired clone was a simple design and was mass-produced in large numbers, not only in arsenals (primarily in the 1st, 11th, 21st, 24th, 25th and 30th), but also by hand with the help of civilians. Hundreds of thousands of grenades were produced each month. There were some variations in the design, but most followed the same basic pattern: A wooden handle with a round or cylindrical warhead and a slow burning fuse. The charge was a mixture of TNT and potassium nitrate, and they were generally somewhat weaker than their German counterpart. In 1939, a new design with a smaller handle and much more compressed explosive load began trials. The resulting model was lighter and more powerful and the ordnance office decreed it to be the new standard type in all arsenals.

Just like German troops, Chinese soldiers often bundled grenades together to blast open fortifications, vehicles and the like. Another tactic was to tie a grenade to a long bamboo stick, for example to stick up over a wall or into a window.

After World War II, the People's Liberation Army standardized a variant of the grenade, designated "Type 67". It became the standard grenade for the PLA and was also supplied in huge numbers to the Viet Cong and the People's Army of Vietnam during the Vietnam War.

• 
  A Chinese infantryman wielding an M24 in German uniform
• 
  Chinese soldier wearing a German helmet holding an M24-style grenade
• 
  Chinese workers producing copies of the M24 by hand.
• 
  Chinese combat vest circa 1942 outfitted with four Chinese made stick grenades
• 
  Chinese suicide bomber putting on an explosive vest of M24 style hand grenades to use against Japanese tanks at the Battle of Taierzhuang

Japan (Type 98)

Main article: Type 98 grenade

In 1938, the Imperial Japanese Army copied the Chinese Stielhandgranate 24 and produced them at a Japanese factory in Manchuria (then Japanese Manchukuo). These were designated the "Type 98". Unlike both the original German M24 and its Chinese counterpart, the Type 98 was a fragmentation grenade. The charge, however, was weak and only contained 85 g (3 oz) of picric acid (more powerful but less safe than TNT). The weapon had a pull ring attached to the igniting cord, and the fuse delay was 4 to 5 seconds (varying from grenade to grenade). Like the Chinese grenades, it was a crude copy of the Model 1924 and a number of issues plagued its effectiveness.

Sweden (Shgr m/39)

To catch up in the arms race leading to WWII, Sweden managed to purchase a large amount of German produced M24s in 1939, adopting it as the spränghandgranat m/39 (abbr. shgr m/39), meaning: "explosive hand grenade m/39". Later shipments included wartime changes to the grenades, such as a metal pull cord and cheaper explosives such as nitrolite, leading to four designs in use eventually: m/39, m/39A, m/39B and m/39C. These would remain in use until expended during the Cold War.

Along the M24s, the exercise "Übungs-Stielhandgranate 24" variant was also purchased, being adopted as the övningshandgranat m/39 (abbr. övnhgr m/39), meaning: "practice hand grenade m/39". They were painted according to Swedish color code with a blue stripe to indicate exercise charge. German ones were painted red. Later on the övnhgr m/39s were modified to use more modern exercise charges, receiving suffix letters per upgrade, eventually resulting in the övnhgr m/39C.

Sweden also produced an indigenous design similar to the M24, featuring a pull cord through the handle for arming the time-fuze, but also differing in a great number of areas, such as having a full metal tube for the handle, a more rounded warhead, and other quality of life additions to the overall design. It was designated spränghandgranat m/43.

• 
  Swedish spränghandgranat m/39 (shgr m/39)
• 
  Swedish övningshandgranat m/39 (övnhgr m/39)

Model 1943 (M43): Stielhandgranate 43 and Eihandgranate 43

Stielhandgranate 43 with a splitterring fragmentation sleeve

As the war progressed and the Wehrmacht began to lose strength and momentum against the Soviet Union, Nazi Germany began implementing measures to ensure the safety and reliability of its weapons. The Wehrmacht needed to minimize the risk of injury or death caused by faults of its military equipment, munitions, and weapons.

Germany's industrial capabilities decreased as the war progressed. As a result, the production of munitions, equipment, and weaponry had to become easier and more cost-efficient. Some of these, like the Maschinengewehr 42, were more than a success on the level of resources, but many were only simpler and less-expensive versions of an existing item. The Model 1924 grenade was technically "succeeded" by the Model 1943 (M43). This was a copy with a few expensive parts removed or replaced for easier production – and because of this, the original remained in service with Wehrmacht infantry right to the end of the war.

The only significant alterations in the M43's design was the inclusion of a self-contained detonator, meaning that the fuse and the explosive were directly linked. The M43 also utilized an entirely different fuse assembly, very similar to that of the Model 39 grenade, another German hand grenade of the time. Not only was the stick no longer needed to be hollowed out for a pull cord as in the M24, minimizing the amount of woodworking required to manufacture each grenade, it also made the stick optional so it could replace the Model 39 as the thrower could choose in which configuration to use the grenade. Whether it was intended to merge the production of two types into a single line, or if that was a beneficial side-effect is unknown.

Users

The German Stielhandgranate-series has been used in many conflicts, including both world wars.

Official and unofficial users of all versions of the Stielhandgranate

User	Type of service	Self-manufactured	Type of model in use
			Model 1915	Model 1916	Model 1917	Model 1924	Model 1943
Official users
German Empire	Full military service	✓	✓	✓	✓	X	X
Weimar Republic	Full military service	✓	X	X	X	✓	X
Nazi Germany	Full military service	✓	X	X	X	✓	✓
Sweden	Full military service	X	X	X	X	✓	X
Unofficial users
Austria-Hungary	Leased/purchased	X	✓	✓	✓	X	X
Kingdom of Hungary	Leased/purchased	X	X	X	X	✓	✓
Independent State of Croatia	?	X	?	?	?	✓	✓?
Finland	Leased/purchased	X	X	X	X	✓	X
Soviet Union	Captured/scavenged	X	X	X	X	✓	✓
Latvia	Captured/scavenged	X	✓	✓	✓	X	X
France	Captured/scavenged	X	✓	✓	✓	✓	✓

Foreign designs

User	Type of service	Version
		Chinese copies	Type 98	Type 67
Empire of Japan	Captured/local design produced	✓	✓	X
Republic of China	Local design produced	✓	X	X
People's Republic of China	Local design produced	✓	X	✓
North Vietnam	Leased/purchased	X	X	✓

See also

• List of World War II firearms of Germany
• List of German military equipment of World War II
• Model 39 grenade – German "egg" type hand grenade
• RGD-33 grenade – Early WWII Soviet stick grenade
• Splitterring – A fragmentation sleeve for the M24 and M43

External links

• German Mod.24 - Mod.43 Stielhandgranate
• German Grenades World War II
• German Hand & Rifle Grenades Bulletin No. 59, March 7, 1944 wartime intelligence briefing
• Model 24 Stielhandgranate Grenade—World War II Database
• Stielhandgranate 43