DescriptionTwo carrier 3rd order intermod measurement.png
English: A non-linear amplifier was swept over a 29 dB power range in 1 dB increments with 2 carriers spaced 1 MHz apart (M1, M2).
The non-linear amplifier produces undesirable intermodulation products (D3, D4) at 2*f1-f2 (D3) and 2*f2-f1 (D4). Note that the 3rd order intermods grow by 3 dB for every 1 dB increase in input power, while the carriers increase by 1 dB for every 1 dB increase in input power. The spectrum becomes highly distorted at higher power levels as the odd order intermod products (3rd, 5th, 7th, 9th, ...) increase in level with respect to the carriers. An nth order intermod grows by n dB for every 1 dB increase in input power.
I captured these screenshots from a Rohde & Schwarz FSW spectrum analyzer (non-free software) and created the animation myself. Usage of these screenshots constitutes fair use.
Date
Source
I measured the intermodulation characteristics of an amplifier myself on a spectrum analyzer
I, the copyright holder of this work, hereby publish it under the following licenses:
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
A nonlinear system produces unwanted intermodulation products (D3, D4) with a 2 tones stimulus (M1, M2)
Please mind the following: M2 - M1 = 1.0005 GHz - 999.5 MHz = (1000.5 - 999.5) MHz = 1 MHz = the width of each column on the display. Chart centered at 1 GHz = 1000.00 MHz. The D4 frequency should be almost (1000.00+1.5) MHz = 1001.5 MHz, in the span
Please mind the following: M2 - M1 = 1.0005 GHz - 999.5 MHz = (1000.5 - 999.5) MHz = 1 MHz = the width of each column on the display. Chart centered at 1 GHz = 1000.00 MHz. The D4 frequency should be almost (1000.00+1.5) MHz = 1001.5 MHz, in the span
Please mind the following: M2 - M1 = 1.0005 GHz - 999.5 MHz = (1000.5 - 999.5) MHz = 1 MHz = the width of each column on the display. Chart centered at 1 GHz = 1000.00 MHz. The D4 frequency should be almost (1000.00+1.5) MHz = 1001.5 MHz, in the span
{{subst:Upload marker added by en.wp UW}} {{Information |Description = {{en|A non-linear amplifier was swept over a 29 dB power range in 1 dB increments with 2 carriers spaced 1 MHz apart (M1, M2). The non-linear amplifier produces undesirable intermodulation products (D3, D4) at 2*f1-f2 (D3) and 2*f2-f1 (D4). Note that the 3rd order intermods grow by 3 dB for every 1 dB increase in input power, while the carriers increase by 1 dB for every 1 dB increase in input power. The spectrum becomes...
File usage
No pages on the English Wikipedia use this file (pages on other projects are not listed).
Metadata
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.