File:Toggle Trigger Enabler on Propeller Aircraft with Machine Guns.gif

No higher resolution available.

Toggle_Trigger_Enabler_on_Propeller_Aircraft_with_Machine_Guns.gif (800 × 408 pixels, file size: 970 KB, MIME type: image/gif, looped, 147 frames, 7.3 s)

This is a file from the Wikimedia Commons. Information from its description page there is shown below.
Commons is a freely licensed media file repository. You can help.

Summary

Description

English: Diagram of how a "trigger enabler" works on a propeller aircraft equipped with machine guns. Pilots can push the trigger enabler to enable the cam follower.

Trigger enabler

Trigger lever

Gun trigger

Coupling piece

Push rod

Cam follower

Cam & shaft (shown in both front view and lateral view)

Technical ref: https://hackaday.com/2018/04/25/firing-bullets-through-propellers/

Date

19 August 2022

Source

Own work

Author

燃灯

Other versions

[edit]

static diagram (Blank) (PNG)
static diagram (English) (PNG)
static diagram (SVG)
enabling sequence (GIF)
firing sequence (GIF)

GIF development

This diagram was created with Figma.

This diagram was improved or created by the Wikigraphists of the Graphic Lab (Commons).
You can propose images to clean up, improve, create or translate as well.

Licensing

I, the copyright holder of this work, hereby publish it under the following license:

This file is licensed under the Creative Commons Attribution 4.0 International license.

You are free:

to share – to copy, distribute and transmit the work
to remix – to adapt the work

Under the following conditions:

attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

Quality image

This image has been assessed using the Quality image guidelines and is considered a Quality image.

العربية ∙ جازايرية ∙ беларуская ∙ беларуская (тарашкевіца) ∙ български ∙ বাংলা ∙ català ∙ čeština ∙ Cymraeg ∙ Deutsch ∙ Schweizer Hochdeutsch ∙ Zazaki ∙ Ελληνικά ∙ English ∙ Esperanto ∙ español ∙ eesti ∙ euskara ∙ فارسی ∙ suomi ∙ français ∙ galego ∙ עברית ∙ हिन्दी ∙ hrvatski ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ Jawa ∙ ქართული ∙ кыргызча ∙ 한국어 ∙ kurdî ∙ Lëtzebuergesch ∙ lietuvių ∙ македонски ∙ മലയാളം ∙ मराठी ∙ Bahasa Melayu ∙ Nederlands ∙ Norfuk / Pitkern ∙ polski ∙ português ∙ português do Brasil ∙ qaraqalpaqsha ∙ rumantsch ∙ română ∙ русский ∙ sicilianu ∙ slovenčina ∙ slovenščina ∙ shqip ∙ српски / srpski ∙ svenska ∙ தமிழ் ∙ తెలుగు ∙ ไทย ∙ Tagalog ∙ toki pona ∙ Türkçe ∙ українська ∙ Oʻzbekcha ∙ vèneto ∙ Tiếng Việt ∙ 中文 ∙ 中文（简体） ∙ 中文（繁體） ∙ +/−

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	23:03, 21 August 2022	800 × 408 (970 KB)	痛	Attach that red spring to the frame
	21:36, 21 August 2022	800 × 408 (988 KB)	痛	There's always some little details
	20:04, 21 August 2022	800 × 408 (1.46 MB)	痛	ehhahahahahaaa
	19:51, 21 August 2022	800 × 408 (1.51 MB)	痛	Frame rate; move the white bar on the red coupling piece a bit to the left
	21:21, 20 August 2022	600 × 304 (756 KB)	痛	Adjust the red coupling piece's behavior
	15:37, 20 August 2022	600 × 304 (998 KB)	痛	make pushing rod bounce too
	03:25, 20 August 2022	540 × 274 (824 KB)	痛	Shrink size and rotate prop the other direction
	03:01, 20 August 2022	563 × 285 (1.14 MB)	痛	Uploaded own work with UploadWizard