Jump to content

File:Kim-1-computer.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Kim-1-computer.jpg (640 × 480 pixels, file size: 93 KB, MIME type: image/jpeg)

KIM-1 Single board computer purchased 1980. This 6502 based system has 1K RAM, and two 1 K ROMs containing a monitor program. Input and output was through the keypad and 7-segment LED display, though the KIM could also be connected to a teletypewriter. This development board was an inexpensive way for hobbyists and small companies to learn more about the 6502 processor. This particular board has the Commodore logo and bears serial number 12674. In this picture the KIM is shown lying on the schematic diagram partly visible. The small aluminum box at the lower left side is a home-made expansion interface for connection of peripherals such as an audio cassette recorder. This image is released to the public domain.

Copied from English Wikipedia

http://en.wikipedia.org/wiki/Image:Kim-1-computer.jpg

Public domain This work has been released into the public domain by its author, en:Wtshymanski. This applies worldwide.

In some countries this may not be legally possible; if so:
en:Wtshymanski grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:25, 13 November 2005Thumbnail for version as of 20:25, 13 November 2005640 × 480 (93 KB)GermanKIM-1 Single board computer purchased 1980. This 6502 based system has 1K RAM, and two 1 K ROMs containing a monitor program. Input and output was through the keypad and 7-segment LED display, though the KIM could also be connected to a teletype. This dev

The following page uses this file:

Global file usage

The following other wikis use this file:

Metadata