File:ANSI-ISA SP76 mechanical footprint.jpg
No higher resolution available.
ANSI-ISA_SP76_mechanical_footprint.jpg (543 × 294 pixels, file size: 25 KB, MIME type: image/jpeg)
 | This is a file from the Wikimedia Commons. Information from its description page there is shown below. Commons is a freely licensed media file repository. You can help. |
Summary
| Description |
English: Open Standard design per ISA SP76 -The ANSI/ISA SP76.00.02-2002 standard defines dimensions and porting. |
| Source | ANSI/ISA SP76.00.02-2002 standard |
| Author | US Gov |
|
This image could be re-created using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with
{{vector version available|new image name}}.
It is recommended to name the SVG file “ANSI-ISA SP76 mechanical footprint.svg”—then the template Vector version available (or Vva) does not need the new image name parameter. |
 | This image was uploaded in the JPEG format even though it consists of non-photographic data. This information could be stored more efficiently or accurately in the PNG or SVG format. If possible, please upload a PNG or SVG version of this image without compression artifacts, derived from a non-JPEG source (or with existing artifacts removed). After doing so, please tag the JPEG version with {{Superseded|NewImage.ext}} and remove this tag. This tag should not be applied to photographs or scans. If this image is a diagram or other image suitable for vectorisation, please tag this image with {{Convert to SVG}} instead of {{BadJPEG}}. If not suitable for vectorisation, use {{Convert to PNG}}. For more information, see {{BadJPEG}}. |  |
Licensing
|
This work is in the public domain in the United States because it is a work prepared by an officer or employee of the United States Government as part of that person’s official duties under the terms of Title 17, Chapter 1, Section 105 of the US Code.
Note: This only applies to original works of the Federal Government and not to the work of any individual U.S. state, territory, commonwealth, county, municipality, or any other subdivision. This template also does not apply to postage stamp designs published by the United States Postal Service since 1978. (See § 313.6(C)(1) of Compendium of U.S. Copyright Office Practices). It also does not apply to certain US coins; see The US Mint Terms of Use.
|
 |
| This file has been identified as being free of known restrictions under copyright law, including all related and neighboring rights. | ||
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 03:16, 25 January 2007 | | 543 × 294 (25 KB) | CIRCORTech | Publically available ISA description of the NeSSI footprint |
| 02:47, 25 January 2007 |  | 543 × 294 (25 KB) | CIRCORTech | Open Standard design per ISA SP76 |
File usage
The following 2 pages use this file:
