Jump to content

Fischer–Tropsch process

From Wikipedia, the free encyclopedia
(Redirected from Gasified coal)

The Fischer–Tropsch process (FT) is a collection of chemical reactions that converts a mixture of carbon monoxide and hydrogen, known as syngas, into liquid hydrocarbons. These reactions occur in the presence of metal catalysts, typically at temperatures of 150–300 °C (302–572 °F) and pressures of one to several tens of atmospheres. The Fischer–Tropsch process is an important reaction in both coal liquefaction and gas to liquids technology for producing liquid hydrocarbons.[1]

In the usual implementation, carbon monoxide and hydrogen, the feedstocks for FT, are produced from coal, natural gas, or biomass in a process known as gasification. The process then converts these gases into synthetic lubrication oil and synthetic fuel.[2] This process has received intermittent attention as a source of low-sulfur diesel fuel and to address the supply or cost of petroleum-derived hydrocarbons. Fischer–Tropsch process is discussed as a step of producing carbon-neutral liquid hydrocarbon fuels from CO2 and hydrogen.[3][4][5]

The process was first developed by Franz Fischer and Hans Tropsch at the Kaiser Wilhelm Institute for Coal Research in Mülheim an der Ruhr, Germany, in 1925.[6]

Reaction mechanism

[edit]
Methylidyne­tricobalt­nonacarbonyl is a molecule that illustrates the kind of reduced carbon species speculated to occur in the Fischer–Tropsch process.

The Fischer–Tropsch process involves a series of chemical reactions that produce a variety of hydrocarbons, ideally having the formula (CnH2n+2). The more useful reactions produce alkanes as follows:[7]

(2n + 1) H2 + n CO → CnH2n+2 + n H2O

where n is typically 10–20. The formation of methane (n = 1) is unwanted. Most of the alkanes produced tend to be straight-chain, suitable as diesel fuel. In addition to alkane formation, competing reactions give small amounts of alkenes, as well as alcohols and other oxygenated hydrocarbons.[8]

The reaction is a highly exothermic reaction due to a standard reaction enthalpy (ΔH) of −165 kJ/mol CO combined.[9]

Fischer–Tropsch intermediates and elemental reactions

[edit]

Converting a mixture of H2 and CO into aliphatic products is a multi-step reaction with several intermediate compounds. The growth of the hydrocarbon chain may be visualized as involving a repeated sequence in which hydrogen atoms are added to carbon and oxygen, the C–O bond is split and a new C–C bond is formed. For one –CH2– group produced by CO + 2 H2 → (CH2) + H2O, several reactions are necessary:

  • Associative adsorption of CO
  • Splitting of the C–O bond
  • Dissociative adsorption of 2 H2
  • Transfer of 2 H to the oxygen to yield H2O
  • Desorption of H2O
  • Transfer of 2 H to the carbon to yield CH2

The conversion of CO to alkanes involves hydrogenation of CO, the hydrogenolysis (cleavage with H2) of C–O bonds, and the formation of C–C bonds. Such reactions are assumed to proceed via initial formation of surface-bound metal carbonyls. The CO ligand is speculated to undergo dissociation, possibly into oxide and carbide ligands.[10] Other potential intermediates are various C1 fragments including formyl (CHO), hydroxycarbene (HCOH), hydroxymethyl (CH2OH), methyl (CH3), methylene (CH2), methylidyne (CH), and hydroxymethylidyne (COH). Furthermore, and critical to the production of liquid fuels, are reactions that form C–C bonds, such as migratory insertion. Many related stoichiometric reactions have been simulated on discrete metal clusters, but homogeneous Fischer–Tropsch catalysts are of no commercial importance.

Addition of isotopically labelled alcohol to the feed stream results in incorporation of alcohols into product. This observation establishes the facility of C–O bond scission. Using 14C-labelled ethylene and propene over cobalt catalysts results in incorporation of these olefins into the growing chain. Chain growth reaction thus appears to involve both 'olefin insertion' as well as 'CO-insertion'.[11]

Feedstocks: gasification

[edit]

Fischer–Tropsch plants associated with biomass or coal or related solid feedstocks (sources of carbon) must first convert the solid fuel into gases. These gases include CO, H2, and alkanes. This conversion is called gasification.[12] Synthesis gas ("syngas") is obtained from biomass/coal gasification is a mixture of hydrogen and carbon monoxide. The H2:CO ratio is adjusted using the water-gas shift reaction. Coal-based FT plants produce varying amounts of CO2, depending upon the energy source of the gasification process. However, most coal-based plants rely on the feed coal to supply all the energy requirements of the process.

Feedstocks: GTL

[edit]

Carbon monoxide for FT catalysis is derived from hydrocarbons. In gas to liquids (GTL) technology, the hydrocarbons are low molecular weight materials that often would be discarded or flared. Stranded gas provides relatively cheap gas. For GTL to be commercially viable, gas must remain relatively cheaper than oil.

Several reactions are required to obtain the gaseous reactants required for FT catalysis. First, reactant gases entering a reactor must be desulfurized. Otherwise, sulfur-containing impurities deactivate ("poison") the catalysts required for FT reactions.[8][7]

Several reactions are employed to adjust the H2:CO ratio. Most important is the water-gas shift reaction, which provides a source of hydrogen at the expense of carbon monoxide:[8]

For FT plants that use methane as the feedstock, another important reaction is dry reforming, which converts the methane into CO and H2:

Process conditions

[edit]

Generally, the Fischer–Tropsch process is operated in the temperature range of 150–300 °C (302–572 °F). Higher temperatures lead to faster reactions and higher conversion rates but also tend to favor methane production. For this reason, the temperature is usually maintained at the low to middle part of the range. Increasing the pressure leads to higher conversion rates and also favors the formation of long-chained alkanes, both of which are desirable. Typical pressures range from one to several tens of atmospheres. Even higher pressures would be favorable, but the benefits may not justify the additional costs of high-pressure equipment, and higher pressures can lead to catalyst deactivation via coke formation.

A variety of synthesis-gas compositions can be used. For cobalt-based catalysts the optimal H2:CO ratio is around 1.8–2.1. Iron-based catalysts can tolerate lower ratios, due to the intrinsic water-gas shift reaction activity of the iron catalyst. This reactivity can be important for synthesis gas derived from coal or biomass, which tend to have relatively low H2:CO ratios (< 1).

Design of the Fischer–Tropsch process reactor

[edit]

Efficient removal of heat from the reactor is the basic need of FT reactors since these reactions are characterized by high exothermicity. Four types of reactors are discussed:

Multi tubular fixed-bed reactor

[edit]
This type of reactor contains several tubes with small diameters. These tubes contain catalysts and are surrounded by cooling water which removes the heat of the reaction. A fixed-bed reactor is suitable for operation at low temperatures and has an upper-temperature limit of 257 °C (530 K). Excess temperature leads to carbon deposition and hence blockage of the reactor. Since large amounts of the products formed are in liquid state, this type of reactor can also be referred to as a trickle flow reactor system.

Entrained flow reactor

[edit]
This type of reactor contains two banks of heat exchangers which remove heat; the remainder of which is removed by the products and recycled in the system. The formation of heavy waxes should be avoided, since they condense on the catalyst and form agglomerations. This leads to fluidization. Hence, risers are operated over 297 °C (570 K).

Slurry reactors

[edit]
Heat removal is done by internal cooling coils. The synthesis gas is bubbled through the waxy products and finely-divided catalyst which is suspended in the liquid medium. This also provides agitation of the contents of the reactor. The catalyst particle size reduces diffusional heat and mass transfer limitations. A lower temperature in the reactor leads to a more viscous product and a higher temperature (> 297 °C, 570 K) gives an undesirable product spectrum. Also, separation of the product from the catalyst is a problem.

Fluid-bed and circulating catalyst (riser) reactors

[edit]
These are used for high-temperature FT synthesis (nearly 340 °C) to produce low-molecular-weight unsaturated hydrocarbons on alkalized fused iron catalysts. The fluid-bed technology (as adapted from the catalytic cracking of heavy petroleum distillates) was introduced by Hydrocarbon Research in 1946–50 and named the 'Hydrocol' process. A large scale Fischer–Tropsch Hydrocol plant (350,000 tons per annum) operated during 1951–57 in Brownsville, Texas. Due to technical problems, and impractical economics due to increasing petroleum availability, this development was discontinued. Fluid-bed FT synthesis has been reinvestigated by Sasol. One reactor with a capacity of 500,000 tons per annum is in operation. The process has been used for C2 and C7 alkene production. A high-temperature process with a circulating iron catalyst ('circulating fluid bed', 'riser reactor', 'entrained catalyst process') was introduced by the Kellogg Company and a respective plant built at Sasol in 1956. It was improved by Sasol for successful operation. At Secunda, South Africa, Sasol operated 16 advanced reactors of this type with a capacity of approximately 330,000 tons per annum each. The circulating catalyst process can be replaced by fluid-bed technology. Early experiments with cobalt catalyst particles suspended in oil have been performed by Fischer. The bubble column reactor with a powdered iron slurry catalyst and a CO-rich syngas was particularly developed to pilot plant scale by Kölbel at the Rheinpreuben Company in 1953. Since 1990, low-temperature FT slurry processes are under investigation for the use of iron and cobalt catalysts, particularly for the production of a hydrocarbon wax, or to be hydrocracked and isomerized to produce diesel fuel, by Exxon and Sasol. Slurry-phase (bubble column) low-temperature FT synthesis is efficient. This technology is also under development by the Statoil Company (Norway) for use on a vessel to convert associated gas at offshore oil fields into a hydrocarbon liquid.[13]

Product distribution

[edit]

In general the product distribution of hydrocarbons formed during the Fischer–Tropsch process follows an Anderson–Schulz–Flory distribution,[14] which can be expressed as:

⁠Wn/n⁠ = (1 − α)2αn−1

where Wn is the weight fraction of hydrocarbons containing n carbon atoms, and α is the chain growth probability or the probability that a molecule will continue reacting to form a longer chain. In general, α is largely determined by the catalyst and the specific process conditions.

Examination of the above equation reveals that methane will always be the largest single product so long as α is less than 0.5; however, by increasing α close to one, the total amount of methane formed can be minimized compared to the sum of all of the various long-chained products. Increasing α increases the formation of long-chained hydrocarbons. The very long-chained hydrocarbons are waxes, which are solid at room temperature. Therefore, for production of liquid transportation fuels it may be necessary to crack some of the FT products. In order to avoid this, some researchers have proposed using zeolites or other catalyst substrates with fixed sized pores that can restrict the formation of hydrocarbons longer than some characteristic size (usually n < 10). This way they can drive the reaction so as to minimize methane formation without producing many long-chained hydrocarbons. Such efforts have had only limited success.

Catalysts

[edit]

Four metals are active as catalysts for the Fischer–Tropsch process: iron, cobalt, nickel, and ruthenium. Since FT process typically transforms inexpensive precursors into complex mixtures that require further refining, FT catalysts are based on inexpensive metals, especially iron and cobalt.[15][16] Nickel generates too much methane, so it is not used.[7]

Typically, such heterogeneous catalysts are obtained through precipitation from iron nitrate solutions. Such solutions can be used to deposit the metal salt onto the catalyst support (see below). Such treated materials transform into active catalysts by heating under CO, H2 or with the feedstock to be treated, i.e., the catalysts are generated in situ. Owing to the multistep nature of the FT process, analysis of the catalytically active species is challenging. Furthermore, as is known for iron catalysts, a number of phases may coexist and may participate in diverse steps in the reaction. Such phases include various oxides and carbides as well as polymorphs of the metals. Control of these constituents may be relevant to product distributions. Aside from iron and cobalt, nickel and ruthenium are active for converting the CO/H2 mixture to hydrocarbons.[11] Although expensive, ruthenium is the most active of the Fischer–Tropsch catalysts in the sense that It works at the lowest reaction temperatures and produces higher molecular weight hydrocarbons. Ruthenium catalysts consist of the metal, without any promoters, thus providing relatively simple system suitable for mechanistic analysis. Its high price preclude industrial applications. Cobalt catalysts are more active for FT synthesis when the feedstock is natural gas. Natural gas has a high hydrogen to carbon ratio, so the water-gas shift is not needed for cobalt catalysts. Cobalt-based catalysts are more sensitive than their iron counterparts.

Illustrative of real world catalyst selection, high-temperature Fischer–Tropsch (HTFT), which operates at 330–350 °C, uses an iron-based catalyst. This process was used extensively by Sasol in their coal-to-liquid plants (CTL). Low-temperature Fischer–Tropsch (LTFT) uses an iron- or cobalt-based catalyst. This process is best known for being used in the first integrated GTL-plant operated and built by Shell in Bintulu, Malaysia.[17]

Promoters and supports

[edit]

In addition to the active metal (usually Fe or Co), two other components comprise the catalyst: promoters and the catalyst support. Promoters are additives that enhance the behavior of the catalyst. For F-T catalysts, typical promoters including potassium and copper, which are usually added as salts. The choice of promoters depends on the primary metal, iron vs cobalt.[18] Iron catalysts need alkali promotion to attain high activity and stability (e.g. 0.5 wt% K2O). Potassium-doped α-Fe2O3 are synthesized under variable calcination temperatures (400–800 °C).[19] Addition of Cu for reduction promotion, addition of SiO
2, Al
2O
3 for structural promotion and maybe some manganese can be applied for selectivity control (e.g. high olefinicity). The choice of promoters depends on the primary metal, i.e., iron vs cobalt.[18] While group 1 alkali metals (e.g., potassium), help iron catalysts, they poison cobalt catalysts.

Catalysts are supported on high-surface-area binders/supports such as silica, alumina, or zeolites.[16]

History

[edit]
Max Planck Institute for Coal Research at Mülheim an der Ruhr, Germany.

The F-T process attracted attention as a means of Nazi Germany to produce liquid hydrocarbons. The original process was developed by Franz Fischer and Hans Tropsch, working at the Kaiser-Wilhelm-Institut for Chemistry in 1926. They filed a number of patents, e.g., U.S. patent 1,746,464, applied 1926, published 1930.[20] It was commercialized by Brabag in Germany in 1936. Being petroleum-poor but coal-rich, Germany used the process during World War II to produce ersatz (replacement) fuels. FT production accounted for an estimated 9% of German war production of fuels and 25% of the automobile fuel.[21] Many refinements and adjustments have been made to the process since Fischer and Tropsch's time.

The United States Bureau of Mines, in a program initiated by the Synthetic Liquid Fuels Act, employed seven Operation Paperclip synthetic fuel scientists in a Fischer–Tropsch plant in Louisiana, Missouri in 1946.[21][22]

In Britain, Alfred August Aicher obtained several patents for improvements to the process in the 1930s and 1940s.[23] Aicher's company was named Synthetic Oils Ltd (not related to a company of the same name in Canada).[citation needed]

Around the 1930s and 1940s, Arthur Imhausen developed and implemented an industrial process for producing edible fats from these synthetic oils through oxidation.[24] The products were fractionally distilled and the edible fats were obtained from the C
9-C
16 fraction[25] which were reacted with glycerol such as that synthesized from propylene.[26] "Coal butter" margarine made from synthetic oils was found to be nutritious and of agreeable taste, and it was incorporated into diets contributing as much as 700 calories per day.[27][28] The process required at least 60 kg of coal per kg of synthetic butter.[26]

Commercialization

[edit]
Fluidized bed gasification with FT-pilot in Güssing, Burgenland, Austria. Operated by SGCE and Velocys

Ras Laffan, Qatar

[edit]
Main article: Oryx GTL

The LTFT facility Pearl GTL at Ras Laffan, Qatar, is the second largest FT plant in the world after Sasol's Secunda plant in South Africa. It uses cobalt catalysts at 230 °C, converting natural gas to petroleum liquids at a rate of 140,000 barrels per day (22,000 m3/d), with additional production of 120,000 barrels (19,000 m3) of oil equivalent in natural gas liquids and ethane.

Another plant in Ras Laffan, called Oryx GTL, has been commissioned in 2007 with a capacity of 34,000 barrels per day (5,400 m3/d). The plant utilizes the Sasol slurry phase distillate process, which uses a cobalt catalyst. Oryx GTL is a joint venture between QatarEnergy and Sasol.[29]

Sasol

[edit]
A SASOL garage in Gauteng
Main article: Sasol

The world's largest scale implementation of Fischer–Tropsch technology is a series of plants operated by Sasol in South Africa, a country with large coal reserves, but little oil. With a capacity of 165000 Bpd at its Secunda plant.[30] The first commercial plant opened in 1952.[31] Sasol uses coal and natural gas as feedstocks and produces a variety of synthetic petroleum products, including most of the country's diesel fuel.[32]

PetroSA

[edit]

PetroSA, another South African company, operates a refinery with a 36,000 barrels a day plant that completed semi-commercial demonstration in 2011, paving the way to begin commercial preparation. The technology can be used to convert natural gas, biomass or coal into synthetic fuels.[33]

Shell middle distillate synthesis

[edit]

One of the largest implementations of Fischer–Tropsch technology is in Bintulu, Malaysia. This Shell facility converts natural gas into low-sulfur Diesel fuels and food-grade wax. The scale is 12,000 barrels per day (1,900 m3/d).

Velocys

[edit]

Construction is underway for Velocys' commercial reference plant incorporating its microchannel Fischer–Tropsch technology; ENVIA Energy's Oklahoma City GTL project being built adjacent to Waste Management's East Oak landfill site. The project is being financed by a joint venture between Waste Management, NRG Energy, Ventech and Velocys. The feedstock for this plant will be a combination of landfill gas and pipeline natural gas.[34]

SGCE

[edit]

Starting as a biomass technology licensor [35] In Summer of 2012 SGC Energia (SGCE) successfully commissioned a pilot multi tubular Fischer–Tropsch process unit and associated product upgrading units at the Pasadena, Tx Technology Center. The technology center focused on the development and operations of their XTLH solution which optimized processing of low value carbon waste streams into advanced fuels and wax products.[36] This unit also serves as an operations training environment for the 1100 BPD Juniper GTL facility constructed in Westlake, LA.

