English: MaxLinear (MxL 7704) Voltage regulator from a raspberry pi 3B+. I accidentally fried this by inadvertently shorting some pins on my pi. I did not see any visible damage on the epoxy casing or the die.
The MaxLinear logo, date (MAR 17) and other symbols are visible slightly down and to the left from the centre of the die.
The model number "MXL7704" is also inscribed on the right, midway between the centre and top of the die.
This is a composite of 56 images taken by a pixel 2XL from a microscope at 100X. The images had 65% overlap and were stitched together in Microsoft Image Composite Editor using the structured panorama mode.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.