UPM (Finland)

[edit]

In October 2006, Finnish paper and pulp manufacturer UPM announced its plans to produce biodiesel by the Fischer–Tropsch process alongside the manufacturing processes at its European paper and pulp plants, using waste biomass resulting from paper and pulp manufacturing processes as source material.[37]

Rentech

[edit]

A demonstration-scale Fischer–Tropsch plant was built and operated by Rentech, Inc., in partnership with ClearFuels, a company specializing in biomass gasification. Located in Commerce City, Colorado, the facility produces about 10 barrels per day (1.6 m3/d) of fuels from natural gas. Commercial-scale facilities were planned for Rialto, California; Natchez, Mississippi; Port St. Joe, Florida; and White River, Ontario.[38] Rentech closed down their pilot plant in 2013, and abandoned work on their FT process as well as the proposed commercial facilities.

INFRA GTL Technology

[edit]

In 2010, INFRA built a compact Pilot Plant for conversion of natural gas into synthetic oil. The plant modeled the full cycle of the GTL chemical process including the intake of pipeline gas, sulfur removal, steam methane reforming, syngas conditioning, and Fischer–Tropsch synthesis. In 2013 the first pilot plant was acquired by VNIIGAZ Gazprom LLC. In 2014 INFRA commissioned and operated on a continuous basis a new, larger scale full cycle Pilot Plant. It represents the second generation of INFRA's testing facility and is differentiated by a high degree of automation and extensive data gathering system. In 2015, INFRA built its own catalyst factory in Troitsk (Moscow, Russia). The catalyst factory has a capacity of over 15 tons per year, and produces the unique proprietary Fischer–Tropsch catalysts developed by the company's R&D division. In 2016, INFRA designed and built a modular, transportable GTL (gas-to-liquid) M100 plant for processing natural and associated gas into synthetic crude oil in Wharton (Texas, USA). The M100 plant is operating as a technology demonstration unit, R&D platform for catalyst refinement, and economic model to scale the Infra GTL process into larger and more efficient plants.[39]

Other

[edit]

In the United States and India, some coal-producing states have invested in Fischer–Tropsch plants. In Pennsylvania, Waste Management and Processors, Inc. was funded by the state to implement FT technology licensed from Shell and Sasol to convert so-called waste coal (leftovers from the mining process) into low-sulfur diesel fuel.[40][41]

Research developments

[edit]

Choren Industries has built a plant in Germany that converts biomass to syngas and fuels using the Shell FT process structure. The company went bankrupt in 2011 due to impracticalities in the process.[42][43]

Biomass gasification (BG) and Fischer–Tropsch (FT) synthesis can in principle be combined to produce renewable transportation fuels (biofuels).[44]

In partnership with Sunfire, Audi produces E-diesel in small scale with two steps, the second one being FT.[45]

U.S. Air Force certification

[edit]

Syntroleum, a publicly traded United States company, has produced over 400,000 U.S. gallons (1,500,000 L) of diesel and jet fuel from the Fischer–Tropsch process using natural gas and coal at its demonstration plant near Tulsa, Oklahoma. Syntroleum is working to commercialize its licensed Fischer–Tropsch technology via coal-to-liquid plants in the United States, China, and Germany, as well as gas-to-liquid plants internationally. Using natural gas as a feedstock, the ultra-clean, low sulfur fuel has been tested extensively by the United States Department of Energy and the United States Department of Transportation. Syntroleum has worked to develop a synthetic jet fuel blend that will help the Air Force to reduce its dependence on imported petroleum. The Air Force, which is the United States military's largest user of fuel, began exploring alternative fuel sources in 1999. On December 15, 2006, a B-52 took off from Edwards Air Force Base, California for the first time powered solely by a 50–50 blend of JP-8 and Syntroleum's FT fuel. The seven-hour flight test was considered a success. The goal of the flight test program is to qualify the fuel blend for fleet use on the service's B-52s, and then flight test and qualification on other aircraft. The test program concluded in 2007. This program is part of the Department of Defense Assured Fuel Initiative, an effort to develop secure domestic sources for the military energy needs. The Pentagon hopes to reduce its use of crude oil from foreign producers and obtain about half of its aviation fuel from alternative sources by 2016.[46]

Carbon dioxide reuse

[edit]

Carbon dioxide is not a typical feedstock for FT catalysis. Hydrogen and carbon dioxide react over a cobalt-based catalyst, producing methane. With iron-based catalysts unsaturated short-chain hydrocarbons are also produced.[47] Upon introduction to the catalyst's support, ceria functions as a reverse water-gas shift catalyst, further increasing the yield of the reaction.[48] The short-chain hydrocarbons were upgraded to liquid fuels over solid acid catalysts, such as zeolites.

Process efficiency

[edit]

Using conventional FT technology the process ranges in carbon efficiency from 25 to 50 percent[49] and a thermal efficiency of about 50%[50] for CTL facilities idealised at 60%[51] with GTL facilities at about 60%[50] efficiency idealised to 80%[51] efficiency.

Fischer–Tropsch in nature

[edit]

A Fischer–Tropsch-type process has also been suggested to have produced a few of the building blocks of DNA and RNA within asteroids.[52] Similarly, the hypothetical abiogenic petroleum formation requires some naturally occurring FT-like processes.

Biological Fischer-Tropsch-type chemistry can be carried out by the enzyme nitrogenase at ambient conditions.[53][54]

See also

[edit]
  • Bergius process – method of production of liquid hydrocarbons for use as synthetic fuel
  • Coal gasification – Production of syngas from coal
  • Fischer assay – standardized laboratory test for determining the oil yield from a conventional shale
  • Hydrogenation – Chemical reaction between molecular hydrogen and another compound or element, a generic term for this type of process
  • Hubbert peak theory – One of the primary theories on peak oil
  • Industrial gas – Gaseous materials produced for use in industry
  • Karrick process – low temperature carbonization process
  • Sabatier reaction – Methanation process of carbon dioxide with hydrogen
  • Steam methane reforming – Method for producing hydrogen and carbon monoxide from hydrocarbon fuels
  • Synthetic Liquid Fuels Program – US-program

References

[edit]
  1. ^ Höök, Mikael; Fantazzini, Dean; Angelantoni, André; Snowden, Simon (2013). "Hydrocarbon liquefaction: viability as a peak oil mitigation strategy". Philosophical Transactions of the Royal Society A. 372 (2006): 20120319. Bibcode:2013RSPTA.37220319H. doi:10.1098/rsta.2012.0319. PMID 24298075. Archived from the original on 2019-03-28. Retrieved 2009-06-03.
  2. ^ "U.S. Product Supplied for Crude Oil and Petroleum Products". tonto.eia.doe.gov. Archived from the original on 28 February 2011. Retrieved 3 April 2018.
  3. ^ Davis, S.J., Lewis, N.S., Shaner, M., Aggarwal, S., Arent, D., Azevedo, I.L., Benson, S.M., Bradley, T., Brouwer, J., Chiang, Y.M. and Clack, C.T., 2018. Net-zero emissions energy systems. Science, 360(6396), p.eaas9793
  4. ^ Chen, Chi; Garedew, Mahlet; Sheehan, Stafford W. (2022). "Single-Step Production of Alcohols and Paraffins from CO2 and H2 at Metric Ton Scale". ACS Energy Letters. 7 (3): 988–992. doi:10.1021/acsenergylett.2c00214. S2CID 246930138.
  5. ^ Trakimavicius, Lukas (December 2023). "Mission Net-Zero: Charting the Path for E-fuels in the Military". NATO Energy Security Centre of Excellence.
  6. ^ Arno de Klerk (2013). "Fischer–Tropsch Process". Kirk-Othmer Encyclopedia of Chemical Technology. Weinheim: Wiley-VCH. pp. 1–20. doi:10.1002/0471238961.fiscdekl.a01. ISBN 978-0471238966.
  7. ^ a b c Dry, Mark E. (2002). "The Fischer–Tropsch process: 1950–2000". Catalysis Today. 71 (3–4): 227–241. doi:10.1016/S0920-5861(01)00453-9.
  8. ^ a b c Kaneko, Takao; Derbyshire, Frank; Makino, Eiichiro; Gray, David; Tamura, Masaaki (2001). "Coal Liquefaction". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a07_197. ISBN 9783527306732.
  9. ^ Fratalocchi, Laura; Visconti, Carlo Giorgio; Groppi, Gianpiero; Lietti, Luca; Tronconi, Enrico (2018). "Intensifying heat transfer in Fischer-Tropsch tubular reactors through the adoption of conductive packed foams". Chemical Engineering Journal. 349: 829–837. doi:10.1016/j.cej.2018.05.108. hdl:11311/1072010. ISSN 1385-8947. S2CID 103286686.
  10. ^ Gates, Bruce C. (February 1993). "Extending the Metal Cluster-Metal Surface Analogy". Angewandte Chemie International Edition in English. 32 (2): 228–229. doi:10.1002/anie.199302281.
  11. ^ a b Schulz, H. (1999). "Short history and Present Trends of Fischer-Tropsch Synthesis". Applied Catalysis A: General. 186 (1–2): 3–12. doi:10.1016/S0926-860X(99)00160-X.
  12. ^ Sasidhar, Nallapaneni (November 2023). "Carbon Neutral Fuels and Chemicals from Standalone Biomass Refineries" (PDF). Indian Journal of Environment Engineering. 3 (2): 1–8. doi:10.54105/ijee.B1845.113223. ISSN 2582-9289. S2CID 265385618. Retrieved 3 December 2023.
  13. ^ Moulijn, Jacob A.; Makkee, Michiel; van Diepen, Annelies E. (May 2013). Chemical Process Technology. Wiley. pp. 193–200. ISBN 978-1-4443-2025-1.
  14. ^ Spath, P. L.; Dayton, D. C. (December 2003). "Preliminary Screening — Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas" (PDF). NREL/TP510-34929. National Renewable Energy Laboratory. p. 95. Archived from the original (PDF) on 2008-12-17. Retrieved 2008-06-12.
  15. ^ Deutschmann, Olaf; Knözinger, Helmut; Kochloefl, Karl; Turek, Thomas (2011). "Heterogeneous Catalysis and Solid Catalysts, 3. Industrial Applications". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.o05_o03. ISBN 978-3527306732.
  16. ^ a b Khodakov, Andrei Y.; Chu, Wei; Fongarland, Pascal (2007-05-01). "Advances in the Development of Novel Cobalt Fischer−Tropsch Catalysts for Synthesis of Long-Chain Hydrocarbons and Clean Fuels". Chemical Reviews. 107 (5): 1692–1744. doi:10.1021/cr050972v. ISSN 0009-2665. PMID 17488058.
  17. ^ "Gas to Liquids (GTL) Technology". Archived from the original on 16 April 2015. Retrieved 15 May 2015.
  18. ^ a b Balonek, Christine M.; Lillebø, Andreas H.; Rane, Shreyas; Rytter, Erling; Schmidt, Lanny D.; Holmen, Anders (2010-08-01). "Effect of Alkali Metal Impurities on Co–Re Catalysts for Fischer–Tropsch Synthesis from Biomass-Derived Syngas". Catalysis Letters. 138 (1–2): 8–13. doi:10.1007/s10562-010-0366-4. ISSN 1011-372X. S2CID 98234730.
  19. ^ Hoque, Md Ariful; Guzman, Marcelo I.; Selegue, John P.; Gnanamani, Muthu Kumaran (2022-10-21). "Chemical State of Potassium on the Surface of Iron Oxides: Effects of Potassium Precursor Concentration and Calcination Temperature". Materials. 15 (20): 7378. Bibcode:2022Mate...15.7378H. doi:10.3390/ma15207378. ISSN 1996-1944. PMC 9610504. PMID 36295443.
  20. ^ US 1746464, issued 1930-02-11 
  21. ^ a b Leckel, Dieter (2009-05-21). "Diesel Production from Fischer−Tropsch: The Past, the Present, and New Concepts". Energy & Fuels. 23 (5): 2342–2358. doi:10.1021/ef900064c. ISSN 0887-0624.
  22. ^ "German Synthetic Fuels Scientists". Archived from the original on 24 September 2015. Retrieved 15 May 2015.
  23. ^ For example, British Patent No. 573,982, applied 1941, published 1945"Improvements in or relating to Methods of Producing Hydrocarbon Oils from Gaseous Mixtures of Hydrogen and Carbon Monoxide" (PDF). January 14, 1941. Archived from the original (PDF) on December 17, 2008. Retrieved 2008-11-09.
  24. ^ Imhausen, Arthur (1943). "Die Fettsäure-Synthese und ihre Bedeutung für die Sicherung der deutschen Fettversorgung". Kolloid-Zeitschrift. 103 (2): 105–108. doi:10.1007/BF01502087. S2CID 93119728.
  25. ^ Whitmore, Frank C. (1951). Organic Chemistry. Dover Publications Inc. p. 256.
  26. ^ a b "Synthetic Soap and Edible Fats". Chemical Age. 54: 308. 1946.
  27. ^ Maier, Elke (April 2016). "Coal-in Liquid Form" (PDF). Max Planck Research. Max-Planck-Gesellschaft. pp. 78–79. Archived (PDF) from the original on 2020-11-01. Retrieved 2019-12-19.
  28. ^ Ihde, Aaron J. (1964). The Development of Modern Chemistry. Harper & Row. p. 683.
  29. ^ Carl Mesters (2016). "A Selection of Recent Advances in C1 Chemistry". Annual Review of Chemical and Biomolecular Engineering. 7: 223–38. doi:10.1146/annurev-chembioeng-080615-034616. PMID 27276549.
  30. ^ Meleloe K.E.; Walwyn D.R. (2016-09-01). "Success factors for the commercialisation of Gas-to-Liquids technology". South African Journal of Business Management. 47 (3): 63–72. hdl:10520/EJC194106.
  31. ^ "Construction of World's First Synthesis Plant" Archived 2022-04-29 at the Wayback Machine Popular Mechanics, February 1952, p. 264, bottom of page.
  32. ^ "technologies & processes" Sasol Archived 2008-11-16 at the Wayback Machine
  33. ^ "PetroSA technology ready for next stage | Archive | BDlive". Businessday.co.za. 2011-05-10. Archived from the original on 2012-04-03. Retrieved 2013-06-05.
  34. ^ ""Setting the stage for the future of smaller-scale GTL", Gas Processing". August 2015. Archived from the original on 2015-09-09. Retrieved 2015-11-06.
  35. ^ "Frontline Bioenergy completes Series B financing, gasifier partnership with SGC Energia". April 2011. Archived from the original on 2022-01-03. Retrieved 2022-01-03.
  36. ^ "Successful Operation of a 1 BPD Fischer Tropsch Pilot Plant". AICHE. April 2013. Archived from the original on 2022-01-03. Retrieved 2022-01-03.
  37. ^ "UPM-Kymmene says to establish beachhead in biodiesel market". NewsRoom Finland. Archived from the original on 2007-03-17.
  38. ^ http://www.rentechinc.com/ Archived 2010-11-27 at the Wayback Machine (official site)
  39. ^ "GEO ExPro magazine" (PDF). Vol. 14, No. 4 – 2017 Pgs 14-17. Archived (PDF) from the original on 2018-08-21. Retrieved 2018-08-27.
  40. ^ "Governor Rendell leads with innovative solution to help address PA energy needs". State of Pennsylvania. Archived from the original on 2008-12-11.
  41. ^ "Schweitzer wants to convert Otter Creek coal into liquid fuel". Billings Gazette. August 2, 2005. Archived from the original on 2009-01-01.
  42. ^ [1] Choren official web site
  43. ^ "Fairley, Peter. Growing Biofuels – New production methods could transform the niche technology. MIT Technology Review November 23, 2005". Archived from the original on August 9, 2020. Retrieved August 29, 2020.
  44. ^ Inderwildi, Oliver R.; Jenkins, Stephen J.; King, David A. (2008). "Mechanistic Studies of Hydrocarbon Combustion and Synthesis on Noble Metals". Angewandte Chemie International Edition. 47 (28): 5253–5. doi:10.1002/anie.200800685. PMID 18528839. S2CID 34524430.
  45. ^ "Audi steps up research into carbon-neutral synthetic fuels with new e-diesel pilot plant; power-to-liquids". 2017-11-08.
  46. ^ Zamorano, Marti (2006-12-22). "B-52 synthetic fuel testing: Center commander pilots first Air Force B-52 flight using solely synthetic fuel blend in all eight engines". Aerotech News and Review.
  47. ^ Dorner, Robert; Dennis R. Hardy; Frederick W. Williams; Heather D. Willauer (2010). "Heterogeneous catalytic CO2 conversion to value-added hydrocarbons". Energy Environ. Sci. 3 (7): 884–890. doi:10.1039/C001514H.
  48. ^ Dorner, Robert. "Catalytic Support for use in Carbon Dioxide Hydrogenation Reactions". Archived from the original on 2014-09-11. Retrieved 2013-05-22.
  49. ^ Unruh, Dominik; Pabst, Kyra; Schaub, Georg (2010-04-15). "Fischer−Tropsch Synfuels from Biomass: Maximizing Carbon Efficiency and Hydrocarbon Yield". Energy & Fuels. 24 (4): 2634–2641. doi:10.1021/ef9009185. ISSN 0887-0624.
  50. ^ a b de Klerk 2011
  51. ^ a b "Archived copy" (PDF). Archived from the original (PDF) on 2017-04-28. Retrieved 2013-03-26.{{cite web}}: CS1 maint: archived copy as title (link)
  52. ^ Pearce, Ben K. D.; Pudritz, Ralph E. (2015). "Seeding the Pregenetic Earth: Meteoritic Abundances of Nucleobases and Potential Reaction Pathways". The Astrophysical Journal. 807 (1): 85. arXiv:1505.01465. Bibcode:2015ApJ...807...85P. doi:10.1088/0004-637X/807/1/85. S2CID 93561811.
  53. ^ Gerlach, Deidra L.; Lehnert, Nicolai (2011-08-22). "Fischer–Tropsch Chemistry at Room Temperature?". Angewandte Chemie International Edition. 50 (35): 7984–7986. doi:10.1002/anie.201102979. hdl:2027.42/87158. ISSN 1433-7851. PMID 21761528.
  54. ^ Lee, Chi Chung; Hu, Yilin; Ribbe, Markus W. (2010-08-06). "Vanadium Nitrogenase Reduces CO". Science. 329 (5992): 642. Bibcode:2010Sci...329..642L. doi:10.1126/science.1191455. ISSN 0036-8075. PMC 3141295. PMID 20689010.

Further reading

[edit]
[edit]
  • Modeling and Integration of Green-Hydrogen-Assisted Carbon Dioxide Utilization for Hydrocarbon Manufacturing [2]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Fischer–Tropsch_process&oldid=1260978424"